| 2024 |
Multifunctional green composites based on plasma-activated and GO-coated dwarf palm fibers |
Articolo in rivista |
Go to |
| 2024 |
Electrospun polymeric nanohybrids with outstanding pollutants adsorption and electroactivity for water treatment and sensing devices |
Articolo in rivista |
Go to |
| 2024 |
Multifunctional 3D-printed composites based on biopolymeric matrices and tomato plant (Solanum lycopersicum) waste for contextual fertilizer release and Cu(II) ions removal |
Articolo in rivista |
Go to |
| 2024 |
Stable and reusable electrospun bio-composite fibrous membranes based on PLA and natural fillers for air filtration applications |
Articolo in rivista |
Go to |
| 2024 |
Innovative 3D-printed devices for water pollutant removal: Comprehensive review on printing parameters, composition, properties and performances of the latest 3D-systems |
Articolo in rivista |
Go to |
| 2024 |
Chemical-free Reactive Melt Processing of Biosourced Poly(butylene-succinate-adipate) for Improved Mechanical Properties and Recyclability |
Articolo in rivista |
Go to |
| 2024 |
Composite RGO/Ag/Nanosponge Materials for the Photodegradation of Emerging Pollutants from Wastewaters |
Articolo in rivista |
Go to |
| 2023 |
Bacterial biofilms on biopolymeric sorbent supports for environmental bioremediation |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2023 |
Biodegradable Membrane with High Porosity and Hollow Structure Obtained via Electrospinning for Oil Spill Clean-up Application |
Articolo in rivista |
Go to |
| 2023 |
Influence of Different Environments and Temperatures on the Photo-Oxidation Behaviour of the Polypropylene |
Articolo in rivista |
Go to |
| 2023 |
Nanofibrous Polymeric Membranes for Air Filtration Application: A Review of Progress after the COVID-19 Pandemic |
Articolo in rivista |
Go to |
| 2023 |
Comparison of the Recycling Behavior of a Polypropylene Sample Aged in Air and in Marine Water |
Articolo in rivista |
Go to |
| 2023 |
Green Composites Based on Mater-Bi® and Solanum lycopersicum Plant Waste for 3D Printing Applications |
Articolo in rivista |
Go to |
| 2023 |
Biodegrading biofilms on biopolymeric sorbent scaffolds |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2023 |
Recent Developments and Formulations for Hydrophobic Modification of Carrageenan Bionanocomposites |
Review essay (rassegna critica) |
Go to |
| 2023 |
Hierarchically Structured Hybrid Membranes for Continuous Wastewater Treatment via the Integration of Adsorption and Membrane Ultrafiltration Mechanisms |
Articolo in rivista |
Go to |
| 2023 |
Influence of Branching on the Rheology, Filmability and Mechanical and Optical Properties of a Biodegradable and Compostable Co-Polyester |
Articolo in rivista |
Go to |
| 2023 |
Sustained-Release Powders Based on Polymer Particles for Pulmonary Delivery of Beclomethasone Dipropionate in the Treatment of Lung Inflammation |
Articolo in rivista |
Go to |
| 2023 |
Release Profiles of Carvacrol or Chlorhexidine of PLA/Graphene Nanoplatelets Membranes Prepared Using Electrospinning and Solution Blow Spinning: A Comparative Study |
Articolo in rivista |
Go to |
| 2022 |
Ultrasensitive and highly specific detection of iodine ions using zirconium (IV)-enhanced oxidation |
Articolo in rivista |
Go to |
| 2022 |
Hedysarum coronarium-Based Green Composites Prepared by Compression Molding and Fused Deposition Modeling |
Articolo in rivista |
Go to |
| 2022 |
An innovative route to prepare in situ graded crosslinked PVA graphene electrospun mats for drug release |
Articolo in rivista |
Go to |
| 2022 |
Green Composites Based on Hedysarum coronarium with Outstanding FDM Printability and Mechanical Performance |
Articolo in rivista |
Go to |
| 2022 |
Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications |
Articolo in rivista |
Go to |
| 2022 |
BIODEGRADING BIOFILMS ON INNOVATIVE BIOPOLYMERIC SUPPORTS |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2022 |
Hybrid biocomposites based on polylactic acid and natural fillers from Chamaerops humilis dwarf palm and Posidonia oceanica leaves |
Articolo in rivista |
Go to |
| 2022 |
Wet electrospinning-aided self-assembly of multifunctional GO-CNT@PCL core-shell nanocomposites with spider leg bioinspired hierarchical architectures |
Articolo in rivista |
Go to |
| 2022 |
Modelling the structure-property relationships of high performance PBAT-based biocomposites with natural fibers obtained from Chamaerops humilis dwarf palm |
Articolo in rivista |
Go to |
| 2022 |
Opuntia Ficus Indica based green composites for NPK fertilizer controlled release produced by compression molding and fused deposition modeling |
Articolo in rivista |
Go to |
| 2021 |
Effect of alkyl derivatization of gellan gum during the fabrication of electrospun membranes |
Articolo in rivista |
Go to |
| 2021 |
Ionic tactile sensors as promising biomaterials for artificial skin: Review of latest advances and future perspectives |
Review essay (rassegna critica) |
Go to |
| 2021 |
Plastica in mare: biodiversità della plastisfera |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2021 |
A new methodological approach to correlate protective and microscopic properties by soft x-ray microscopy and solid state nmr spectroscopy: The case of cusa’s stone |
Articolo in rivista |
Go to |
| 2021 |
Green composites based on pla and agricultural or marine waste prepared by fdm |
Articolo in rivista |
Go to |
| 2021 |
An overview of functionalized graphene nanomaterials for advanced applications |
Review essay (rassegna critica) |
Go to |
| 2021 |
Hydrolytic degradation of PLA/Posidonia Oceanica green composites: A simple model based on starting morpho-chemical properties |
Articolo in rivista |
Go to |
| 2021 |
Effect of an organoclay on the photochemical transformations of a PBAT/PLA blend and morpho-chemical features of crosslinked networks |
Articolo in rivista |
Go to |
| 2020 |
Collapsible intact soil stabilisation using non-aqueous polymeric vehicle |
Articolo in rivista |
Go to |
| 2020 |
Innovative, ecofriendly biosorbent-biodegrading biofilms for bioremediation of oil- contaminated water |
Articolo in rivista |
Go to |
| 2020 |
Graphene Oxide Carboxymethylcellulose Nanocomposite for Dressing Materials |
Articolo in rivista |
Go to |
| 2020 |
Structure–property relationship and controlled drug release from multiphasic electrospun carvacrol-embedded polylactic acid/polyethylene glycol and polylactic acid/polyethylene oxide nanofiber mats |
Articolo in rivista |
Go to |
| 2020 |
Rapid One-Step Fabrication of Graphene Oxide-Decorated Polycaprolactone Three-Dimensional Templates for Water Treatment |
Articolo in rivista |
Go to |
| 2020 |
Bilayer biodegradable films prepared by co-extrusion film blowing: Mechanical performance, release kinetics of an antimicrobial agent and hydrolytic degradation |
