2024 |
A New Automatic Process Based on Generative Design for CAD Modeling and Manufacturing of Customized Orthosis |
Articolo in rivista |
Go to |
2024 |
Study of Stress Distribution in Press-Fit Transfemoral Implants: Standard Versus Patient-Specific Design |
Contributo in atti di convegno pubblicato in volume |
Go to |
2024 |
A New Tool for Preoperative Planning of Reverse Total Shoulder Arthroplasty |
Contributo in atti di convegno pubblicato in volume |
Go to |
2023 |
Study of a constrained finite element elbow prosthesis: the influence of the implant placement |
Articolo in rivista |
Go to |
2023 |
Numerical Optimization of a Composite Sandwich Panel with a Novel Bi-directional Corrugated Core Using an Animal-Inspired Optimization Algorithm |
Capitolo o Saggio |
Go to |
2023 |
Reverse Engineering and Redesign of the Impeller of a Submersible Centrifugal Pump |
Capitolo o Saggio |
Go to |
2023 |
A Topology Optimization Approach to Design of a Low Cost 3D Printable Monolithic Compliant Mechanism for FWMAV’s Wing Actuation |
Contributo in atti di convegno pubblicato in volume |
Go to |
2022 |
A New Approach for CAD Modelling of Customised Orthoses by Generative Design |
Capitolo o Saggio |
Go to |
2021 |
On the left ventricular remodeling of patients with stenotic aortic valve: A statistical shape analysis |
Articolo in rivista |
Go to |
2021 |
Parametric Hull Design with Rational Bézier Curves and Estimation of Performances |
Articolo in rivista |
Go to |
2021 |
Numerical simulations on periprosthetic bone remodeling: a systematic review |
Articolo in rivista |
Go to |
2021 |
Generative Design for Additively Manufactured Textiles in Orthopaedic Applications |
Capitolo o Saggio |
Go to |
2021 |
Improving the Downwind Sail Design Process by Means of a Novel FSI Approach |
Articolo in rivista |
Go to |
2020 |
A New Approach to Evaluate the Biomechanical Characteristics of Osseointegrated Dental Implants |
Capitolo o Saggio |
Go to |
2020 |
Additively manufactured textiles and parametric modelling by generative algorithms in orthopaedic applications |
Articolo in rivista |
Go to |
2020 |
CAD Modeling for Evaluating LVOT Obstruction in Transcatheter Mitral Valve Replacement |
Contributo in atti di convegno pubblicato in volume |
Go to |
2020 |
Biomechanical analysis of two types of osseointegrated transfemoral prosthesis |
Articolo in rivista |
Go to |
2020 |
A new design approach for customised medical devices realized by additive manufacturing |
Articolo in rivista |
Go to |
2020 |
Influence of the Screw Positioning on the Stability of Locking Plate for Proximal Tibial Fractures: A Numerical Approach |
Articolo in rivista |
Go to |
2020 |
Industry 4.0: smart test bench for shipbuilding industry |
Articolo in rivista |
Go to |
2019 |
Fluid-structure interaction of downwind sails: a new computational method |
Articolo in rivista |
Go to |
2019 |
A new method to evaluate the influence of the glenosphere positioning on stability and range of motion of a reverse shoulder prosthesis |
Articolo in rivista |
Go to |
2019 |
Head Injury Criterion: mini review |
Articolo in rivista |
Go to |
2019 |
New customized elbow orthosis made by additive manufacturing |
Capitolo o Saggio |
Go to |
2019 |
Yacht performance monitoring in real sailing conditions |
Articolo in rivista |
Go to |
2019 |
Influence of sutures configuration on the strength of tendon-patch joints for rotator cuff tears treatment |
Articolo in rivista |
Go to |
2018 |
Biomechanical analysis of the humeral tray positioning in reverse shoulder arthroplasty design |
Articolo in rivista |
Go to |
2018 |
Virtual simulation of an osseointegrated trans-humeral prosthesis: A falling scenario |
Articolo in rivista |
Go to |
2018 |
Numerical prediction of ventilated planing flat plates for the design of Air Cavity Ships |
