2024 |
Improvement of Osteogenic Differentiation of Mouse Pre-Osteoblastic MC3T3-E1 Cells on Core–Shell Polylactic Acid/Chitosan Electrospun Scaffolds for Bone Defect Repair |
Articolo in rivista |
Vai |
2024 |
Influence of Biochar on the Properties of Antibacterial PBAT/Carvacrol Films |
Articolo in rivista |
Vai |
2024 |
New Nanovesicles from Prickly Pear Fruit Juice: A Resource with Antioxidant, Anti-Inflammatory, and Nutrigenomic Properties |
Articolo in rivista |
Vai |
2023 |
Galvanic Deposition of Calcium Phosphate/Bioglass Composite Coating on AISI 316L |
Articolo in rivista |
Vai |
2023 |
Computational modeling and experimental characterization of fluid dynamics in micro-CT scanned scaffolds within a multiple-sample airlift perfusion bioreactor |
Articolo in rivista |
Vai |
2022 |
Biocomposite PBAT/lignin blown films with enhanced photo-stability |
Articolo in rivista |
Vai |
2022 |
Behavior of Calcium Phosphate-Chitosan-Collagen Composite Coating on AISI 304 for Orthopedic Applications |
Articolo in rivista |
Vai |
2022 |
Occurrence of Microplastics in Waste Sludge of Wastewater Treatment Plants: Comparison between Membrane Bioreactor (MBR) and Conventional Activated Sludge (CAS) Technologies |
Articolo in rivista |
Vai |
2022 |
Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally Induced Phase Separation (TIPS) |
Articolo in rivista |
Vai |
2022 |
Composite Coatings of Chitosan and Silver Nanoparticles Obtained by Galvanic Deposition for Orthopedic Implants |
Articolo in rivista |
Vai |
2022 |
BIODEGRADABLE POLYMER-BASED COMPOSITES FILLED WITH BIOCHAR FOR TUNABLE RELEASE OF CARVACROL |
Contributo in atti di convegno pubblicato in volume |
Vai |
2022 |
Integrated production of biopolymers with industrial wastewater treatment: Effects of OLR on process yields, biopolymers characteristics and mixed microbial community enrichment |
Articolo in rivista |
Vai |
2022 |
Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat |
Articolo in rivista |
Vai |
2022 |
Physical and antibacterial properties of PLA electrospun mats loaded with carvacrol and nisin |
Articolo in rivista |
Vai |
2022 |
Poly-L-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications |
Review essay (rassegna critica) |
Vai |
2021 |
Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering |
Articolo in rivista |
Vai |
2021 |
PBAT based composites reinforced with microcrystalline cellulose obtained from softwood almond shells |
Articolo in rivista |
Vai |
2021 |
Use of biochar as filler for biocomposite blown films: Structure-processing-properties relationships |
Articolo in rivista |
Vai |
2021 |
Engineered membranes for residual cell trapping on microfluidic blood plasma separation systems. A comparison between porous and nanofibrous membranes |
Articolo in rivista |
Vai |
2021 |
Combining carvacrol and nisin in biodegradable films for antibacterial packaging applications |
Articolo in rivista |
Vai |
2021 |
Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications |
Articolo in rivista |
Vai |
2021 |
Solution-based processing for scaffold fabrication in tissue engineering applications: A brief review |
Review essay (rassegna critica) |
Vai |
2021 |
PANI-based wearable electrochemical sensor for pH sweat monitoring |
Articolo in rivista |
Vai |
2021 |
Core-shell PLA/Kef hybrid scaffolds for skin tissue engineering applications prepared by direct kefiran coating on PLA electrospun fibers optimized via air-plasma treatment |
Articolo in rivista |
Vai |
2021 |
Carvacrol activated biopolymeric foam: An effective packaging system to control the development of spoilage and pathogenic bacteria on sliced pumpkin and melon |
Articolo in rivista |
Vai |
2020 |
Structure–property relationship and controlled drug release from multiphasic electrospun carvacrol-embedded polylactic acid/polyethylene glycol and polylactic acid/polyethylene oxide nanofiber mats |
Articolo in rivista |