Articolo in rivista |
Go to |
| 2020 |
Processing-structure-property relationships of electrospun PLA-PEO membranes reinforced with enzymatic cellulose nanofibers |
Articolo in rivista |
Go to |
| 2020 |
Poly(lactic acid)/carvacrol-based materials: preparation, physicochemical properties, and antimicrobial activity |
Review essay (rassegna critica) |
Go to |
| 2020 |
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting |
Articolo in rivista |
Go to |
| 2020 |
The effects of nanoclay on the mechanical properties, carvacrol release and degradation of a pla/pbat blend |
Articolo in rivista |
Go to |
| 2020 |
Lignocellulosic fillers and graphene nanoplatelets as hybrid reinforcement for polylactic acid: Effect on mechanical properties and degradability |
Articolo in rivista |
Go to |
| 2020 |
Flexible mats as promising antimicrobial systems via integration of Thymus capitatus (L.) essential oil into PLA |
Articolo in rivista |
Go to |
| 2019 |
Structure-property relationship of PLA-Opuntia Ficus Indica biocomposites |
Articolo in rivista |
Go to |
| 2019 |
Effect of graphene and fabrication technique on the release kinetics of carvacrol from polylactic acid |
Articolo in rivista |
Go to |
| 2019 |
Influence of oxidation level of graphene oxide on the mechanical performance and photo-oxidation resistance of a polyamide 6 |
Articolo in rivista |
Go to |
| 2019 |
Degradation and recycling of films based on biodegradable polymers: A short review |
Articolo in rivista |
Go to |
| 2019 |
Antibacterial biopolymeric foams: Structure–property relationship and carvacrol release kinetics |
Articolo in rivista |
Go to |
| 2019 |
Tunable release of Chlorhexidine from Polycaprolactone-based filaments containing graphene nanoplatelets |
Articolo in rivista |
Go to |
| 2019 |
Integrated ternary bionanocomposites with superior mechanical performance via the synergistic role of graphene and plasma treated carbon nanotubes |
Articolo in rivista |
Go to |
| 2019 |
The early plastisphere of biodegradable and non-biodegradable plastic films in marine environment |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2019 |
Functionalization of Graphene with Molecules and/or Nanoparticles for Advanced Applications |
Capitolo o Saggio |
Go to |
| 2019 |
Optimization of two-step techniques engineered for the preparation of polyamide 6 graphene oxide nanocomposites |
Articolo in rivista |
Go to |
| 2018 |
Perfluorocarbons-graphene oxide nanoplatforms as biocompatible oxygen reservoirs |
Articolo in rivista |
Go to |
| 2018 |
Collapsibility of metastable sand by non-conventional oedometer tests |
Abstract in rivista |
Go to |
| 2018 |
Thermomechanical Characterization of Polylactic Acid and Composites |
Paper non pubblicato |
Go to |
| 2018 |
Advanced piezoresistive sensor achieved by amphiphilic nanointerfaces of graphene oxide and biodegradable polymer blends |
Articolo in rivista |
Go to |
| 2018 |
Biopolymeric bilayer films produced by co-extrusion film blowing |
Articolo in rivista |
Go to |
| 2018 |
Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets |
Articolo in rivista |
Go to |
| 2018 |
Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes |
Articolo in rivista |
Go to |
| 2018 |
Efficacy of poly(lactic acid)/carvacrol electrospun membranes against Staphylococcus aureus and Candida albicans in single and mixed cultures |
Articolo in rivista |
Go to |
| 2018 |
Antimicrobial additives for poly(lactic acid) materials and their applications: current state and perspectives |
Articolo in rivista |
Go to |
| 2018 |
Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves |
Articolo in rivista |
Go to |
| 2018 |
PLA based biocomposites reinforced with Posidonia oceanica leaves |
Articolo in rivista |
Go to |
| 2018 |
Caratterizzazione termomeccanica dell’acido polilattico e due suoi compositi |
Articolo in rivista |
Go to |
| 2018 |
Synchronizing the release rates of salicylate and indomethacin from degradable chitosan hydrogel and its optimization by definitive screening design |
Articolo in rivista |
Go to |
| 2018 |
Innovative ready to use carrier-bacteria devices for bioremediation of oil contaminated water |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2018 |
Reprocessing of PLA/graphene nanoplatelets nanocomposites |
Articolo in rivista |
Go to |
| 2017 |
PLA graphene nanoplatelets nanocomposites: Physical properties and release kinetics of an antimicrobial agent |
Articolo in rivista |
Go to |
| 2017 |
Polysaccharide nanocrystals as fillers for PLA based nanocomposites |
Articolo in rivista |
Go to |
| 2017 |
Experimental analysis and micromechanical models of high performance renewable agave reinforced biocomposites |
Articolo in rivista |
Go to |
| 2017 |
Structural and thermal stability of graphene oxide-silica nanoparticles nanocomposites |
Articolo in rivista |
Go to |
| 2017 |
Nanocarbons in electrospun polymeric nanomats for tissue engineering: A review |
Articolo in rivista |
Go to |
| 2017 |
Using Taguchi method for the optimization of processing variables to prepare porous scaffolds by combined melt mixing/particulate leaching |
Articolo in rivista |
Go to |
| 2017 |
Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning |
Articolo in rivista |
Go to |
| 2017 |
Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water: Porous PCL system obtained by leaching melt mixed PCL/PEG/NaCl composites: Oil uptake performance and bioremediation efficiency |
Articolo in rivista |
Go to |
| 2017 |
Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes |
Poster pubblicato in volume |
Go to |
| 2017 |
In-process material characterization at constant extrusion conditions: application to clay/PLA bionanocomposites |
Contributo in atti di convegno pubblicato in volume |
Go to |
| 2017 |
Degradation of polymer blends: A brief review |
Articolo in rivista |
Go to |
| 2017 |
Structure-properties relationships in melt reprocessed PLA/hydrotalcites nanocomposites |
Articolo in rivista |
Go to |
| 2017 |
Development of polymeric functionally graded scaffolds: A brief review |
Articolo in rivista |
Go to |
| 2017 |
Enhancement of antibiotic productions by plasma modified PLA electrospun membranes in Streptomyces coelicolor immobilized-cell cultivations |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2017 |
Green Nanocomposites-Based on PLA and Natural Organic Fillers |
Capitolo o Saggio |
Go to |
| 2017 |
Bi-layer PCL/PLA scaffold prepared by melt for interface tissue engineering |
Abstract non pubblicato |
Go to |
| 2017 |
Plasma modified PLA electrospun membranes for actinorhodin production intensification in Streptomyces coelicolor immobilized-cell cultivations |
Articolo in rivista |
Go to |
| 2017 |
Mechanical properties of Macadamia nutshell powder and PLA bio-composites |
Articolo in rivista |
Go to |
| 2017 |
