| 2024 |
The Phenotype of Mesenchymal Stromal Cell and Articular Chondrocyte Cocultures on Highly Porous Bilayer Poly-L-Lactic Acid Scaffolds Produced by Thermally Induced Phase Separation and Supplemented with Hydroxyapatite |
Articolo in rivista |
Vai |
| 2024 |
Three-dimensional (3D) polylactic acid gradient scaffold to study the behavior of osteosarcoma cells under dynamic conditions |
Articolo in rivista |
Vai |
| 2024 |
Improvement of Osteogenic Differentiation of Mouse Pre-Osteoblastic MC3T3-E1 Cells on Core–Shell Polylactic Acid/Chitosan Electrospun Scaffolds for Bone Defect Repair |
Articolo in rivista |
Vai |
| 2023 |
Galvanic Deposition of Calcium Phosphate/Bioglass Composite Coating on AISI 316L |
Articolo in rivista |
Vai |
| 2023 |
Computational modeling and experimental characterization of fluid dynamics in micro-CT scanned scaffolds within a multiple-sample airlift perfusion bioreactor |
Articolo in rivista |
Vai |
| 2022 |
Physical and antibacterial properties of PLA electrospun mats loaded with carvacrol and nisin |
Articolo in rivista |
Vai |
| 2022 |
Integrated production of biopolymers with industrial wastewater treatment: Effects of OLR on process yields, biopolymers characteristics and mixed microbial community enrichment |
Articolo in rivista |
Vai |
| 2022 |
Behavior of Calcium Phosphate-Chitosan-Collagen Composite Coating on AISI 304 for Orthopedic Applications |
Articolo in rivista |
Vai |
| 2022 |
Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally Induced Phase Separation (TIPS) |
Articolo in rivista |
Vai |
| 2022 |
Composite Coatings of Chitosan and Silver Nanoparticles Obtained by Galvanic Deposition for Orthopedic Implants |
Articolo in rivista |
Vai |
| 2022 |
Occurrence of Microplastics in Waste Sludge of Wastewater Treatment Plants: Comparison between Membrane Bioreactor (MBR) and Conventional Activated Sludge (CAS) Technologies |
Articolo in rivista |
Vai |
| 2022 |
A dynamic air–liquid interface system for in vitro mimicking of the nasal mucosa |
Articolo in rivista |
Vai |
| 2022 |
Poly-L-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications |
Review essay (rassegna critica) |
Vai |
| 2022 |
Mathematical and numerical modeling of an airlift perfusion bioreactor for tissue engineering applications |
Articolo in rivista |
Vai |
| 2022 |
Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat |
Articolo in rivista |
Vai |
| 2021 |
Galvanic deposition of Hydroxyapatite/Chitosan/Collagen coatings on 304 stainless steel |
Articolo in rivista |
Vai |
| 2021 |
Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications |
Articolo in rivista |
Vai |
| 2021 |
Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes |
Articolo in rivista |
Vai |
| 2021 |
Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized via air-plasma treatment |
Articolo in rivista |
Vai |
| 2021 |
Novel dual-flow perfusion bioreactor for in vitro pre-screening of nanoparticles delivery: design, characterization and testing |
Articolo in rivista |
Vai |
| 2021 |
Solution-based processing for scaffold fabrication in tissue engineering applications: A brief review |
Review essay (rassegna critica) |
Vai |
| 2021 |
Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications |
Articolo in rivista |
Vai |
| 2021 |
Galvanic Deposition of Hydroxyapatite/Chitosan/Collagen Coatings on 304 Stainless Steel |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2021 |
Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering |
Articolo in rivista |
Vai |
| 2021 |
A High-Throughput Mechanical Activator for Cartilage Engineering Enables Rapid Screening of in vitro Response of Tissue Models to Physiological and Supra-Physiological Loads |