Articolo in rivista |
Go to |
2018 |
Shape optimization of high-energy absorbers |
Articolo in rivista |
Go to |
2018 |
FEM and experimental analysis of a total knee prosthesis |
Articolo in rivista |
Go to |
2018 |
Study of the performances of a fluidynamic actuator |
Articolo in rivista |
Go to |
2018 |
New algorithms to evaluate the real shape of a hull |
Articolo in rivista |
Go to |
2017 |
A multi-technique simultaneous approach for the design of a sailing yacht |
Articolo in rivista |
Go to |
2017 |
B-Scan image analysis for position and shape defect definition in plates |
Capitolo o Saggio |
Go to |
2017 |
A preliminary method for the numerical prediction of the behavior of air bubbles in the design of air cavity ships |
Capitolo o Saggio |
Go to |
2017 |
Process parameters influence in additive manufacturing |
Capitolo o Saggio |
Go to |
2017 |
Influence of the metaphysis positioning in a new reverse shoulder prosthesis |
Capitolo o Saggio |
Go to |
2016 |
Determination of Torsional Stresses in Shafts: From Physical Analogies to Mathematical Models |
Capitolo o Saggio |
Go to |
2015 |
Thermal stress analysis of different full and ventilated disc brakes |
Articolo in rivista |
Go to |
2014 |
A new methodology for the optimal design of crash-boxes |
Proceedings |
Go to |
2014 |
A new ESO-based method to find the optimal topology of structures subject to multiple load conditions |
Capitolo o Saggio |
Go to |
2014 |
Optimal positioning of the humeral component in the reverse shoulder prosthesis |
Articolo in rivista |
Go to |
2014 |
Numerical study of the components positioning influence on the stability of a reverse shoulder prosthesis |
Articolo in rivista |
Go to |
2014 |
Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation |
Articolo in rivista |
Go to |
2014 |
On the history of torsional stress concentrations in shafts: From electrical analogies to numerical methods |
Articolo in rivista |
Go to |
2014 |
Redesign of a reverse shoulder prosthesis: Kinematic and mechanical study |
Capitolo o Saggio |
Go to |
2013 |
A new methodology to evaluate the flying shape of a sail |
Proceedings |
Go to |
2013 |
Behaviour of a speargun with a novel muzzle |
Articolo in rivista |
Go to |
2013 |
TORSIONAL STRESS CONCENTRATIONS IN SHAFTS:
FROM ELECTRICAL ANALOGIES TO NUMERICAL METHODS |
Proceedings |
Go to |
2013 |
A comparison of simplex and simulated annealing for optimization of a new rear underrun protective device |
Articolo in rivista |
Go to |
2012 |
Numerical study of the components positioning
influence on the stability of a reverse shoulder prosthesis |
Proceedings |
Go to |
2012 |
Real-time non-contact ultrasonic detection
of surface defects on objects moving at high speed |
Articolo in rivista |
Go to |
2012 |
Finite element analysis of two total knee joint prostheses |
Articolo in rivista |
Go to |
2011 |
NUMERICAL FATIGUE LIFE EVALUATION OF AN INNOVATIVE INTERNAL COMBUSTION ENGINE SHAFT |
Proceedings |
Go to |
2011 |
STRUCTURAL ANALYSIS OF A POSTERIOR STABILITY TOTAL KNEE JOINT REPLACEMENT |
Proceedings |
Go to |
2011 |
REDESIGN OF AN AUTO-LEVELLING BASE FOR SUBMARINE SEISMIC SENSOR |
Proceedings |
Go to |
2010 |
DESIGN OPTIMIZATION AND ANALYSIS OF A NEW REAR UNDERRUN PROTECTIVE DEVICE FOR TRUCK |
Proceedings |
Go to |
2010 |
PROPAGAZIONE DI ONDE GUIDATE IN LAMINATI MULTISTRATO INCOLLATI: ANALISI NUMERICA E SPERIMENTALE |
Proceedings |
Go to |
2009 |
Evaluation of Clutch Plate Integrity with Non-Destructive Methods |
Proceedings |
Go to |
2009 |
TOPOLOGY OPTIMIZATION OF A CONNECTING ROD FOR AN INTERNAL COMBUSTION ENGINE |
Proceedings |
Go to |
2009 |
Integrated Computer-Aided Innovation: The PROSIT approach |
Articolo in rivista |
Go to |
2008 |
A new haptic-based tool for training in medicine. |
Proceedings |
Go to |
2008 |
A virtual concept of city car |