The small protein TrpM modulates morpho-physiological differentiation in Streptomyces coelicolor |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2017 |
IMPROVED PRODUCTION OF THE ANTIBIOTIC ACTINORHODIN IN STREPTOMYCES COELICOLOR IMMOBILIZED-MYCELIAL CELL CULTIVATIONS |
Poster pubblicato in volume |
Go to |
| 2017 |
A green method to prepare nanosilica modified graphene oxide to inhibit nanoparticles re-aggregation during melt processing |
Articolo in rivista |
Go to |
| 2017 |
BIODEGRADABLE BILAYER FILMS PREPARED BY CO-EXTRUSION |
Proceedings |
Go to |
| 2017 |
Biopolymeric porous structure for selective oil sorption and activity intensification of oil-degrading bacteria |
Abstract non pubblicato |
Go to |
| 2017 |
PLA/PCL nanofibrous blends via multi-jet electrospinning: processing-morphology-property relationships |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2017 |
Silica as a green exfoliant agent for graphene oxidepolymer nanocomposites prepared in the melt |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2017 |
Reprocessing of PLA based nanocomposites: Effect of nanofiller |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2017 |
Biopolymeric bilayer films for packaging applications prepared by co-extrusion film blowing |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2017 |
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships |
Articolo in rivista |
Go to |
| 2016 |
A rapid and eco-friendly route to synthesize graphene-doped silica nanohybrids |
Articolo in rivista |
Go to |
| 2016 |
Effect of Streptomyces coelicolor M145 cell immobilization on actinorhodin production |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2016 |
Effect of graphene nanoplatelets on the physical and antimicrobial properties of biopolymer-based nanocomposites |
Articolo in rivista |
Go to |
| 2016 |
Synthesis of a fluorinated graphene oxide-silica nanohybrid: Improving oxygen affinity |
Articolo in rivista |
Go to |
| 2016 |
Mechanical behavior of polylactic acid/polycaprolactone porous layered functional composites |
Articolo in rivista |
Go to |
| 2016 |
A simple method to interpret the rheological behaviour of intercalated polymer nanocomposites |
Articolo in rivista |
Go to |
| 2016 |
Synthesis and self-assembly of a PEGylated-graphene aerogel |
Articolo in rivista |
Go to |
| 2016 |
Preparation of three-layered porous PLA/PEG scaffold: Relationship between morphology, mechanical behavior and cell permeability |
Articolo in rivista |
Go to |
| 2016 |
Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering |
Articolo in rivista |
Go to |
| 2016 |
Melt Processed PCL/PEG Scaffold with Discrete Pore Size Gradient for Selective Cellular Infiltration |
Articolo in rivista |
Go to |
| 2016 |
Effect of PCL/PEG-Based Membranes on Actinorhodin Production in Streptomyces coelicolor Cultivations |
Articolo in rivista |
Go to |
| 2016 |
Incorporation of an antibiotic in poly(lactic acid) and polypropylene by melt processing |
Articolo in rivista |
Go to |
| 2016 |
A facile and eco-friendly route to fabricate poly(Lactic acid) scaffolds with graded pore size |
Articolo in rivista |
Go to |
| 2016 |
Progettazione efficiente di Biocompositi Rinforzati con fibre di Agave |
Proceedings |
Go to |
| 2016 |
Functional biopolymer-based nanocomposites incorporating graphene nanoplatelets |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2016 |
Biopolymer based nanocomposites reinforced with graphene nanoplatelets |
Proceedings |
Go to |
| 2016 |
Preparation and mechanical characterization of polycaprolactone/graphene oxide biocomposite nanofibers |
Proceedings |
Go to |
| 2016 |
Melt development of biphasic functionally graded scaffold |
Abstract in atti di convegno pubblicato in rivista |
Go to |
| 2016 |
Preparation and characterization of PCL/GO-g-PEG biocomposite nanofiber scaffolds |
Proceedings |
Go to |
| 2016 |
Synthesis of a biocompatible aerogel based on graphene oxide and a modified polyethylene glycol |
Proceedings |
Go to |
| 2016 |
Implication of the biofilm ageing for the settlement of the vermetid gastropod Dendropoma cristatum (Biondi 1857) |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2016 |
Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2016 |
Actinorhodin production intensification by nanofibrous membranes in Streptomyces coelicolor cultures |
Poster pubblicato in volume |
Go to |
| 2016 |
Improvement of actinorhodin production yield in Streptomyces coelicolor by immobilized-cell cultivations by using PCL- and PLA-based films |
Poster pubblicato in volume |
Go to |
| 2016 |
Oli essenziali: progressi scientifico-tecnologici per il controllo della crescita microbica |
Proceedings |
Go to |
| 2016 |
Three-layered porous device in PCL/PEG blend for interface tissue engineering |
Proceedings |
Go to |
| 2015 |
Bending test for capturing the vivid behavior of giant reeds, returned through a proper fractional visco-elastic model |
Articolo in rivista |
Go to |
| 2015 |
PEGylated graphene oxide (GO-PEG) as new carrier for chemotherapeutic agent delivery |
Proceedings |
Go to |
| 2015 |
Arundo Donax particles as reinforcement for PLA based composites |
Proceedings |
Go to |
| 2015 |
A novel approach to prevent graphene oxide re-aggregation during the melt compounding with polymers |
Articolo in rivista |
Go to |
| 2015 |
Processing and characterization of highly oriented fibres of biodegradable nanocomposites |
Articolo in rivista |
Go to |
| 2015 |
New polylactic acid composites reinforced with artichoke fibers |
Articolo in rivista |
Go to |
| 2015 |
A facile method to determine pore size distribution in porous scaffold by using image processing |
Articolo in rivista |
Go to |
| 2015 |
Bio-polymeric based sponges for oily waste recovery |
Proceedings |
Go to |
| 2015 |
Influence of Drawing on the Antimicrobial and Physical Properties of Chlorhexidine-Compounded Poly(caprolactone) Monofilaments |
Articolo in rivista |
Go to |
| 2015 |
Prediction of the morphology of polymer-clay nanocomposites |
Articolo in rivista |
Go to |
| 2015 |
Effect of temperature on the release of carvacrol and cinnamaldehyde incorporated into polymeric systems to control growth and biofilms of Escherichia coli and Staphylococcus aureus |
Articolo in rivista |
Go to |
| 2015 |
Synthesis and characterization of PEGylated graphene oxide for sorafenib modified release |
Proceedings |
Go to |
| 2015 |
A new scaffold-bacteria-based system for bioremediation of oil contaminated water |
Proceedings |
Go to |
| 2015 |
Processing-property relationships of polypropylene/ciprofloxacin fibers |
Proceedings |
Go to |
| 2015 |
Nuove prospettive di impiego degli oli essenziali incorporati in materiali polimerici: sviluppo di "packaging" antimicrobici |
Proceedings |
Go to |
| 2015 |
A model for the prediction of the flow curves from interlayer distance and vice versa for intercalated polymer and polymer blend nanocomposites |