Articolo in rivista |
Vai |
| 2020 |
Development of injectable and durable kefiran hydro-alcoholic gels |
Articolo in rivista |
Vai |
| 2020 |
Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous mats |
Articolo in rivista |
Vai |
| 2020 |
3D polymeric supports promote the growth and progression of anaplastic thyroid carcinoma |
Articolo in rivista |
Vai |
| 2020 |
Polylactic is a Sustainable, Low Absorption, Low Autofluorescence Alternative to Other Plastics for Microfluidic and Organ-on-Chip Applications |
Articolo in rivista |
Vai |
| 2020 |
Improvement of osteogenic differentiation of human mesenchymal stem cells on composite poly l-lactic acid/nano-hydroxyapatite scaffolds for bone defect repair |
Articolo in rivista |
Vai |
| 2019 |
PREPARATION AND CHARACTERIZATION OF POLYLACTIC ACID/SILICA AND POLYLACTIC ACID/CLAYS BIONANOCOMPOSITE ELECTROSPUN SYSTEMS |
Abstract in atti di convegno pubblicato in volume |
Vai |
| 2019 |
Chitosan-Coating Deposition via Galvanic Coupling |
Articolo in rivista |
Vai |
| 2019 |
Blend scaffolds with polyaspartamide/polyester structure fabricated via TIPS and their RGDC functionalization to promote osteoblast adhesion and proliferation |
Articolo in rivista |
Vai |
| 2019 |
Human nasoseptal chondrocytes maintain their differentiated phenotype on PLLA scaffolds produced by thermally induced phase separation and supplemented with bioactive glass 1393 |
Articolo in rivista |
Vai |
| 2019 |
Valorisation of Dairy Wastes Through Kefir Grain Production |
Articolo in rivista |
Vai |
| 2019 |
Establishment of a pulmonary epithelial barrier on biodegradable poly-L-lactic-acid membranes |
Articolo in rivista |
Vai |
| 2019 |
Polylactide-based materials science strategies to improve tissue-material interface without the use of growth factors or other biological molecules |
Articolo in rivista |
Vai |
| 2019 |
PLLA scaffolds with controlled architecture as potential microenvironment for in vitro tumor model |
Articolo in rivista |
Vai |
| 2019 |
Deposition and characterization of Hydroxyapatite-Chitosan coatings on 304 SS for biomedical devices |
Proceedings |
Vai |
| 2019 |
Co-deposition and characterization of hydroxyapatite-chitosan and hydroxyapatite-polyvinylacetate coatings on 304 SS for biomedical devices |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2019 |
Porous biomaterials and scaffolds for tissue engineering |
Capitolo o Saggio |
Vai |
| 2018 |
In vitro degradation and bioactivity of composite poly-l-lactic (PLLA)/bioactive glass (BG) scaffolds: comparison of 45S5 and 1393BG compositions |
Articolo in rivista |
Vai |
| 2018 |
Evaluation of hydroxyapatite distribution in a Poly-L-Lactic Acid (PLLA) scaffolds via Micro Computed Tomography (µCT) |
Articolo in rivista |
Vai |
| 2018 |
Kefiran-based scaffolds for biomedical applications |
Articolo in rivista |
Vai |
| 2018 |
Composite Scaffolds with a Hydrohyapatite Spatial Gradient for Osteochondral Defect Repair |
Capitolo o Saggio |
Vai |
| 2018 |
Deposition and characterization of coatings of Hydroxyapatite, Chitosan, and Hydroxyapatite-Chitosan on 316L for biomedical devices |
Abstract in atti di convegno pubblicato in volume |
Vai |
| 2018 |
Laser Ablation of Poly(lactic acid) Sheets for the Rapid Prototyping of Sustainable, Single-Use, Disposable Medical Microcomponents |
Articolo in rivista |
Vai |
| 2018 |
Preparation, characterization and in vitro test of composites poly-lactic acid/hydroxyapatite scaffolds for bone tissue engineering |
Articolo in rivista |
Vai |
| 2018 |
