Skip to main content
Passa alla visualizzazione normale.


Pari opportunità

VINCENZO LA CARRUBBA

Publications

Date Title Type Record
2024 The Phenotype of Mesenchymal Stromal Cell and Articular Chondrocyte Cocultures on Highly Porous Bilayer Poly-L-Lactic Acid Scaffolds Produced by Thermally Induced Phase Separation and Supplemented with Hydroxyapatite Articolo in rivista Go to
2024 Three-dimensional (3D) polylactic acid gradient scaffold to study the behavior of osteosarcoma cells under dynamic conditions Articolo in rivista Go to
2024 Improvement of Osteogenic Differentiation of Mouse Pre-Osteoblastic MC3T3-E1 Cells on Core–Shell Polylactic Acid/Chitosan Electrospun Scaffolds for Bone Defect Repair Articolo in rivista Go to
2023 Computational modeling and experimental characterization of fluid dynamics in micro-CT scanned scaffolds within a multiple-sample airlift perfusion bioreactor Articolo in rivista Go to
2023 Galvanic Deposition of Calcium Phosphate/Bioglass Composite Coating on AISI 316L Articolo in rivista Go to
2022 A dynamic air–liquid interface system for in vitro mimicking of the nasal mucosa Articolo in rivista Go to
2022 Mathematical and numerical modeling of an airlift perfusion bioreactor for tissue engineering applications Articolo in rivista Go to
2022 Composite Coatings of Chitosan and Silver Nanoparticles Obtained by Galvanic Deposition for Orthopedic Implants Articolo in rivista Go to
2022 Poly-L-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications Review essay (rassegna critica) Go to
2022 Physical and antibacterial properties of PLA electrospun mats loaded with carvacrol and nisin Articolo in rivista Go to
2022 Behavior of Calcium Phosphate-Chitosan-Collagen Composite Coating on AISI 304 for Orthopedic Applications Articolo in rivista Go to
2022 Integrated production of biopolymers with industrial wastewater treatment: Effects of OLR on process yields, biopolymers characteristics and mixed microbial community enrichment Articolo in rivista Go to
2022 Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat Articolo in rivista Go to
2022 Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally Induced Phase Separation (TIPS) Articolo in rivista Go to
2022 Occurrence of Microplastics in Waste Sludge of Wastewater Treatment Plants: Comparison between Membrane Bioreactor (MBR) and Conventional Activated Sludge (CAS) Technologies Articolo in rivista Go to
2021 Galvanic Deposition of Hydroxyapatite/Chitosan/Collagen Coatings on 304 Stainless Steel Contributo in atti di convegno pubblicato in volume Go to
2021 Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications Articolo in rivista Go to
2021 Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering Articolo in rivista Go to
2021 Galvanic deposition of Hydroxyapatite/Chitosan/Collagen coatings on 304 stainless steel Articolo in rivista Go to
2021 A High-Throughput Mechanical Activator for Cartilage Engineering Enables Rapid Screening of in vitro Response of Tissue Models to Physiological and Supra-Physiological Loads Articolo in rivista Go to
2021 Solution-based processing for scaffold fabrication in tissue engineering applications: A brief review Review essay (rassegna critica) Go to
2021 Novel dual-flow perfusion bioreactor for in vitro pre-screening of nanoparticles delivery: design, characterization and testing Articolo in rivista Go to
2021 Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes Articolo in rivista Go to
2021 Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications Articolo in rivista Go to
2021 Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized via air-plasma treatment Articolo in rivista Go to
2020 Improvement of osteogenic differentiation of human mesenchymal stem cells on composite poly l-lactic acid/nano-hydroxyapatite scaffolds for bone defect repair Articolo in rivista Go to
2020 Development of injectable and durable kefiran hydro-alcoholic gels Articolo in rivista Go to