Proceedings |
Go to |
| 2015 |
PCL/PEG based membranes for bacterial cells immobilization stimulate actinorhodin antibiotic production in S. coelicolor |
Abstract in atti di convegno pubblicato in volume |
Go to |
| 2015 |
A Novel Graphene Oxide-Silica Nanohybrid, Highly Functionalized by Organic Fluorotails |
Proceedings |
Go to |
| 2015 |
ANALISI DEL COMPORTAMENTO MECCANICO DI SANDWICH
ECO-COMPATIBILI RINFORZATI CON FIBRE NATURALI |
Proceedings |
Go to |
| 2014 |
Statistical study of the influence of CNTs purification and plasma functionalization on the properties of Polycarbonate-CNTs nanocomposites |
Articolo in rivista |
Go to |
| 2014 |
Degradation Behavior of Nanocomposite Polymer Blends |
Capitolo o Saggio |
Go to |
| 2014 |
CORRELATION BETWEEN THE CHEMICAL-PHYSICAL PROPERTIES OF CNT
AND MACROSCOPIC PROPERTIES OF RELATED NANOCOMPOSITES: A
STATISTICAL APPROACH |
Proceedings |
Go to |
| 2014 |
Potenziamento dell’attività antimicrobica di aldeide cinnamica e carvacrolo incorporati in film a base di etilen- vinil- acetato |
Proceedings |
Go to |
| 2014 |
Effetto della filatura di un sistema polimerico biodegradabile
nanocomposito |
Proceedings |
Go to |
| 2014 |
Pore size graded scaffold for selective cellular permeation |
Proceedings |
Go to |
| 2014 |
Graphene Oxide and Fumed Silica Graphene Oxide Nanocomposites Modification by Thermal Treatments |
Proceedings |
Go to |
| 2014 |
Biocompositi a base di PLA rinforzati con cariche lignocellulosiche ricavate dalla canna comune |
Proceedings |
Go to |
| 2014 |
Effetto della preparativa sulle proprietà di nanocompositi a base di ossido di grafene |
Proceedings |
Go to |
| 2014 |
PHOTO-OXIDATION OF PA6/GRAPHENE OXIDE FILMS |
Proceedings |
Go to |
| 2014 |
Scaffold con gradiente della dimensione dei pori per la migrazione selettiva di cellule eterotipiche |
Proceedings |
Go to |
| 2014 |
Antimicrobial thermoplastic materials for biomedical applications prepared by melt processing |
Proceedings |
Go to |
| 2014 |
Sustained release of carvacrol and cinnamaldehyde from polymeric films to control the monospecies and dual-species biofilm development by E. coli and S. aureus |
Proceedings |
Go to |
| 2014 |
Comparison of Different Processing Methods to Prepare Poly(lactid acid)–Hydrotalcite Composites |
Articolo in rivista |
Go to |
| 2014 |
Graphene oxide-silica nanohybrids as fillers for PA6 based nanocomposites |
Proceedings |
Go to |
| 2014 |
Nanofilled Thermoplastic-Thermoplastic Polymer Blends |
Capitolo o Saggio |
Go to |
| 2014 |
Recycling polymer blends |
Capitolo o Saggio |
Go to |
| 2014 |
Rapid and eco-friendly synthesis of graphene oxide-silica nanohybrids |
Proceedings |
Go to |
| 2014 |
IMPROVED STABILITY OF GRAPHENE OXIDE-SILICA NANOHYBRIDS AND
RELATED POLYMER-BASED NANOCOMPOSITES |
Proceedings |
Go to |
| 2014 |
Prediction of the flow curves of thermoplastic polymer/clay systems from torque data |
Articolo in rivista |
Go to |
| 2014 |
PLA based biocomposites reinforced with Arundo donax fillers |
Articolo in rivista |
Go to |
| 2013 |
Rheological and Mechanical Behavior of LDPE/Calcium Carbonate Nanocomposites and Microcomposites |
Articolo in rivista |
Go to |
| 2013 |
Processing – morphology – property relationships of polyamide 6/polyethylene blend–clay nanocomposites |
Articolo in rivista |
Go to |
| 2013 |
Melt-spun conductive fibers containing functionalized CNTs |
Proceedings |
Go to |
| 2013 |
Preparation and characterization of multilayer porous PLA scaffolds |
Proceedings |
Go to |
| 2013 |
Multifunctional fibers based on polyamide 6 and plasma functionalized carbon nanotubes. |
Proceedings |
Go to |
| 2013 |
Thermo-oxidative ageing of an organo-modified clay and effects on the properties of PA6 based nanocomposites |
Articolo in rivista |
Go to |
| 2013 |
Fibre antimicrobiche per applicazioni chirurgiche |
Articolo in rivista |
Go to |
| 2013 |
Statistical analysis of the performances of PC/CNTs nanocomposites |
Proceedings |
Go to |
| 2013 |
Polyamide 6/Graphene Oxide Nanohybrids |
Proceedings |
Go to |
| 2013 |
Statistical analysis of mechanical and dynamic-mechanical properties of PC/CNTs nanocomposites. |
Proceedings |
Go to |
| 2013 |
Effetto della temperatura sull’attività antimicrobica e antibiofilm di aldeide cinnamica e carvacrolo incorporati in film polimerici |
Proceedings |
Go to |
| 2013 |
Development and characterization of essential oil component-based polymer films: A potential approach to reduce bacterial biofilm |
Articolo in rivista |
Go to |
| 2013 |
Multilayer porous PLA scaffolds for tissue engineering applications |
Proceedings |
Go to |
| 2013 |
Biodegradation paths of Mater-Bi®/kenaf biodegradable composites |
Articolo in rivista |
Go to |
| 2013 |
Facile and novel synthesis of Graphene oxide/Silica nanohybrids with tunable properties |
Proceedings |
Go to |
| 2012 |
Effetto dello stiro sulle proprietà fisiche e antimicrobiche di fibre a base di PCL contenenti clorexidina |
Proceedings |
Go to |
| 2012 |
EFFETTO DI TIPOLOGIA E FUNZIONALIZZAZIONE DI NANOTUBI DI CARBONIO SULLE PROPRIETA’ DI FIBRE A MATRICE POLIAMMIDICA |
Proceedings |
Go to |
| 2012 |
Effect of cold drawing on the antimicrobial and physical properties of PCL/CHX monofilaments |
Proceedings |
Go to |
| 2012 |
High performance PA6/CNTs nanohybrid fibers prepared in the melt |
Articolo in rivista |
Go to |
| 2012 |
Uso di idrotalciti in compositi a matrice PLA preparati nel fuso |
Proceedings |
Go to |
| 2012 |
Photo-oxidative degradation of poly(ethylene-co-vinyl acetate)/nisin antimicrobial films |
Articolo in rivista |
Go to |
| 2012 |
Effect of small amounts of poly(lactic acid) on the recycling of poly(ethyleneterephtalate) bottles |
Articolo in rivista |
Go to |
| 2012 |
Presenza di PLA nel riciclo di PET |
Articolo in rivista |
Go to |
| 2012 |
Preparation and characterization of 3D PLA porous scaffolds |
Proceedings |
Go to |
| 2012 |
Comportamento di nanocompositi PA6/CNT in flusso elongazionale non isotermo |
Proceedings |
Go to |
| 2012 |
Comportamento reologico di nanocompositi a base di miscele HDPE/PA6 |
Proceedings |
Go to |
| 2012 |
Processing-morphology-properties relationships in HDPE/PA6/Clay nanocomposites |
Proceedings |
Go to |
| 2012 |
Combining in the melt physical and biological properties of poly(caprolactone) and chlorhexidine to obtain antimicrobial surgical monofilaments |
Articolo in rivista |
Go to |
| 2012 |
3D polylactide-based scaffolds for studying human hepatocarcinoma processes in vitro |
Articolo in rivista |
Go to |
| 2012 |
Plasma Functionalization of Multiwalled Carbon Nanotubes and Their Use in the Preparation of Nylon 6-Based Nanohybrids |
Articolo in rivista |
Go to |
| 2012 |
MULTIFUNCTIONAL FIBERS BASED ON POLYAMIDE 6 AND PLASMA FUNCTIONALIZED CARBON NANOTUBES MoDeSt 2012 Conference, Praga, 2-6 Settembre 2012. |