Rapid prototyping for micro-engineering and microfluidic applications: Recycled pmma, a sustainable substrate material |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2018 |
Fast and green: Sustainable rapid-prototyping of microfluidic chips on polylactic acid substrates |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2018 |
Preparation of Poly(l-lactic acid) Scaffolds by Thermally Induced Phase Separation: Role of Thermal History |
Articolo in rivista |
Vai |
| 2017 |
Engineering approaches in siRNA delivery |
Articolo in rivista |
Vai |
| 2017 |
Ultra-fast-prototyping of PMMA structures for micro-engineering applications: Choosing the right material |
Capitolo o Saggio |
Vai |
| 2017 |
A poly-L-lactic acid/ collagen/glycosaminoglycan matrix for tissue engineering applications |
Articolo in rivista |
Vai |
| 2017 |
Double flow bioreactor for in vitro test of drug delivery |
Articolo in rivista |
Vai |
| 2017 |
PLLA scaffolds produced by thermally induced phase separation (TIPS) allow human chondrocyte growth and extracellular matrix formation dependent on pore size |
Articolo in rivista |
Vai |
| 2017 |
Characterization of PLLA scaffolds for biomedical applications |
Articolo in rivista |
Vai |
| 2016 |
Modulation of physical and biological properties of a composite PLLA and polyaspartamide derivative obtained via thermally induced phase separation (TIPS) technique |
Articolo in rivista |
Vai |
| 2016 |
PLLA Scaffold via TIPS for Bone Tissue Engineering |
Articolo in rivista |
Vai |
| 2016 |
A Poly-L-Lactide scaffold with continuous gradient pore size for osteochondral regeneration validated in a microphysiological tissue system bioreactor |
Proceedings |
Vai |
| 2016 |
Evaluation of mechanical and morphologic features of PLLA membranes as supports for perfusion cells culture systems |
Articolo in rivista |
Vai |
| 2016 |
Phase separation of polymer blends in solution: A case study |
Articolo in rivista |
Vai |
| 2016 |
Double Flow Bioreactor for In Vitro Test of Drug Delivery |
Proceedings |
Vai |
| 2016 |
Polmunary epithelial barrier formation on biodegradable poly-L-lactic-acid (PLLA) membrane |
Abstract in rivista |
Vai |
| 2016 |
Optimization of environmental conditions for kefiran production by kefir grain as scaffold for tissue engineering |
Articolo in rivista |
Vai |
| 2016 |
A Continuous Pore Size Gradient PLLA Scaffold For Osteochondral Regeneration |
Poster pubblicato in volume |
Vai |
| 2015 |
Optical characterization of phase transitions in pure polymers and blends |
Capitolo o Saggio |
Vai |
| 2015 |
PLLA Scaffold with Gradient pore size in microphysiological tissue system bioreactor for Osteochondral regeneration |
Proceedings |
Vai |
| 2015 |
Coagulation bath composition and desiccation environment as tuning parameters to prepare skinless membranes via diffusion induced phase separation |
Articolo in rivista |
Vai |
| 2015 |
Study on heat transfer coefficients during cooling of PET bottles for food beverages |
Articolo in rivista |
Vai |
| 2015 |
Preparation of polymeric foams with a pore size gradient via Thermally Induced Phase Separation (TIPS) |
Articolo in rivista |
Vai |
| 2015 |
Biological evaluation of PLLA membranes, with different pore diameters, to stimulate cell adhesion and growth in vitro |
Capitolo o Saggio |
Vai |
| 2014 |
PLLA/Fibrin Tubular Scaffold: A New Way for Reliable
Endothelial Cell Seeding |
Proceedings |
Vai |
| 2014 |
Synthesis, characterization and foaming of PHEA-PLLA, a new graft copolymer for biomedical engineering |
Articolo in rivista |
Vai |
| 2014 |
Peltier cells as temperature control elements: Experimental characterization and modelling |