Vai |
2020 |
Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous mats |
Articolo in rivista |
Vai |
2020 |
Flexible mats as promising antimicrobial systems via integration of Thymus capitatus (L.) essential oil into PLA |
Articolo in rivista |
Vai |
2020 |
In vitro antifungal activity of biopolymeric foam activated with carvacrol |
Articolo in rivista |
Vai |
2020 |
Innovative, ecofriendly biosorbent-biodegrading biofilms for bioremediation of oil- contaminated water |
Articolo in rivista |
Vai |
2019 |
Effect of graphene and fabrication technique on the release kinetics of carvacrol from polylactic acid |
Articolo in rivista |
Vai |
2019 |
PREPARATION AND CHARACTERIZATION OF POLYLACTIC ACID/SILICA AND POLYLACTIC ACID/CLAYS BIONANOCOMPOSITE ELECTROSPUN SYSTEMS |
Abstract in atti di convegno pubblicato in volume |
Vai |
2019 |
Structure and composition of intertidal biofilms which enhance the settlement of the central-Mediterranean reef builder Dendropoma cristatum (Biondi 1859). |
Abstract in atti di convegno pubblicato in volume |
Vai |
2019 |
Antibacterial biopolymeric foams: Structure–property relationship and carvacrol release kinetics |
Articolo in rivista |
Vai |
2018 |
Efficacy of poly(lactic acid)/carvacrol electrospun membranes against Staphylococcus aureus and Candida albicans in single and mixed cultures |
Articolo in rivista |
Vai |
2018 |
Antimicrobial additives for poly(lactic acid) materials and their applications: current state and perspectives |
Articolo in rivista |
Vai |
2018 |
Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets |
Articolo in rivista |
Vai |
2018 |
Processing, structure, property relationships and release kinetics of electrospun PLA/Carvacrol membranes |
Articolo in rivista |
Vai |
2018 |
Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves |
Articolo in rivista |
Vai |
2018 |
Innovative ready to use carrier-bacteria devices for bioremediation of oil contaminated water |
Abstract in atti di convegno pubblicato in volume |
Vai |
2018 |
PLA based biocomposites reinforced with Posidonia oceanica leaves |
Articolo in rivista |
Vai |
2017 |
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships |
Articolo in rivista |
Vai |
2017 |
Nanocarbons in electrospun polymeric nanomats for tissue engineering: A review |
Articolo in rivista |
Vai |
2017 |
Using Taguchi method for the optimization of processing variables to prepare porous scaffolds by combined melt mixing/particulate leaching |
Articolo in rivista |
Vai |
2017 |
Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning |
Articolo in rivista |
Vai |
2017 |
Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water: Porous PCL system obtained by leaching melt mixed PCL/PEG/NaCl composites: Oil uptake performance and bioremediation efficiency |
Articolo in rivista |
Vai |
2017 |
Blue biotechnology: oil bioremediation using hydrocarbon-degrading bacteria immobilized on biodegradable membranes |
Poster pubblicato in volume |
Vai |
2017 |
Development of polymeric functionally graded scaffolds: A brief review |
Articolo in rivista |
Vai |
2017 |
Bi-layer PCL/PLA scaffold prepared by melt for interface tissue engineering |
Abstract non pubblicato |
Vai |
2017 |
Enhancement of antibiotic productions by plasma modified PLA electrospun membranes in Streptomyces coelicolor immobilized-cell cultivations |
Abstract in atti di convegno pubblicato in volume |
Vai |
2017 |
Plasma modified PLA electrospun membranes for actinorhodin production intensification in Streptomyces coelicolor immobilized-cell cultivations |
Articolo in rivista |
Vai |
2017 |
Biopolymeric porous structure for selective oil sorption and activity intensification of oil-degrading bacteria |
Abstract non pubblicato |
Vai |
2017 |
Green Nanocomposites-Based on PLA and Natural Organic Fillers |
Capitolo o Saggio |
Vai |
2017 |
IMPROVED PRODUCTION OF THE ANTIBIOTIC ACTINORHODIN IN STREPTOMYCES COELICOLOR IMMOBILIZED-MYCELIAL CELL CULTIVATIONS |