Proceedings |
Go to |
2008 |
OTTIMIZZAZIONE TOPOLOGICA DI BIELLA PER MOTORE A COMBUSTIONE INTERNA |
Proceedings |
Go to |
2008 |
Detection of disbonds in multilayer structures by laser-based ultrasonic technique |
Articolo in rivista |
Go to |
2008 |
Surface Measurement by Digital Image Correlation Technique |
Articolo in rivista |
Go to |
2008 |
Kansei Engineering and Virtual Reality in Conceptual Design |
Proceedings |
Go to |
2008 |
Design of a new high energy rear underrun protective device |
Capitolo o Saggio |
Go to |
2008 |
Finite-element simulation of residual stress induced by split-sleeve cold-expansion process of holes |
Articolo in rivista |
Go to |
2007 |
Surface Measurement by Digital Image Correlation Technique |
Proceedings |
Go to |
2007 |
Dynamic Rail Inspection by Vision System |
Proceedings |
Go to |
2007 |
Friction Stir Welding Inspection by Non-Contact Ultrasonic Technique |
Proceedings |
Go to |
2007 |
Conceptual Design by Triz: an Application to a Rear Underrun Protective Device for Industrial Vehicle |
Proceedings |
Go to |
2007 |
Progettazione concettuale di dispositivo paraincastro posteriore per veicoli industriali |
Proceedings |
Go to |
2007 |
A new design approach to the use of composite materials for heavy transport vehicles |
Articolo in rivista |
Go to |
2007 |
Misura della riduzione di spessore per corrosione in lamiere di alluminio mediante tecnica laser |
Proceedings |
Go to |
2007 |
Adhesively bonded joints: evaluation of integrity |
Proceedings |
Go to |
2006 |
Defect characterization in Al welded joints by non-contact Lamb wave technique |
Articolo in rivista |
Go to |
2006 |
Aumentare la sicurezza passiva |
Articolo in rivista |
Go to |
2006 |
Un metodo per l’analisi delle tensioni residue nei fori espansi a freddo |
Proceedings |
Go to |
2006 |
Previsione numerica delle tensioni residue indotte in fori espansi a freddo |
Proceedings |
Go to |
2006 |
BRAKING PROCEDURE ANALYSIS OF A PEGS-WIN VENTILATED DISK BRAKE ROTOR |
Articolo in rivista |
Go to |
2006 |
A NON-CONTACT ULTRASONIC SYSTEM FOR IN-FIELD RAIL TRACK INSPECTION |
Proceedings |
Go to |
2006 |
A Non-Contact Automated Vision and Positioning System for In-Field Rail NDE |
Proceedings |
Go to |
2006 |
Quantitative Evaluation of Defects in Adhesive-Bonded Joints by Non-contact Ultrasonic Techniques |
Proceedings |
Go to |
2005 |
DISPOSITIVO PARAINCASTRO POSTERIORE AD ELEVATO ASSORBIMENTO ENERGETICO |
Proceedings |
Go to |
2005 |
Methodical redesign of a semitrailer |
Capitolo o Saggio |
Go to |
2005 |
NUMERICAL AND EXPERIMENTAL ANALYSIS OF A PEGS-WING VENTILATED DISK BRAKE ROTOR, WITH PADS AND CYLINDERS |
Proceedings |
Go to |
2005 |
Finite element reanalysis in virtual reality environments |
Capitolo o Saggio |
Go to |
2005 |
Un nuovo strumento per lo studio dei risultati di analisi FEM |
Capitolo o Saggio |
Go to |
2005 |
A NEO APPLICATION OF REVERSE ENGINEERING BASED ON THE PROJECTION MOIRé TECHNIQUE |
Proceedings |
Go to |
2005 |
Integrazione di Tecnologie CAE in Ambienti VR |
Capitolo o Saggio |
Go to |
2004 |
DATA FITTING WITH NURBS SURFACES BY A REAL-CODED GENETIC ALGORITHM |
Proceedings |
Go to |
2004 |
Improvements of Fatigue Life in Drilling Structures by Both Cold Expansion and Indentation |
Proceedings |
Go to |
2004 |
3D DATA ACQUISITION AND NUMERICAL ANALYSIS OF A FOOTWEAR IN WALKING |
Proceedings |
Go to |
2004 |
L’implementazione del processo di redesign |
Capitolo o Saggio |
Go to |
2004 |
Simulation of the Behaviour of a New Semitrailer with Structural Load-Carrying Platform in Composite Material |
Capitolo o Saggio |
Go to |
2003 |
Approccio Metodico alla Riprogettazione di un Semirimorchio |
Proceedings |
Go to |
2001 |
Quantitative subsurface defect detection in composite materials using a non-contact ultrasonic system |
Proceedings |
Go to |