Proceedings |
Go to |
| 2012 |
Kenaf-filled biodegradable composites: rheological and mechanical behaviour |
Articolo in rivista |
Go to |
| 2012 |
Physical properties of virgin-recycled ABS blends: Effect of post-consumer content and of reprocessing cycles |
Articolo in rivista |
Go to |
| 2012 |
Effetto di differenti metodi di preparazione sulle proprietà morfologiche e fisiche di nanocompositi a base di miscele HDPE/PA6 |
Proceedings |
Go to |
| 2012 |
Processing and properties of biopolymer/polyhydroxyalkanoates blends |
Articolo in rivista |
Go to |
| 2012 |
Efficacia di film polimerici a base di etilen-vinil-acetato e componenti di oli essenziali nei confronti del biofilm |
Proceedings |
Go to |
| 2012 |
Enhancing the mechanical performance of polymer based
nanocomposites by plasma-modification of nanoparticles |
Articolo in rivista |
Go to |
| 2012 |
Study on carvacrol and cinnamaldehyde polymeric films: mechanical properties, release kinetics and antibacterial and antibiofilm activities |
Articolo in rivista |
Go to |
| 2012 |
Nuovi fili da sutura multifunzionali a rilascio controllato di sostanze antimicrobiche, antibiotiche, cicatrizzanti. |
Brevetto |
Go to |
| 2012 |
New phosphazene-based chain extenders containing allyl and epoxide groups |
Articolo in rivista |
Go to |
| 2012 |
On the use of hydrotalcite in PLA based composites |
Proceedings |
Go to |
| 2011 |
Realizzazione di nanocompositi a base di PA6 e CNT funzionalizzato al plasma |
Proceedings |
Go to |
| 2011 |
A new route for the preparation of flexible skin–core poly(ethylene-co-acrylic
acid)/polyaniline functional hybrids |
Articolo in rivista |
Go to |
| 2011 |
Ecocomposites obtained from MaterBi(R) and lignocellulosic fillers |
Proceedings |
Go to |
| 2011 |
Carbon nanotubes modification by plasma treatment |
Proceedings |
Go to |
| 2011 |
The role of aspect ration in the mechanical properties of lignocellulosic ecocomposites obtained from MaterBi(R) |
Proceedings |
Go to |
| 2011 |
Preparation and Characterization of PLA-Hydrotalcite Nanocomposites |
Proceedings |
Go to |
| 2011 |
Use of carbon nanotubes functionalized via plasma for the preparation of PA6-based nanohybrids |
Proceedings |
Go to |
| 2011 |
Surface Modification of Poly(ethylene-co-acrylic acid) with Amino-Functionalized Silica Nanoparticles |
Articolo in rivista |
Go to |
| 2011 |
The role of poly(ethylenglycol) molecular weight on viability and cell adhesion in polylactide based scaffolds |
Proceedings |
Go to |
| 2011 |
Effetto della presenza di piccoli quantitativi di PLA nel riciclo di contenitori in PET |
Proceedings |
Go to |
| 2011 |
Incorporation of nisin in poly (ethylene-co-vinyl acetate) films by melt processing: a study on the antimicrobial properties |
Articolo in rivista |
Go to |
| 2011 |
Plasma Modification of CNTs and Their Use in the Preparation of PA6/CNT Nanocomposites |
Proceedings |
Go to |
| 2011 |
Controllo del tenore superficiale di PEG per potenziare l'affinità cellulare di scaffold a matrice polilattidica |
Proceedings |
Go to |
| 2011 |
Synthesis and characterization of poly(L,L-lactide)-b-polyethylene glycol) diblock copolymers as plasticizers and their effect on the hydrophilicity of the polymer matrix to promote cellular affinity |
Proceedings |
Go to |
| 2011 |
Effect of surface PEG content on the viability and cell adhesion in PLA/PEG porous scaffolds |
Proceedings |
Go to |
| 2011 |
Plasma Modification of MWCNTs and Their Use in the Preparation of PA6/MWCNT Nanocomposites |
Proceedings |
Go to |
| 2011 |
Effetto dei metodi di lavorazione sulle proprietà di nanocompositi PLA/idrotalcite |
Proceedings |
Go to |
| 2011 |
Flexible nanoskin-core poly(ethylene-co-acrylic acid) polyaniline hybrids |
Proceedings |
Go to |
| 2011 |
Effect of kind and content of organo-modified clay on properties of PET nanocomposites |
Articolo in rivista |
Go to |
| 2011 |
Preparation and Recycling of Plasticized PLA |
Articolo in rivista |
Go to |
| 2011 |
Development and characterization of antimicrobial PCL fibres for surgical suture applications |
Proceedings |
Go to |
| 2011 |
PVC silver zeolite composites with antimicrobial properties |
Articolo in rivista |
Go to |
| 2011 |
Ibridi flessibili e conduttivi di poly(etilene-co-acido acrilico)/polianilina con struttura "nanoskin-core" |
Proceedings |
Go to |
| 2011 |
Polimeri antibatterici contenenti carvacrolo come approccio innovativo per il controllo del biofilm |
Proceedings |
Go to |
| 2011 |
Nanohybrid surface based on covalent linkage of amino-functionalized silica nanoparticles on EAA polymeric substrate |
Proceedings |
Go to |
| 2011 |
Performance of MaterBi(R) based ecocomposites |
Proceedings |
Go to |
| 2011 |
Micro-architecture of three-dimensional porous scaffolds evaluated via image processing technique |
Proceedings |
Go to |
| 2011 |
Preparazione e caratterizzazione di fibre a base di PCL con proprietà antimicrobiche per applicazioni chirurgiche |
Proceedings |
Go to |
| 2011 |
Compositi polimerici biodegradabili con fibre di kenaf |
Proceedings |
Go to |
| 2011 |
The effect of processing and molecular weight of poly(ethylenglycol) of polylactide-based scaffolds on viability and cell adhesion of SkHep1 cells |
Proceedings |
Go to |
| 2011 |
PLA-hydrotalcite nanocomposites: effect of processing methods |
Proceedings |
Go to |
| 2011 |
Viabilità e adesione cellulare di cellule di epatocarcinoma umano su supporti 3D a base di poli(acido D,L lattico) |
Proceedings |
Go to |
| 2011 |
Surface Modification of Poly(ethylene-co-acrylic acid) with Amino-Functionalized Silica Nanoparticles |
Proceedings |
Go to |
| 2011 |
Tissue Engineering Biopolymers |
Altro |
Go to |
| 2011 |
Antimicrobial properties and release profile of monofilaments incorporating chlorhexidine for surgical applications |
Proceedings |
Go to |
| 2011 |
Image processing techniques for the analysis of the micro-architecture of three-dimensional porous scaffolds |
Proceedings |
Go to |
| 2011 |
Poly(ethylenglycol) mimics adhesive capability of the ECM treatment on 3D polylactide-based scaffolds to study in vitro human hepatocarcinoma processes |
Proceedings |
Go to |
| 2011 |
Chemical design of flexible skin-core poly(ethylene-co-acrylic acid)/nanostructured polyaniline hybrids |
Proceedings |
Go to |
| 2011 |
Un nuovo strumento per misurare il comportamento al creep in condizioni reali di sistemi polimerici |
Proceedings |
Go to |
| 2010 |
Photo-oxidation Behaviour of EVA Antimicrobial Films |
Proceedings |
Go to |
| 2010 |
Modifica superficiale di film di polietilene–co–acido acrilico |
Proceedings |
Go to |
| 2010 |
GREEN COMPOSITES BASED ON BIODEGRADABLE POLYMERS AND WOOD FLOUR |
Capitolo o Saggio |
Go to |
| 2010 |
Effect of Different Matrices and Nanofillers on the Rheological Behavior of Polymer-Clay Nanocomposites |