Articolo in rivista |
Vai |
| 2014 |
Design, build-up and optimization of a fast quenching device for polymeric thin film |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2014 |
TISSUE ENGINEERING FOR THE DEVELOPMENT OF THREE-DIMENSIONAL INVITRO MODELS OF HUMAN MUCOSAE |
Proceedings |
Vai |
| 2014 |
Membrane biodegradabili in PLLA preparate mediante DIPS (Diffusion Induced Phase Separation) come supporto per la rigenerazione di mucosa bronchiale umana |
Proceedings |
Vai |
| 2014 |
POROUS SCAFFOLDS BASED ON PLLA/FUNCTIONALISED POLYMERS BLENDS PRODUCED BY THERMALLY INDUCED PHASE SEPARATION |
Proceedings |
Vai |
| 2014 |
Evidence of Mechanisms Occurring in Thermally Induced Phase Separation of Polymeric Systems |
Articolo in rivista |
Vai |
| 2013 |
AN EXPERIMENTAL APPARATUS TO CHARACTERIZE PHASE SEPARATION IN POLYMER SOLUTIONS |
Proceedings |
Vai |
| 2013 |
Tissue engineered vascular grafts based on
poly-lactic acid blends |
Altro |
Vai |
| 2013 |
PLLA-fibrin scaffolds for Vascular Tissue Engineering |
Proceedings |
Vai |
| 2013 |
Poly-Left-Lactic Acid tubular scaffolds via Diffusion Induced Phase Separation (DIPS): control of morphology |
Articolo in rivista |
Vai |
| 2013 |
Polymeric scaffolds based on blends of poly-l-lactic acid (PLLA) with poly-d-l- lactic acid (PLA) prepared via thermally induced phase separation (TIPS): demixing conditions and morphology |
Articolo in rivista |
Vai |
| 2013 |
Temperature influence on the morphology of porous structures prepared via Thermally Induced Phase Separation (TIPS) |
Proceedings |
Vai |
| 2013 |
Preparation and characterization of PLLA-HA scaffolds for bone tissue engineering |
Proceedings |
Vai |
| 2013 |
Hydrophobic polymeric membranes: experimental characterization for membrane distillation applications |
Proceedings |
Vai |
| 2013 |
Measurement of cloud point temperature in polymer solutions |
Articolo in rivista |
Vai |
| 2013 |
Composites poly-lactic acid - hydroxyapatite scaffolds prepared via Thermally Induced Phase Separation |
Proceedings |
Vai |
| 2012 |
Poly lactic acid based foams prepared via Thermally Induced Phase Separation (TIPS): a method to tune the crystallinity. |
Capitolo o Saggio |
Vai |
| 2012 |
Solidification of Polypropylene Under Processing Conditions – Relevance of Cooling Rate, Pressure and Molecular Parameters |
Capitolo o Saggio |
Vai |
| 2012 |
Calculation of ternary polymer solution phase diagram via compressible lattice fluid model extended to specific interactions |
Altro |
Vai |
| 2012 |
CLOUD POINT MEASUREMENTS IN MEMBRANE FORMING SYSTEMS |
Proceedings |
Vai |
| 2012 |
Poly lactic acid based scaffolds as graft for small-diameter arterial replacement. |
Abstract in rivista |
Vai |
| 2012 |
Il concetto di "no-flow temperature" e il problema della solidificazione in flusso durante lo stadio di riempimento nel processo di stampaggio ad iniezione |
Proceedings |
Vai |
| 2012 |
Evaluation of vapor mass transfer in various membrane distillation configurations: an experimental study |
Articolo in rivista |
Vai |
| 2012 |
Modeling and experimental approaches for the characterization of phase equilibria in polymer solutions |
Proceedings |
Vai |
| 2012 |
PREPARATION AND HYDROLYTIC DEGRADATION OF POLY LACTIC ACID BASED SCAFFOLDS |
Proceedings |
Vai |
| 2012 |
Morphology and thermal properties of foams prepared via thermally induced phase separation based on polylactic acid blends |
Articolo in rivista |
Vai |
| 2012 |
Poly lactic acid based scaffolds for vascular tissue engineering |
Articolo in rivista |
Vai |
| 2012 |