2020 Polylactic is a Sustainable, Low Absorption, Low Autofluorescence Alternative to Other Plastics for Microfluidic and Organ-on-Chip Applications Articolo in rivista Go to
2020 3D polymeric supports promote the growth and progression of anaplastic thyroid carcinoma Articolo in rivista Go to
2020 Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous mats Articolo in rivista Go to
2019 Chitosan-Coating Deposition via Galvanic Coupling Articolo in rivista Go to
2019 Human nasoseptal chondrocytes maintain their differentiated phenotype on PLLA scaffolds produced by thermally induced phase separation and supplemented with bioactive glass 1393 Articolo in rivista Go to
2019 Polylactide-based materials science strategies to improve tissue-material interface without the use of growth factors or other biological molecules Articolo in rivista Go to
2019 Establishment of a pulmonary epithelial barrier on biodegradable poly-L-lactic-acid membranes Articolo in rivista Go to
2019 Valorisation of Dairy Wastes Through Kefir Grain Production Articolo in rivista Go to
2019 Porous biomaterials and scaffolds for tissue engineering Capitolo o Saggio Go to
2019 PLLA scaffolds with controlled architecture as potential microenvironment for in vitro tumor model Articolo in rivista Go to
2019 Blend scaffolds with polyaspartamide/polyester structure fabricated via TIPS and their RGDC functionalization to promote osteoblast adhesion and proliferation Articolo in rivista Go to
2019 Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices Contributo in atti di convegno pubblicato in volume Go to
2019 PREPARATION AND CHARACTERIZATION OF POLYLACTIC ACID/SILICA AND POLYLACTIC ACID/CLAYS BIONANOCOMPOSITE ELECTROSPUN SYSTEMS Abstract in atti di convegno pubblicato in volume Go to
2019 Deposition and characterization of Hydroxyapatite-Chitosan coatings on 304 SS for biomedical devices Proceedings Go to
2018 In vitro degradation and bioactivity of composite poly-l-lactic (PLLA)/bioactive glass (BG) scaffolds: comparison of 45S5 and 1393BG compositions Articolo in rivista Go to
2018 Deposition and characterization of coatings of Hydroxyapatite, Chitosan, and Hydroxyapatite-Chitosan on 316L for biomedical devices Abstract in atti di convegno pubblicato in volume Go to
2018 Kefiran-based scaffolds for biomedical applications Articolo in rivista Go to
2018 Evaluation of hydroxyapatite distribution in a Poly-L-Lactic Acid (PLLA) scaffolds via Micro Computed Tomography (µCT) Articolo in rivista Go to
2018 Fast and green: Sustainable rapid-prototyping of microfluidic chips on polylactic acid substrates Contributo in atti di convegno pubblicato in volume Go to
2018 Composite Scaffolds with a Hydrohyapatite Spatial Gradient for Osteochondral Defect Repair Capitolo o Saggio Go to
2018 Laser Ablation of Poly(lactic acid) Sheets for the Rapid Prototyping of Sustainable, Single-Use, Disposable Medical Microcomponents Articolo in rivista Go to
2018 Preparation, characterization and in vitro test of composites poly-lactic acid/hydroxyapatite scaffolds for bone tissue engineering Articolo in rivista Go to
2018 Rapid prototyping for micro-engineering and microfluidic applications: Recycled pmma, a sustainable substrate material Contributo in atti di convegno pubblicato in volume Go to
2018 Preparation of Poly(l-lactic acid) Scaffolds by Thermally Induced Phase Separation: Role of Thermal History Articolo in rivista Go to
2017 Engineering approaches in siRNA delivery Articolo in rivista Go to
2017 Ultra-fast-prototyping of PMMA structures for micro-engineering applications: Choosing the right material Capitolo o Saggio Go to
2017 PLLA scaffolds produced by thermally induced phase separation (TIPS) allow human chondrocyte growth and extracellular matrix formation dependent on pore size Articolo in rivista Go to
2017 Double flow bioreactor for in vitro test of drug delivery Articolo in rivista Go to