Articolo in rivista |
Go to |
| 2010 |
Modification of carboxyl groups of poly(ethylene-co-acrylic acid) via facile wet chemistry method: A kinetic study |
Articolo in rivista |
Go to |
| 2010 |
MECHANICAL PROPERTIES AND BIODEGRADABILITY OF MATER-BI®/WOOD FLOUR ECOCOMPOSITES |
Proceedings |
Go to |
| 2010 |
A NEW ROUTE TO OBTAIN PANI-EAA FLEXIBLE FILMS |
Proceedings |
Go to |
| 2010 |
Influence of PLA on the recycling of PET bottles |
Proceedings |
Go to |
| 2010 |
UN NUOVO METODO PER OTTENERE FILM FLESSIBILI EAA-PANI |
Proceedings |
Go to |
| 2010 |
SCAFFOLDS POLILATTIDICI PER APPLICAZIONI BIOMEDICHE |
Proceedings |
Go to |
| 2010 |
EVA antimicrobial films prepared by melt processing |
Proceedings |
Go to |
| 2010 |
Influence of Nisin on Photo-stability of EVA Antimicrobial Films |
Proceedings |
Go to |
| 2010 |
Proprietà di film antimicrobici a base di EVA preparati tramite filmatura in bolla |
Proceedings |
Go to |
| 2010 |
Imballaggi antimicrobici estrusi |
Articolo in rivista |
Go to |
| 2010 |
Control of biofilm formation by poly-ethylene-co-vinyl acetate films incorporating nisin |
Articolo in rivista |
Go to |
| 2010 |
PREPARATION OF POROUS POLYLACTIDE MATERIALS FOR BIOMEDICAL APPLICATIONS |
Proceedings |
Go to |
| 2010 |
Reliability and Fabrication of Molds for Nanoimprinting |
Articolo in rivista |
Go to |
| 2010 |
A NEW ROUTE TO OBTAIN PANI-EAA FLEXIBLE FILMS |
Proceedings |
Go to |
| 2010 |
Preparation and characterization of polyamide 6/polyethylene blend-clay nanocomposites in the presence of compatibilisers and stabilizing system |
Articolo in rivista |
Go to |
| 2009 |
Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of stabilizers |
Articolo in rivista |
Go to |
| 2009 |
Chemical Reactions occurring in the molten state between Ny6 and Oxazoline groups linked to a Cyclophosphazene moiety |
Proceedings |
Go to |
| 2009 |
Modifica superficiale di film di poli(etilene-co-acido acrilico) con nanoparticelle di silice attivata |
Proceedings |
Go to |
| 2009 |
On the use of polyolefins based nanocomposites for film blowing applications |
Capitolo o Saggio |
Go to |
| 2009 |
Characterization of polyethylene/calcium carbonate nanocomposites |
Proceedings |
Go to |
| 2009 |
Relazione proprietà-morfologia-parametri di processo in materiali nanocompositi a matrice polimerica |
Proceedings |
Go to |
| 2009 |
Ecocompositi MaterBi (R)/Farina di legno: ottimizzazione delle proprietà attraverso analisi statistica |
Proceedings |
Go to |
| 2009 |
Controllo della crescita e formazione di biofilm su film polimerici contenenti nisina |
Proceedings |
Go to |
| 2009 |
Compositi di PVC-Ag con proprietà antimicrobiche |
Proceedings |
Go to |
| 2009 |
Effects of Organoclay on Morphology and Properties of Nanocomposites Based on LDPE/PA6 Blends without and with SEBS-g-MA |
Articolo in rivista |
Go to |
| 2009 |
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer |
Articolo in rivista |
Go to |
| 2009 |
Preparation and characterization of polyolefin- based nanocomposite blown films for agricultural applications |
Articolo in rivista |
Go to |
| 2009 |
ECOCOMPOSITI MATER-BI®/FARINA DI LEGNO: OTTIMIZZAZIONE DELLE PROPRIETA’ ATTRAVERSO ANALISI STATISTICA E BIODEGRADAZIONE |
Proceedings |
Go to |
| 2009 |
Preparazione e lavorabilità per estrusione e stampaggio ad iniezione di PLA |
Proceedings |
Go to |
| 2009 |
Preparazione e caratterizzazione di film a base di EVA con proprietà antimicrobiche |
Proceedings |
Go to |
| 2009 |
Antimicrobial activity of Ag based PVC composites |
Proceedings |
Go to |
| 2009 |
Film di EVA con attività antibatterica |
Proceedings |
Go to |
| 2009 |
Reactions occurring during the melt mixing of nylon 6 and oxazoline - Cyclophosphazene units |
Articolo in rivista |
Go to |
| 2009 |
Effect of the processing techniques on the properties of ecocomposites based on vegetable oil-derived Mater-Bi® and wood flour |
Articolo in rivista |
Go to |
| 2009 |
Antimicrobial activity of EVA blown films containing nisin |
Proceedings |
Go to |
| 2009 |
SURFACE MODIFICATION OF EAA WITH FUNCTIONALIZED SILICA NANOPARTICLES |
Proceedings |
Go to |
| 2009 |
A New Route to obtain PANI-EAA flexible films |
Proceedings |
Go to |
| 2009 |
MODIFICA SUPERFICIALE DI FILM DI POLY(ETILENE-co-ACIDO ACRILICO) CON NANOPARTICELLE DI SILICE ATTIVATA |
Proceedings |
Go to |
| 2009 |
Mechanism of formation of char coating in LDPE/organoclay nanocomposites |
Proceedings |
Go to |
| 2009 |
Degradation od Mater-Bi/wood flour biocomposites in active sewage sludge |
Articolo in rivista |
Go to |
| 2009 |
Caratterizzazione di nanocompositi polietilene/carbonato di calcio |
Proceedings |
Go to |
| 2009 |
Preparation and characterization of antimicrobial polymeric films based on poly(ethylene-co-vinyl acetate) |
Proceedings |
Go to |
| 2009 |
Polymer-based 'green' composites |
Proceedings |
Go to |
| 2009 |
Effect of heating of organo-montmorillonites under different atmospheres |
Articolo in rivista |
Go to |
| 2009 |
Characterization of annealed LDPE/clay nanocomposites |
Proceedings |
Go to |
| 2009 |
Chemical Reactions occurring in the molten state between Ny6 and Oxazoline groups linked to a Cyclophosphazene moiety |
Proceedings |
Go to |
| 2009 |
Clay nanocomposites based on compatibilized PA6/HDPE blends |
Proceedings |
Go to |
| 2009 |
Properties-morphology-processing relationships in polymer based clay nanocomposites |
Proceedings |
Go to |
| 2009 |
Control of biofilm formation by poly-ethylene-co-vinyl acetate films incorporating nisin |
Proceedings |
Go to |
| 2009 |
Biodegradable polymer-wood flour composites: main properties and biodegradability |
Proceedings |
Go to |
| 2008 |
Mechanical behaviour of Mater-Bi/wood flour composites: a statistical approach |
Articolo in rivista |
Go to |
| 2008 |
PREPARATION AND CHARACTERIZATION OF CLAY NANOCOMPOSITES BASED ON COMPATIBILIZED POLYAMMIDE6/POLYETHYLENE BLENDS |
Proceedings |
Go to |
| 2008 |
Preparazione e caratterizzazione di film poliolefinici nanocompositi per applicazioni in agricoltura |
Proceedings |
Go to |
| 2008 |
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier |
Articolo in rivista |
Go to |
| 2008 |
Surface Functionalization and Nanofiller Effect on Poymeric Nanocomposites |
Capitolo o Saggio |
Go to |
| 2008 |
Manufatti da polietilene e gomme di automobile post-consumo |
Capitolo o Saggio |
Go to |
| 2008 |
Relazioni proprietà-morfologia-lavorazione in materiali nanocompositi a matrice polimerica |
Proceedings |
Go to |
| 2008 |
Effect of adding wood flour to the physical properties of a biodegradable polymer |
Articolo in rivista |
Go to |
| 2008 |
Surface Treatment and nanofiller effect on the polymeric nanocomposites |
Capitolo o Saggio |
Go to |
| 2008 |
Nanocompositi a base di miscele compatibilizate PA6/PE: effetto della degradazione del modificante organico dell'argilla |