Poster pubblicato in volume |
Vai |
2017 |
PLA/PCL nanofibrous blends via multi-jet electrospinning: processing-morphology-property relationships |
Abstract in atti di convegno pubblicato in rivista |
Vai |
2017 |
Silica as a green exfoliant agent for graphene oxidepolymer nanocomposites prepared in the melt |
Abstract in atti di convegno pubblicato in rivista |
Vai |
2017 |
Polysaccharide nanocrystals as fillers for PLA based nanocomposites |
Articolo in rivista |
Vai |
2016 |
A facile and eco-friendly route to fabricate poly(Lactic acid) scaffolds with graded pore size |
Articolo in rivista |
Vai |
2016 |
Improvement of actinorhodin production yield in Streptomyces coelicolor by immobilized-cell cultivations by using PCL- and PLA-based films |
Poster pubblicato in volume |
Vai |
2016 |
Actinorhodin production intensification by nanofibrous membranes in Streptomyces coelicolor cultures |
Poster pubblicato in volume |
Vai |
2016 |
Blue biotechnology: enhancement of bioremediation using bacterial biofilms on biodegradable scaffolds |
Abstract in atti di convegno pubblicato in volume |
Vai |
2016 |
Implication of the biofilm ageing for the settlement of the vermetid gastropod Dendropoma cristatum (Biondi 1857) |
Abstract in atti di convegno pubblicato in volume |
Vai |
2016 |
Synthesis of a biocompatible aerogel based on graphene oxide and a modified polyethylene glycol |
Proceedings |
Vai |
2016 |
Melt development of biphasic functionally graded scaffold |
Abstract in atti di convegno pubblicato in rivista |
Vai |
2016 |
Preparation and characterization of PCL/GO-g-PEG biocomposite nanofiber scaffolds |
Proceedings |
Vai |
2016 |
Preparation and mechanical characterization of polycaprolactone/graphene oxide biocomposite nanofibers |
Proceedings |
Vai |
2016 |
Effect of PCL/PEG-Based Membranes on Actinorhodin Production in Streptomyces coelicolor Cultivations |
Articolo in rivista |
Vai |
2016 |
Mechanical behavior of polylactic acid/polycaprolactone porous layered functional composites |
Articolo in rivista |
Vai |
2016 |
Synthesis and self-assembly of a PEGylated-graphene aerogel |
Articolo in rivista |
Vai |
2016 |
Three-layered porous device in PCL/PEG blend for interface tissue engineering |
Proceedings |
Vai |
2016 |
Preparation of three-layered porous PLA/PEG scaffold: Relationship between morphology, mechanical behavior and cell permeability |
Articolo in rivista |
Vai |
2016 |
Integration of PCL and PLA in a monolithic porous scaffold for interface tissue engineering |
Articolo in rivista |
Vai |
2016 |
Melt Processed PCL/PEG Scaffold with Discrete Pore Size Gradient for Selective Cellular Infiltration |
Articolo in rivista |
Vai |
2016 |
Effect of Streptomyces coelicolor M145 cell immobilization on actinorhodin production |
Abstract in atti di convegno pubblicato in volume |
Vai |
2015 |
Synthesis and characterization of PEGylated graphene oxide for sorafenib modified release |
Proceedings |
Vai |
2015 |
A facile method to determine pore size distribution in porous scaffold by using image processing |
Articolo in rivista |
Vai |
2015 |
Bio-polymeric based sponges for oily waste recovery |
Proceedings |
Vai |
2015 |
A new scaffold-bacteria-based system for bioremediation of oil contaminated water |
Proceedings |
Vai |
2015 |
PCL/PEG based membranes for bacterial cells immobilization stimulate actinorhodin antibiotic production in S. coelicolor |
Abstract in atti di convegno pubblicato in volume |
Vai |
2014 |
Scaffold con gradiente della dimensione dei pori per la migrazione selettiva di cellule eterotipiche |
Proceedings |
Vai |
2014 |
Pore size graded scaffold for selective cellular permeation |
Proceedings |
Vai |
2014 |
Rapid and eco-friendly synthesis of graphene oxide-silica nanohybrids |
Proceedings |
Vai |
2013 |
Preparation and characterization of multilayer porous PLA scaffolds |
Proceedings |
Vai |