2017 Characterization of PLLA scaffolds for biomedical applications Articolo in rivista Go to
2017 A poly-L-lactic acid/ collagen/glycosaminoglycan matrix for tissue engineering applications Articolo in rivista Go to
2016 Modulation of physical and biological properties of a composite PLLA and polyaspartamide derivative obtained via thermally induced phase separation (TIPS) technique Articolo in rivista Go to
2016 A Continuous Pore Size Gradient PLLA Scaffold For Osteochondral Regeneration Poster pubblicato in volume Go to
2016 Double Flow Bioreactor for In Vitro Test of Drug Delivery Proceedings Go to
2016 PLLA Scaffold via TIPS for Bone Tissue Engineering Articolo in rivista Go to
2016 Polmunary epithelial barrier formation on biodegradable poly-L-lactic-acid (PLLA) membrane Abstract in rivista Go to
2016 Evaluation of mechanical and morphologic features of PLLA membranes as supports for perfusion cells culture systems Articolo in rivista Go to
2016 Optimization of environmental conditions for kefiran production by kefir grain as scaffold for tissue engineering Articolo in rivista Go to
2016 Phase separation of polymer blends in solution: A case study Articolo in rivista Go to
2016 A Poly-L-Lactide scaffold with continuous gradient pore size for osteochondral regeneration validated in a microphysiological tissue system bioreactor Proceedings Go to
2015 Coagulation bath composition and desiccation environment as tuning parameters to prepare skinless membranes via diffusion induced phase separation Articolo in rivista Go to
2015 Study on heat transfer coefficients during cooling of PET bottles for food beverages Articolo in rivista Go to
2015 Optical characterization of phase transitions in pure polymers and blends Capitolo o Saggio Go to
2015 PLLA Scaffold with Gradient pore size in microphysiological tissue system bioreactor for Osteochondral regeneration Proceedings Go to
2015 Biological evaluation of PLLA membranes, with different pore diameters, to stimulate cell adhesion and growth in vitro Capitolo o Saggio Go to
2015 Preparation of polymeric foams with a pore size gradient via Thermally Induced Phase Separation (TIPS) Articolo in rivista Go to
2014 Peltier cells as temperature control elements: Experimental characterization and modelling Articolo in rivista Go to
2014 TISSUE ENGINEERING FOR THE DEVELOPMENT OF THREE-DIMENSIONAL INVITRO MODELS OF HUMAN MUCOSAE Proceedings Go to
2014 Membrane biodegradabili in PLLA preparate mediante DIPS (Diffusion Induced Phase Separation) come supporto per la rigenerazione di mucosa bronchiale umana Proceedings Go to
2014 Design, build-up and optimization of a fast quenching device for polymeric thin film Contributo in atti di convegno pubblicato in volume Go to
2014 Synthesis, characterization and foaming of PHEA-PLLA, a new graft copolymer for biomedical engineering Articolo in rivista Go to
2014 Evidence of Mechanisms Occurring in Thermally Induced Phase Separation of Polymeric Systems Articolo in rivista Go to
2014 PLLA/Fibrin Tubular Scaffold: A New Way for Reliable Endothelial Cell Seeding Proceedings Go to
2014 POROUS SCAFFOLDS BASED ON PLLA/FUNCTIONALISED POLYMERS BLENDS PRODUCED BY THERMALLY INDUCED PHASE SEPARATION Proceedings Go to
2013 Hydrophobic polymeric membranes: experimental characterization for membrane distillation applications Proceedings Go to
2013 Temperature influence on the morphology of porous structures prepared via Thermally Induced Phase Separation (TIPS) Proceedings Go to
2013 Poly-Left-Lactic Acid tubular scaffolds via Diffusion Induced Phase Separation (DIPS): control of morphology Articolo in rivista Go to
2013 AN EXPERIMENTAL APPARATUS TO CHARACTERIZE PHASE SEPARATION IN POLYMER SOLUTIONS Proceedings Go to
2013 Preparation and characterization of PLLA-HA scaffolds for bone tissue engineering Proceedings Go to
2013 Composites poly-lactic acid - hydroxyapatite scaffolds prepared via Thermally Induced Phase Separation Proceedings Go to