Proceedings |
Go to |
| 2008 |
Electrical Performance of Thin-Film Li-ion Batteries Under Uniform Pressure |
Articolo in rivista |
Go to |
| 2008 |
Influence Of Clay Thermal Degradation On Polyethylene Based Nanocomposite |
Proceedings |
Go to |
| 2008 |
Morphology and properties of polyethylene-clay nanocomposites drawn fibres |
Articolo in rivista |
Go to |
| 2008 |
Rheological Behaviour of polyolefin based nanocomposites in isothermal and non-isothermal elongational flow |
Proceedings |
Go to |
| 2008 |
Properties-morphology-processing relationships in polymer-based clay nanocomposites |
Proceedings |
Go to |
| 2008 |
A new equipment to measure the combined effect of humidity, temperature, mechanical stress and UV exposure on the creep behaviour of polymers |
Articolo in rivista |
Go to |
| 2008 |
Characterization and biodegradability of biodegradable polymer-wood flour composites |
Proceedings |
Go to |
| 2008 |
Effetto della degradazione di un'argilla organicamente modificata sulle proprietà di nanocompositi a base di miscele PA6/HDPE |
Proceedings |
Go to |
| 2008 |
Ag-composites with antimicrobial effects |
Proceedings |
Go to |
| 2008 |
CHARACTERIZATION AND PROCESSABILITY NOF POLYESTER BASED NANOCOMPOSITES |
Proceedings |
Go to |
| 2008 |
Influenza delle lavorazioni sulle proprietà di compositi a base di polimeri biodegradabili e farina di legno |
Proceedings |
Go to |
| 2008 |
CARATTERIZZAZIONE E LAVORABILITA DI NANOCOMPOSITI A MATRICE POLIESTERE |
Proceedings |
Go to |
| 2008 |
Caratterizzazione e lavorabilità di nanocompositi a matrice poliestere |
Proceedings |
Go to |
| 2008 |
Processability and biodegradation of wood/biopolymer composites |
Proceedings |
Go to |
| 2008 |
Performance of thin-film lithium energy cells under uniaxial pressure |
Articolo in rivista |
Go to |
| 2008 |
Effect of the processing on the properties of biopolymer based composites filled with wood flour |
Articolo in rivista |
Go to |
| 2007 |
Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends |
Articolo in rivista |
Go to |
| 2007 |
MECHANICAL PROPERTIES OF WOOD FLOUR FILLED BIOCOMPOSITES: A STATISTICAL APPROACH |
Altro |
Go to |
| 2007 |
Role of oxyegen on rheological response of polyethylene–clay nanocomposites to annealing |
Proceedings |
Go to |
| 2007 |
Reactivity of cyclophosphazenes with end functionalised Ny6 samples and EAA copolyme |
Proceedings |
Go to |
| 2007 |
Characterization of green composites from biodegradable polymers and wood flour. |
Proceedings |
Go to |
| 2007 |
CuO nanoparticle filled vinyl-ester resin nanocomposites: Fabrication, characterization and property analysis |
Articolo in rivista |
Go to |
| 2007 |
Utilisation of polyhydroxyalkanoates for biodegradable polymer blends: properties and application |
Proceedings |
Go to |
| 2007 |
Characterization of biobased composites filled with wood flour |
Proceedings |
Go to |
| 2007 |
Effect of the adding of a functionalized nanoclay in polyethylene/polyamide blends |
Proceedings |
Go to |
| 2007 |
Apparecchiatura per la misura della deformazione sotto carico |
Brevetto |
Go to |
| 2007 |
Impiego di poliidrossialcanoati in miscele polimeriche: properietà ed applicazioni |
Proceedings |
Go to |
| 2007 |
Particle surface engineering effect on the mechanical, optical and photoluminescent properties of ZnO/vinyl-ester resin nanocomposites |
Articolo in rivista |
Go to |
| 2007 |
Composites from biodegradable polymers and wood flour |
Proceedings |
Go to |
| 2007 |
Polyethylene–clay nanocomposite: Effect of annealing under different atmospheres |
Proceedings |
Go to |
| 2007 |
Effect of annealing under different atmospheres on polyethylene-clay nanocomposites |
Proceedings |
Go to |
| 2007 |
Photovoltaic performance of amorphous silicon flexible solar modules under mechanical loading |
Proceedings |
Go to |
| 2007 |
Role of oxygen on rheological response of polyethylene–clay nanocomposites to annealing |
Proceedings |
Go to |
| 2007 |
Effect of adding an organically modified clay to a polyethylene/polyamide blend in the presence of compatibilizing agents |
Proceedings |
Go to |
| 2007 |
Effect Of Adding An Organically Modified Clay To A Polyamide/Polyethylene Blend In The Presence Of Compatibilizing Agents |
Proceedings |
Go to |
| 2007 |
Mechanical and rheological analyses of recycled polyethylene and ground tyre rubber |
Proceedings |
Go to |
| 2007 |
CHARACTERIZATION OF BIOPOLYMER BASED COMPOSITES FILLED WITH WOOD FLOUR. |
Proceedings |
Go to |
| 2007 |
Degradazione Di Argille Modificate Organicamente |
Proceedings |
Go to |
| 2007 |
Morphology and properties of LDPE/PA-6 blends compatibilized with SEBS-g-MA and/or organoclay |
Proceedings |
Go to |
| 2007 |
Optimisation of the processing conditions in the recycling of polycondensation polymers |
Articolo in rivista |
Go to |
| 2007 |
Compatibilization of polymer blends by using a cyclophosphazene additive |
Proceedings |
Go to |
| 2007 |
Effect of annealing under different atmospheres on polyethylene-clay nanocomposite |
Proceedings |
Go to |
| 2007 |
Rheological Response of Polyethylene/Clay Nanocomposites to Annealing Treatment |
Articolo in rivista |
Go to |
| 2006 |
Evolution of the Morphology and Characterization of Compatibilized PBT/EVA Blends Prepared by Reactive Extrusion |
Articolo in rivista |
Go to |
| 2006 |
Morphology of Polyamide/Polyethylene Blends in Presence of Nanoclay |
Proceedings |
Go to |
| 2006 |
Preparazione e caratterizazione di polimeri biodegradabili caricati con riempitivi organico-naturali |
Proceedings |
Go to |
| 2006 |
Nanoimprinting Reliability |
Proceedings |
Go to |
| 2006 |
Annealing time dependent rheological properties of polyethylene based nanocomposites |
Proceedings |
Go to |
| 2006 |
Electrochemical Nanolithography (ENL) |
Proceedings |
Go to |
| 2006 |
An Investigation of Polymeric Nanocomposite: Surface Functionalization and Nanofiller Effect |
Proceedings |
Go to |
| 2006 |
Evolution of the morphology and characterzation of compatibilized PBT/EVA blends prepared by reactive extrusion |
Articolo in rivista |
Go to |
| 2006 |
Evolution of the Morphology and Characterization of Compatibilized PBT/EVA Blends Prepared by Reactive Extrusion |
Proceedings |
Go to |
| 2006 |
Processing and Characterization of Zinc Oxide Nanoparticle Filled Polymeric Nanocomposites |
Articolo in rivista |
Go to |
| 2006 |
On the Preparation and the Characterization of Polyethylene/Polyamide Blends by Melt Processing in the Presence of an Ethylene(co)acrylic Acid Copolymer and of New Phosphazene Compounds |
Articolo in rivista |
Go to |
| 2006 |
Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples |
Articolo in rivista |
Go to |
| 2006 |
Modification of viscoelastic properties of polyethylene based nanocomposites after thermal treatment |
Proceedings |
Go to |
| 2006 |