Use of Modified 3D Scaffolds to Improve Cell Adhesion and Drive Desired Cell Responses. |
Capitolo o Saggio |
Vai |
| 2011 |
Some Features of Polymeric Membranes for Water Purification via Membrane Distillation |
Articolo in rivista |
Vai |
| 2011 |
No-Flow Temperature in Injection Molding Simulation |
Articolo in rivista |
Vai |
| 2011 |
A survey on models for the prediction of phase equilibria in polymer solutions |
Proceedings |
Vai |
| 2011 |
Structure and Morphology Control in Polymer Forming Through the Thermal History |
Proceedings |
Vai |
| 2011 |
Theoretical Predictions and experimental determination of cloud point curves for polymeric solutions: an application to the ternary system Poly-lactic-acid (PLLA)-dioxane-water |
Proceedings |
Vai |
| 2011 |
Solidification during the filling stage of injection molding: a simulation-oriented study |
Proceedings |
Vai |
| 2011 |
Polylactide biodegradable scaffolds for tissue engineering applications phase separation-based techniques |
Capitolo o Saggio |
Vai |
| 2011 |
Characterization of commercial polymeric membranes for membrane distillation processes |
Proceedings |
Vai |
| 2011 |
Polyactide Biodegradable Scaffolds for Tissue Engineering Applications: Phase Separation-Based Techniques |
Capitolo o Saggio |
Vai |
| 2011 |
Lattice fluid model generalized for specific interactions: An application to ternary polymer solutions |
Articolo in rivista |
Vai |
| 2011 |
PHEA‐PLLA: A New Polymer Blend For Tissue Engineering Applications |
Capitolo o Saggio |
Vai |
| 2011 |
PLA/PLLA scaffold for vascular tissue engineering applications |
Proceedings |
Vai |
| 2011 |
A study via simulation of solidification during injection molding |
Proceedings |
Vai |
| 2011 |
No-flow temperature and solidification in injection molding simulation |
Proceedings |
Vai |
| 2010 |
On the calculation of free energy of mixing for aqueous polymer solutions with group-contribution models |
Articolo in rivista |
Vai |
| 2010 |
A composite PLLA scaffold for regeneration of complex tissues. |
Proceedings |
Vai |
| 2010 |
Pre-vascularized PLLA scaffolds: A new approcah to develop deep tissue regeneration |
Proceedings |
Vai |
| 2010 |
Patent number PA2010 A 000023: Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino |
Brevetto |
Vai |
| 2010 |
Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino |
Brevetto |
Vai |
| 2010 |
Water Fluxes in Polymeric Membranes for Desalination via Membrane Distillation |
Proceedings |
Vai |
| 2010 |
TUBULAR SCAFFOLD FOR VASCULAR TISSUE ENGINEERING APPLICATION |
Articolo in rivista |
Vai |
| 2010 |
CHARACTERIZATION OF HYDROPHOBIC POLYMERIC MEMBRANES FOR MEMBRANE DISTILLATION PROCESS |
Articolo in rivista |
Vai |
| 2010 |
A COMPOSITE PLLA SCAFFOLD FOR REGENERATION OF COMPLEX TISSUES |
Articolo in rivista |
Vai |
| 2009 |
Procedimento di preparazione di scaffolds polimerici preangiogenizzati. |
Brevetto |
Vai |
| 2009 |
PROCEDIMENTO DI PREPARAZIONE DI SCAFFOLD POLIMERICI PREANGIOGENIZZATI |
Brevetto |
Vai |
| 2009 |
GENERATION OF PREVASCULARIZED PLLA
BIODEGRADABLE SCAFFOLDS BY DIP
DRAWING AND DIFFUSION INDUCED PHASE
SEPARATION (DIPS). |
Proceedings |
Vai |
| 2009 |
Thermal expansion of Glass fibre reinforced (GRF) thermoplastics: influence of the nature of the polymer matrix and of the fibre content |
Proceedings |
Vai |
| 2009 |
Membrane Distillation for a solar powered desalination pilot unit |
Proceedings |
Vai |
| 2009 |
Porous PLLA scaffolds are optimal substrates for internal colonization by A6 mesoangioblasts
and immunocytochemical analyses |
Articolo in rivista |
Vai |
| 2009 |