2013 Measurement of cloud point temperature in polymer solutions Articolo in rivista Go to
2013 Polymeric scaffolds based on blends of poly-l-lactic acid (PLLA) with poly-d-l- lactic acid (PLA) prepared via thermally induced phase separation (TIPS): demixing conditions and morphology Articolo in rivista Go to
2013 Tissue engineered vascular grafts based on poly-lactic acid blends Altro Go to
2013 PLLA-fibrin scaffolds for Vascular Tissue Engineering Proceedings Go to
2012 Solidification of Polypropylene Under Processing Conditions – Relevance of Cooling Rate, Pressure and Molecular Parameters Capitolo o Saggio Go to
2012 Morphology and thermal properties of foams prepared via thermally induced phase separation based on polylactic acid blends Articolo in rivista Go to
2012 Poly lactic acid based scaffolds as graft for small-diameter arterial replacement. Abstract in rivista Go to
2012 Il concetto di "no-flow temperature" e il problema della solidificazione in flusso durante lo stadio di riempimento nel processo di stampaggio ad iniezione Proceedings Go to
2012 Calculation of ternary polymer solution phase diagram via compressible lattice fluid model extended to specific interactions Altro Go to
2012 Poly lactic acid based foams prepared via Thermally Induced Phase Separation (TIPS): a method to tune the crystallinity. Capitolo o Saggio Go to
2012 PREPARATION AND HYDROLYTIC DEGRADATION OF POLY LACTIC ACID BASED SCAFFOLDS Proceedings Go to
2012 Modeling and experimental approaches for the characterization of phase equilibria in polymer solutions Proceedings Go to
2012 Poly lactic acid based scaffolds for vascular tissue engineering Articolo in rivista Go to
2012 Use of Modified 3D Scaffolds to Improve Cell Adhesion and Drive Desired Cell Responses. Capitolo o Saggio Go to
2012 CLOUD POINT MEASUREMENTS IN MEMBRANE FORMING SYSTEMS Proceedings Go to
2012 Evaluation of vapor mass transfer in various membrane distillation configurations: an experimental study Articolo in rivista Go to
2011 Theoretical Predictions and experimental determination of cloud point curves for polymeric solutions: an application to the ternary system Poly-lactic-acid (PLLA)-dioxane-water Proceedings Go to
2011 Structure and Morphology Control in Polymer Forming Through the Thermal History Proceedings Go to
2011 Characterization of commercial polymeric membranes for membrane distillation processes Proceedings Go to
2011 PHEA‐PLLA: A New Polymer Blend For Tissue Engineering Applications Capitolo o Saggio Go to
2011 Some Features of Polymeric Membranes for Water Purification via Membrane Distillation Articolo in rivista Go to
2011 Polyactide Biodegradable Scaffolds for Tissue Engineering Applications: Phase Separation-Based Techniques Capitolo o Saggio Go to
2011 Polylactide biodegradable scaffolds for tissue engineering applications phase separation-based techniques Capitolo o Saggio Go to
2011 A survey on models for the prediction of phase equilibria in polymer solutions Proceedings Go to
2011 Lattice fluid model generalized for specific interactions: An application to ternary polymer solutions Articolo in rivista Go to
2011 No-Flow Temperature in Injection Molding Simulation Articolo in rivista Go to
2011 PLA/PLLA scaffold for vascular tissue engineering applications Proceedings Go to
2011 Solidification during the filling stage of injection molding: a simulation-oriented study Proceedings Go to
2011 No-flow temperature and solidification in injection molding simulation Proceedings Go to
2011 A study via simulation of solidification during injection molding Proceedings Go to
2010 Water Fluxes in Polymeric Membranes for Desalination via Membrane Distillation Proceedings Go to
2010 A COMPOSITE PLLA SCAFFOLD FOR REGENERATION OF COMPLEX TISSUES Articolo in rivista Go to
2010 Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino Brevetto Go to
2010 TUBULAR SCAFFOLD FOR VASCULAR TISSUE ENGINEERING APPLICATION Articolo in rivista Go to
