| 2024 |
Robotization of the IR-Thermographic technique – impact on the visualisation quality and considerations on the data workflow |
Contributo in atti di convegno pubblicato in rivista |
Vai |
| 2024 |
Statistical Shape Modelling as a Tool for Medical Reverse Engineering |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2023 |
On the use of two emerging laser-based flaw-detection techniques-Considerations and practicalities |
Articolo in rivista |
Vai |
| 2023 |
Adding Autonomy to Robotic Enabled Sensing |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2023 |
Fractional Calculus as a New Perspective in the Viscoelastic Behaviour of the Intervertebral Disc |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2023 |
On the Finite Element Modeling of the Lumbar Spine: A Schematic Review |
Articolo in rivista |
Vai |
| 2022 |
Autonomous Robotic Sensing for Simultaneous Geometric and Volumetric Inspection of Free-Form Parts |
Articolo in rivista |
Vai |
| 2022 |
Solving ultrasonic ray tracing in parts with multiple material layers through Root-Finding methods |
Articolo in rivista |
Vai |
| 2022 |
A Population-Based 3D Atlas of the Pathological Lumbar Spine Segment |
Articolo in rivista |
Vai |
| 2022 |
Fine Alignment of Thermographic Images for Robotic Inspection of Parts with Complex Geometries |
Articolo in rivista |
Vai |
| 2022 |
Mimicking human autonomy in industrial robotic enabled sensing |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2021 |
Laser Ultrasonics Inspection of Train Wheel - Evaluation of Optimized Setup |
Capitolo o Saggio |
Vai |
| 2021 |
Autonomous 3D geometry reconstruction through robot-manipulated optical sensors |
Articolo in rivista |
Vai |
| 2021 |
Generalised Bisection Method for Optimum Ultrasonic Ray Tracing and Focusing in Multi-Layered Structures |
Articolo in rivista |
Vai |
| 2020 |
Laser ultrasonics for defect evaluation on coated railway axles |
Articolo in rivista |
Vai |
| 2019 |
Evaluation of Vertical Fatigue Cracks by Means of Flying Laser Thermography |
Articolo in rivista |
Vai |
| 2019 |
Use of the KSVM-based system for the definition, validation and identification of the incisional hernia recurrence risk factors |
Articolo in rivista |
Vai |
| 2019 |
Laser Ultrasonics Inspection for Defect Evaluation on Train Wheel |
Articolo in rivista |
Vai |
| 2019 |
Novel non-destructive evaluation technique for the detection of poor dispersion of carbon nanotubes in nanocomposites |
Articolo in rivista |
Vai |
| 2018 |
FEM and experimental analysis of a total knee prosthesis |
Articolo in rivista |
Vai |
| 2018 |
Defect detection in additively manufactured titanium prosthesis by flying laser scanning thermography |
Articolo in rivista |
Vai |
| 2018 |
Defect Detection in Additively Manufactured Components: Laser Ultrasound and Laser Thermography Comparison |
Contributo in atti di convegno pubblicato in rivista |
Vai |
| 2018 |
Evaluation of interlaminar delaminations in titanium-graphite fibre metal laminates by infrared NDT techniques |
Articolo in rivista |
Vai |
| 2018 |
A Numerical Study on Interlaminar Defects Characterization in Fibre Metal Laminates with Flying Laser Spot Thermography |
Articolo in rivista |
Vai |
| 2018 |
A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts |
Articolo in rivista |
Vai |
| 2017 |
B-Scan image analysis for position and shape defect definition in plates |
Capitolo o Saggio |
Vai |
| 2017 |
Flying laser spot thermography for the inspection of aerospace grade Fibre Metal Laminates |
Contributo in atti di convegno pubblicato in volume |
Vai |
| 2017 |
Detection and characterisation of disbonds on Fibre Metal Laminate hybrid composites by flying laser spot thermography |
Articolo in rivista |
Vai |
| 2017 |
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds |
Articolo in rivista |
Vai |
| 2016 |
Detection, characterization and sizing of hydrogen induced cracking in pressure vessels using phased array ultrasonic data processing |
Contributo in atti di convegno pubblicato in rivista |
Vai |
| 2015 |
2D size, position and shape definition of defects by B-scan image analysis |
Articolo in rivista |
Vai |
| 2015 |
Influence of seamless pipes wall thickness variation for the effectiveness of Automated Ultrasonic Testing |
Proceedings |
Vai |
| 2015 |
Inspection of additive-manufactured layered components |
Articolo in rivista |
Vai |
| 2015 |
A case study on the evaluation of friction stir welds by ultrasonic inspection technique |
Proceedings |
Vai |
| 2014 |
PROPAGAZIONE DI ONDE DI RAYLEIGH LUNGO SUPERFICI CURVE: UNO STUDIO NUMERICO E SPERIMENTALE |
Proceedings |
Vai |
| 2014 |
Inspection of Laser Powder Deposited Layers |
Proceedings |
Vai |
| 2014 |
Numerical study for a new methodology of flaws detection in train axles |
Articolo in rivista |
Vai |
| 2013 |
Inspection of laser powder deposited layers |
Proceedings |
Vai |
| 2013 |
Surface waves on cylindrical solids: Numerical and experimental study |
Articolo in rivista |
Vai |
| 2013 |