The continuous cooling transformation (CCT) as a flexible tool to investigate polymer crystallization under processing conditions |
Articolo in rivista |
Vai |
| 2009 |
Tailoring PLLA scaffolds for tissue engineering applications: Morphologies for 2D and 3D cell cultures |
Articolo in rivista |
Vai |
| 2009 |
PLLA biodegradable scaffolds for Vascular Tissue Engineering (VTE) applications via dip drawing and Diffusion Induced Phase Separation (DIPS) |
Proceedings |
Vai |
| 2009 |
Tuning of biodegradation rate of PLLA scaffolds via blending with PLA |
Articolo in rivista |
Vai |
| 2009 |
Comparison of the solidification of a commercial PBT-PET blend with the behaviour of the constituents |
Proceedings |
Vai |
| 2009 |
The concept and the application of no-flow temperature (NFT) in simulation of injection moulding |
Proceedings |
Vai |
| 2009 |
PLLA scaffolds based on thermally induced phase separation: morphology, cell seeding and proliferation |
Proceedings |
Vai |
| 2009 |
The Solidification Behavior of a PBT/PET Blend Over a Wide Range of Cooling Rate |
Articolo in rivista |
Vai |
| 2009 |
Demixing time and temperature influence on porosity and interconnection of PLLA scaffolds prepared via TIPS |
Articolo in rivista |
Vai |
| 2009 |
Patent number RM2009A000073: Procedimento di preparazione di scaffold polimerici preangiogenizzati |
Brevetto |
Vai |
| 2008 |
PLLA biodegradable scaffolds for angiogenesis via Diffusion Induced Phase Separation (DIPS) |
Abstract in rivista |
Vai |
| 2008 |
Blending PLLA with PLA so as to tune the biodegradabilty of polymeric scaffolds for soft tissue engineering |
Proceedings |
Vai |
| 2008 |
The use of Diffusion Induced Phase Separation (DIPS) technique for the preparation of biodegradable scaffolds for angiogenesis |
Proceedings |
Vai |
| 2008 |
PLLA/PLA scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of properties and biodegradability |
Articolo in rivista |
Vai |
| 2008 |
CRYSTALLIZATION OF PBT/PET BLENDS UNDER LOW AND HIGH COOLING RATES: THERMODYNAMICS AND KINETICS CONSIDERATIONS |
Proceedings |
Vai |
| 2008 |
Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content |
Articolo in rivista |
Vai |
| 2008 |
Polymeric scaffolds prepared via thermally induced phase separation: Tuning of structure and morphology |
Articolo in rivista |
Vai |
| 2007 |
Polymeric scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of structure and morphology |
Proceedings |
Vai |
| 2007 |
Analysis of the crystallization behaviour of PBT-rich PBT/PET blends under processing conditions |
Proceedings |
Vai |
| 2007 |
Process-morphology relationships on injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling |
Proceedings |
Vai |
| 2007 |
SOLIDIFICATION BEHAVIOUR OF PBT/PET BLENDS
UNDER PROCESSING CONDITIONS |
Proceedings |
Vai |
| 2007 |
Comparison of thin-wall injection moulding of isotactic polypropylene in standard steel tool and rapid epoxy tooling |
Proceedings |
Vai |
| 2007 |
Solidification of syndiotactic polystyrene by a continuous cooling transformation approach |
Articolo in rivista |
Vai |
| 2007 |
Crystallization Kinetics of iPP: Influence of Operating Conditions and Molecular Parameters |
Articolo in rivista |
Vai |
| 2006 |
A6 stem cells culture into a biodegradable PLLA scaffold |
Proceedings |
Vai |
| 2006 |
Metastability and post-forming behaviour of semi-crystalline polymers |
Proceedings |
Vai |
| 2006 |
Effect of pressure and high cooling rates on the solidification behaviour of sindiotactic polystryrene (sPS) |
Proceedings |
Vai |
| 2006 |
Solidification of Syndiotactic Polistyrene (sPS) under Pressure and High Cooling Rate |
Proceedings |
Vai |
| 2006 |