2010 Patent number PA2010 A 000023: Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino Brevetto Go to
2010 CHARACTERIZATION OF HYDROPHOBIC POLYMERIC MEMBRANES FOR MEMBRANE DISTILLATION PROCESS Articolo in rivista Go to
2010 Pre-vascularized PLLA scaffolds: A new approcah to develop deep tissue regeneration Proceedings Go to
2010 A composite PLLA scaffold for regeneration of complex tissues. Proceedings Go to
2010 On the calculation of free energy of mixing for aqueous polymer solutions with group-contribution models Articolo in rivista Go to
2009 PLLA scaffolds based on thermally induced phase separation: morphology, cell seeding and proliferation Proceedings Go to
2009 Procedimento di preparazione di scaffolds polimerici preangiogenizzati. Brevetto Go to
2009 The concept and the application of no-flow temperature (NFT) in simulation of injection moulding Proceedings Go to
2009 Thermal expansion of Glass fibre reinforced (GRF) thermoplastics: influence of the nature of the polymer matrix and of the fibre content Proceedings Go to
2009 Comparison of the solidification of a commercial PBT-PET blend with the behaviour of the constituents Proceedings Go to
2009 GENERATION OF PREVASCULARIZED PLLA BIODEGRADABLE SCAFFOLDS BY DIP DRAWING AND DIFFUSION INDUCED PHASE SEPARATION (DIPS). Proceedings Go to
2009 Tuning of biodegradation rate of PLLA scaffolds via blending with PLA Articolo in rivista Go to
2009 Demixing time and temperature influence on porosity and interconnection of PLLA scaffolds prepared via TIPS Articolo in rivista Go to
2009 PROCEDIMENTO DI PREPARAZIONE DI SCAFFOLD POLIMERICI PREANGIOGENIZZATI Brevetto Go to
2009 Tailoring PLLA scaffolds for tissue engineering applications: Morphologies for 2D and 3D cell cultures Articolo in rivista Go to
2009 The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions Articolo in rivista Go to
2009 Porous PLLA scaffolds are optimal substrates for internal colonization by A6 mesoangioblasts and immunocytochemical analyses Articolo in rivista Go to
2009 Membrane Distillation for a solar powered desalination pilot unit Proceedings Go to
2009 The Solidification Behavior of a PBT/PET Blend Over a Wide Range of Cooling Rate Articolo in rivista Go to
2009 Patent number RM2009A000073: Procedimento di preparazione di scaffold polimerici preangiogenizzati Brevetto Go to
2009 PLLA biodegradable scaffolds for Vascular Tissue Engineering (VTE) applications via dip drawing and Diffusion Induced Phase Separation (DIPS) Proceedings Go to
2008 CRYSTALLIZATION OF PBT/PET BLENDS UNDER LOW AND HIGH COOLING RATES: THERMODYNAMICS AND KINETICS CONSIDERATIONS Proceedings Go to
2008 Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content Articolo in rivista Go to
2008 Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology Articolo in rivista Go to
2008 PLLA biodegradable scaffolds for angiogenesis via Diffusion Induced Phase Separation (DIPS) Abstract in rivista Go to
2008 PLLA/PLA scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of properties and biodegradability Articolo in rivista Go to
2008 Blending PLLA with PLA so as to tune the biodegradabilty of polymeric scaffolds for soft tissue engineering Proceedings Go to
2008 The use of Diffusion Induced Phase Separation (DIPS) technique for the preparation of biodegradable scaffolds for angiogenesis Proceedings Go to
2007 Analysis of the crystallization behaviour of PBT-rich PBT/PET blends under processing conditions Proceedings Go to
2007 Process-morphology relationships on injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling Proceedings Go to
2007 Comparison of thin-wall injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling Proceedings Go to
2007 Crystallization Kinetics of iPP: Influence of Operating Conditions and Molecular Parameters Articolo in rivista Go to
2007 Polymeric scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of structure and morphology Proceedings Go to