Green Composites of Biodegradable Polymers and Natural Organic Fillers |
Proceedings |
Go to |
| 2006 |
Effect of adding new phosphazene compounds in polybutyleneterephthalate/polyamide blends. II: Effect of difefrent polyamides on the properties of extruded samples |
Articolo in rivista |
Go to |
| 2006 |
Thermal treatment dependent rheological properties of polyethylene based nanocomposites |
Proceedings |
Go to |
| 2006 |
On the effectiveness of different additives and concentrations on the re-building of the molecular structure of degraded polyethylene |
Articolo in rivista |
Go to |
| 2006 |
The Performance of Thin-Film Li-ion Batteries Under Flexural Deflection |
Articolo in rivista |
Go to |
| 2006 |
Electrical Performance of Thin-Film Li-ion Batteries Under Flexural Deflection |
Proceedings |
Go to |
| 2006 |
Preparazione e caratterizzazione di polimeri biodegradabili caricati con riempitivi naturali |
Proceedings |
Go to |
| 2006 |
Preparazione e caratterizzazione di polimeri biodegradabili caricati con riempitivi organico-naturali |
Proceedings |
Go to |
| 2006 |
Effect of thermal treatment time on the rheological behaviour of PE based nanocomposites |
Proceedings |
Go to |
| 2006 |
Preparazione e caratterizzazione di polimeri biodegradabili coricati con riempitivi organico-naturali |
Proceedings |
Go to |
| 2006 |
Proprietà meccaniche di miscele poliammide/poliolefine in presenza di ciclofosfazeni |
Proceedings |
Go to |
| 2006 |
Nanoimprinting Reliability |
Proceedings |
Go to |
| 2006 |
Synthesis and Characterization of a New Fully Aromatic LCP |
Articolo in rivista |
Go to |
| 2005 |
Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber: Mechanical and rheological analysis |
Articolo in rivista |
Go to |
| 2005 |
Effect of adding new phosphazene compounds in polybutylenetherephtalate/polyamide blends |
Proceedings |
Go to |
| 2005 |
Formulation, Characterization and Optimization of the Processing Conditions of Blends of Recycled Polyethylene and Ground Tyre Rubbers: Mechanical and Rheological Analysis |
Articolo in rivista |
Go to |
| 2005 |
Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow |
Articolo in rivista |
Go to |
| 2005 |
Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. I: Preliminary study in a batch mixer |
Articolo in rivista |
Go to |
| 2005 |
Effetto della Polarità dei Componenti sulle Proprietà di Nanocompositi |
Proceedings |
Go to |
| 2005 |
Film Nanocompositi Polimerici |
Proceedings |
Go to |
| 2005 |
Effect of thermal cycles on the rheological behaviour of polymerclay nanocomposites |
Proceedings |
Go to |
| 2004 |
Reactive compatibilization of PBT/EVA blends with an ethylene-acrylic acid copolymer and a low molecular mass bis-oxazoline |
Articolo in rivista |
Go to |
| 2004 |
Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow |
Proceedings |
Go to |
| 2004 |
Compatibilization of PBT/EVA blends |
Proceedings |
Go to |
| 2004 |
Reactive Compatibilization of PBT/EVA Blends with an Ethylene‐Acrylic Acid Copolymer and a Low Molar Mass Bis‐Oxazoline |
Proceedings |
Go to |
| 2004 |
Recycling of RPE/ Ground Tire Rubber Blends: Properties and Applications |
Proceedings |
Go to |
| 2004 |
Cyclophosphazenes as versatile substrates in polymer chemistry |
Articolo in rivista |
Go to |
| 2004 |
Effects Of Adding New Low Molecular Weight Phosphazene Compounds To PBT/Ny Blends |
Proceedings |
Go to |
| 2004 |
Regradation of Photooxidized Post-Consumer Greenhouse Films |
Proceedings |
Go to |
| 2003 |
Morphology and mechanical properties of extruded ribbons of LDPE/PA6 blends compatibilized with an ethylene-acrylic acid copolymer |
Articolo in rivista |
Go to |
| 2003 |
Cyclophosphazenes as polymer modifiers |
Articolo in rivista |
Go to |
| 2003 |
Reactive compatibilization of PA6/LDPE blends with an ethylene–acrylic acid copolymer and a low molar mass bis-oxazoline |
Articolo in rivista |
Go to |
| 2002 |
Recycling of a starch-based biodegradable polymer |
Articolo in rivista |
Go to |
| 2002 |
Characterization of monopolymer blend of virgin and recycled polyamide 6 |
Articolo in rivista |
Go to |
| 2002 |
Oxazoline-containing compatibilizers for polyamide/SAN and polyamide/ABS blends |
Articolo in rivista |
Go to |
| 2002 |
Recycling of dry and wet polyamide 6 |
Articolo in rivista |
Go to |
| 2002 |
Reprocessing and restabilization of greenhouse films |
Articolo in rivista |
Go to |
| 2002 |
Melt stabilization of wet polyamide 6 |
Articolo in rivista |
Go to |
| 2001 |
Modification of EVOH copolymers with e-caprolactone: synthesis and compatibilization effects in PE/PVC blends |
Articolo in rivista |
Go to |
| 2001 |
Oxazoline functionalization of polyethylenes and their blends with polyamides and polyesters |
Articolo in rivista |
Go to |
| 2000 |
On the modification of the nitrile groups of acrylonitrile/butadiene/styrene into oxazoline in the melt |
Articolo in rivista |
Go to |
| 2000 |
On the mechanism of compatibilization of polyolefin/liquid crystalline polymer blends with graft copolymers |
Articolo in rivista |
Go to |
| 1999 |
Effect of the components' molar mass and of the mixing conditions on the compatibilization of PE-LCP blends by PE-g-LCP copolymers |
Articolo in rivista |
Go to |
| 1999 |
Effect of the Orientation on the Properties of Compatibilized Polypropylene/Liquid Crystal Polymer Blends |
Articolo in rivista |
Go to |
| 1999 |
Use of PP-g-OXA in the compatibilization of PP/LCP blends |
Articolo in rivista |
Go to |
| 1998 |
Chemical Modification of Nitrile to Oxazoline Functionality on a Styrene-Acrylonitrile Copolymer in the Melt |
Articolo in rivista |
Go to |
| 1998 |
Characterization of a fiber-reinforced new fully aromatic liquid crystalline polymer |
Articolo in rivista |
Go to |
| 1997 |
Reprocessing of polyethyleneterephthalate and characterisation of monopolymer blends of virgin and recycled polymers |
Articolo in rivista |
Go to |
| 1997 |
Characterization of a fiber reinforced semirigid liquid crystalline polymer |
Articolo in rivista |
Go to |
| 1996 |
Effects of filler type and mixing method on the physical properties of a reinforced semirigid liquid crystal polymer |
Articolo in rivista |
Go to |
| 1996 |
On the use of PET-LCP copolymers as compatibilizers for PET/LCP blends |
Articolo in rivista |
Go to |
| 1996 |
Processing and characterization of blends of fluoroelastomers with semirigid liquid crystal polymers |
Articolo in rivista |
Go to |
| 1996 |
Reactive blending of a functionalized polyethylene with a semiflexible liquid crystalline copolyester |
Articolo in rivista |
Go to |
| 1996 |
An investigation of the compatibilization of blends of polyethylene and a semirigid liquid crystalline polymer |
Articolo in rivista |
Go to |
| 1996 |
Compatibilization of blends of polyethylene with a semirigid liquid crystalline polymer by PE-g-LCP copolymers |
Articolo in rivista |
Go to |