Crystallization behaviour of PBT-rich PBT/PET blends according to a Continuous Cooling Transformation (CCT) protocol |
Proceedings |
Vai |
| 2006 |
Injection moulding of thin and thick iPP parts in epoxy resin and steel moulds: a comparative study on properties development |
Proceedings |
Vai |
| 2006 |
PLLA scaffolds for tissue engineering prepared via thermally induced phase separation |
Proceedings |
Vai |
| 2006 |
Synthesis of PLLA scaffolds for tissue engineering via phase separation |
Proceedings |
Vai |
| 2006 |
Una Metodologia Sperimentale per lo Studio della Cristallizzazione dei Polimeri in Condizioni di Processo. L'Influenza della Velocità di Raffreddamento |
Articolo in rivista |
Vai |
| 2005 |
Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content |
Proceedings |
Vai |
| 2005 |
Synthesis of a porous and biodegradable PLLA scaffold for application of tissue engineering |
Proceedings |
Vai |
| 2005 |
Determination of the volumetric thermal expansion coefficient of glass fiber reinforced (GFR) thermoplastics through Pressure-Volume-Temperature (PVT) measurements |
Proceedings |
Vai |
| 2005 |
Determination of the crystallization kinetics of a PBT/PET blend in relation to the behaviour of the constituents |
Proceedings |
Vai |
| 2005 |
Crystallization kinetics of a PBT/PET blend according to a Continuous Cooling Transformation (CCT) approach |
Proceedings |
Vai |
| 2005 |
The use of the indentation test for studying the solidification behaviour of different semicrystalline polymers during injection moulding |
Articolo in rivista |
Vai |
| 2004 |
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT |
Proceedings |
Vai |
| 2004 |
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by CCT |
Proceedings |
Vai |
| 2004 |
Studio della solidificazione durante lo stampaggio ad iniezione mediante un test di indentazione |
Proceedings |
Vai |
| 2004 |
Metastability and Post-forming behaviour of semi-crystalline polymers |
Proceedings |
Vai |
| 2004 |
Preparation and properties of poly(L-lactic acid) scaffolds by thermally induced phase separation from a ternary polymer-solvent system |
Articolo in rivista |
Vai |
| 2004 |
The use of master curves to describe the simultaneous effect of cooling rate and pressure on polymer crystallization |
Articolo in rivista |
Vai |
| 2004 |
Solidification of sindiotactic polystyrene (sPS) under drastic conditions by Continuous Cooling Transformation (CCT) |
Proceedings |
Vai |
| 2004 |
Realizzazione ed impiego di Scaffold polimerici per le applicazioni dell’Ingegneria tessutale |
Monografia |
Vai |
| 2003 |
Orientation and crystallinity measurements in film casting products |
Articolo in rivista |
Vai |
| 2003 |
Indentation test as a tool for monitoring the solidification process during injection molding |
Articolo in rivista |
Vai |
| 2002 |
An experimental methodology to study polymer crystallization under processing conditions. The influence of high cooling rates |
Articolo in rivista |
Vai |
| 2002 |
Influence of "Controlled Processing Conditions" on the solidification of iPP, PET and PA6 |
Articolo in rivista |
Vai |
| 2002 |
Phenomenological approach to compare the crystallization kinetics of isotactic polypropylene and polyamide-6 under pressure |
Articolo in rivista |
Vai |
| 2002 |
Effect of pressure on the PVT behaviour of iPP as revealed by dilatometric measurements |
Articolo in rivista |
Vai |
| 2000 |
Polymer Solidification under Pressure and High Cooling Rates |
Articolo in rivista |
Vai |
| 2000 |
Isotactic polypropylene solidification under pressure and high cooling rates. A master curve approach |
Articolo in rivista |
Vai |