2007 SOLIDIFICATION BEHAVIOUR OF PBT/PET BLENDS UNDER PROCESSING CONDITIONS Proceedings Go to
2007 Solidification of syndiotactic polystyrene by a continuous cooling transformation approach Articolo in rivista Go to
2006 A6 stem cells culture into a biodegradable PLLA scaffold Proceedings Go to
2006 Crystallization behaviour of PBT-rich PBT/PET blends according to a Continuous Cooling Transformation (CCT) protocol Proceedings Go to
2006 Synthesis of PLLA scaffolds for tissue engineering via phase separation Proceedings Go to
2006 Injection moulding of thin and thick iPP parts in epoxy resin and steel moulds: a comparative study on properties development Proceedings Go to
2006 Solidification of Syndiotactic Polistyrene (sPS) under Pressure and High Cooling Rate Proceedings Go to
2006 Metastability and post-forming behaviour of semi-crystalline polymers Proceedings Go to
2006 Una Metodologia Sperimentale per lo Studio della Cristallizzazione dei Polimeri in Condizioni di Processo. L'Influenza della Velocità di Raffreddamento Articolo in rivista Go to
2006 PLLA scaffolds for tissue engineering prepared via thermally induced phase separation Proceedings Go to
2006 Effect of pressure and high cooling rates on the solidification behaviour of sindiotactic polystryrene (sPS) Proceedings Go to
2005 The use of the indentation test for studying the solidification behaviour of different semicrystalline polymers during injection moulding Articolo in rivista Go to
2005 Determination of the volumetric thermal expansion coefficient of glass fiber reinforced (GFR) thermoplastics through Pressure-Volume-Temperature (PVT) measurements Proceedings Go to
2005 Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content Proceedings Go to
2005 Determination of the crystallization kinetics of a PBT/PET blend in relation to the behaviour of the constituents Proceedings Go to
2005 Crystallization kinetics of a PBT/PET blend according to a Continuous Cooling Transformation (CCT) approach Proceedings Go to
2005 Synthesis of a porous and biodegradable PLLA scaffold for application of tissue engineering Proceedings Go to
2004 Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT Proceedings Go to
2004 Realizzazione ed impiego di Scaffold polimerici per le applicazioni dell’Ingegneria tessutale Monografia Go to
2004 Studio della solidificazione durante lo stampaggio ad iniezione mediante un test di indentazione Proceedings Go to
2004 Preparation and properties of poly(L-lactic acid) scaffolds by thermally induced phase separation from a ternary polymer-solvent system Articolo in rivista Go to
2004 Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT Proceedings Go to
2004 Solidification of sindiotactic polystyrene (sPS) under drastic conditions by Continuous Cooling Transformation (CCT) Proceedings Go to
2004 Metastability and Post-forming behaviour of semi-crystalline polymers Proceedings Go to
2004 The use of master curves to describe the simultaneous effect of cooling rate and pressure on polymer crystallization Articolo in rivista Go to
2003 Orientation and crystallinity measurements in film casting products Articolo in rivista Go to
2003 Indentation test as a tool for monitoring the solidification process during injection molding Articolo in rivista Go to
2002 An experimental methodology to study polymer crystallization under processing conditions. The influence of high cooling rates Articolo in rivista Go to
2002 Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure Articolo in rivista Go to
2002 Influence of "Controlled Processing Conditions" on the solidification of iPP, PET and PA6 Articolo in rivista Go to
2002 Effect of pressure on the PVT behaviour of iPP as revealed by dilatometric measurements Articolo in rivista Go to
2000 Isotactic polypropylene solidification under pressure and high cooling rates. A master curve approach Articolo in rivista Go to
2000 Polymer Solidification under Pressure and High Cooling Rates Articolo in rivista Go to