Novel non-destructive inspection techniques for laser powder deposition inspection |
Proceedings |
Vai |
| 2013 |
Laser Ultrasonic Technique for Laser Powder Deposition Inspection |
Proceedings |
Vai |
| 2013 |
Defect detection in laser powder deposition components by laser thermography and laser ultrasonic inspections |
Proceedings |
Vai |
| 2013 |
Electronic properties of carbon nanotubes under torsion |
Articolo in rivista |
Vai |
| 2012 |
Real-time non-contact ultrasonic detection
of surface defects on objects moving at high speed |
Articolo in rivista |
Vai |
| 2012 |
Contact between the components of a knee prosthesis: numerical and experimental study |
Articolo in rivista |
Vai |
| 2012 |
Guided Wave Propagation in a Plate Edge and Application to NDI of Rail Base |
Articolo in rivista |
Vai |
| 2011 |
Studio numerico e sperimentale sulla generazione degli ultrasuoni tramite sorgente laser puntiforme |
Proceedings |
Vai |
| 2011 |
Development of a methodology for the detection of vertical split head defects in the rail |
Proceedings |
Vai |
| 2011 |
Influence of laser beam profile on the generation of ultrasonic waves |
Articolo in rivista |
Vai |
| 2010 |
PROPAGAZIONE DI ONDE GUIDATE IN LAMINATI MULTISTRATO INCOLLATI: ANALISI NUMERICA E SPERIMENTALE |
Proceedings |
Vai |
| 2010 |
3D simulations and experiments of guided wave propagation in adhesively
bonded multi-layered structures |
Articolo in rivista |
Vai |
| 2010 |
Rail and Joint Bar (Fish Plate) NDE Advances in North America |
Altro |
Vai |
| 2010 |
Experimental and Numerical Method for Nondestructive Ultrasonic Defect Detection |
Capitolo o Saggio |
Vai |
| 2009 |
Simulazione di propagazione di onde ultrasonore con applicazione ai controlli non distruttivi |
Proceedings |
Vai |
| 2009 |
The Development and Commissioning of a Laser-Based Ultrasonic Rail Inspection System |
Proceedings |
Vai |
| 2009 |
Evaluation of Clutch Plate Integrity with Non-Destructive Methods |
Proceedings |
Vai |
| 2009 |
Modello numerico per la simulazione e l’ottimizzazione di controlli non distruttivi con ultrasuoni |
Articolo in rivista |
Vai |
| 2009 |
Simulation of laser-generated ultrasonic wave propagation in solid media and air with application to NDE |
Articolo in rivista |
Vai |
| 2008 |
Simulation of laser generated ultrasound with application to defect detection |
Articolo in rivista |
Vai |
| 2008 |
Detection of disbonds in multilayer structures by laser-based ultrasonic technique |
Articolo in rivista |
Vai |
| 2007 |
Friction Stir Welding Inspection by Non-Contact Ultrasonic Technique |
Proceedings |
Vai |
| 2007 |
laser-based ultrasonic rail flaw inspection prototype: system overview and status |
Proceedings |
Vai |
| 2007 |
Misura della riduzione di spessore per corrosione in lamiere di alluminio mediante tecnica laser |
Proceedings |
Vai |
| 2007 |
Conceptual Design by Triz: an Application to a Rear Underrun Protective Device for Industrial Vehicle |
Proceedings |
Vai |
| 2007 |
Metodo ed apparecchiatura per l'ispezione dinamica non a contatto delle rotaie ferroviarie |
Brevetto |
Vai |
| 2007 |
Progettazione concettuale di dispositivo paraincastro posteriore per veicoli industriali |
Proceedings |
Vai |
| 2007 |
Adhesively bonded joints: evaluation of integrity |
Proceedings |
Vai |
| 2007 |
Controllo per il rilievo di difetti con tecnica ad ultrasuoni laser |
Proceedings |
Vai |
| 2007 |
Dynamic Rail Inspection by Vision System |
Proceedings |
Vai |
| 2006 |
Application of laser induced ultrasound for rail inspection |
Proceedings |
Vai |
| 2006 |
A NON-CONTACT ULTRASONIC SYSTEM FOR IN-FIELD RAIL TRACK INSPECTION |
Proceedings |
Vai |
| 2006 |
A Non-Contact Automated Vision and Positioning System for In-Field Rail NDE |
Proceedings |
Vai |
| 2006 |
Dynamic railroad inspection using the laser-air hybrid ultrasonic technique |
Articolo in rivista |
Vai |
| 2006 |
U-Rail laser-based ultrasonic inspection system prototype "system overview and status" |
Articolo in rivista |
Vai |
| 2006 |
Trials start with non-contact rail inspection |
Articolo in rivista |
Vai |
| 2006 |
Quantitative Evaluation of Defects in Adhesive-Bonded Joints by Non-contact Ultrasonic Techniques |
Proceedings |
Vai |
| 2006 |
Dynamic railroad inspection using the laser-air hybrid ultrasonic technique |
Proceedings |
Vai |
| 2006 |
Ispezione dinamica delle rotaie: un caso pratico |
Articolo in rivista |
Vai |
| 2006 |
Defect characterization in Al welded joints by non-contact Lamb wave technique |
Articolo in rivista |
Vai |
| 2006 |
Innovative quality controls on cold forged pieces |
Proceedings |
Vai |
| 2005 |
Sviluppo del prototipo basato su tecnologia laser ultrasuoni per l'ispezione dinamica delle rotaie |
Proceedings |
Vai |
| 2005 |
Laser-air hybrid ultrasonic technique for dynamic railroad inspection applications |
Articolo in rivista |
Vai |
| 2005 |
Laser-Generated Acoustic Signal Interaction with Surface Flaws on Rail Wheels |
Articolo in rivista |
Vai |
| 2004 |
Laser-air, hybrid, ultrasonic testing of railroad tracks |
Brevetto |
Vai |
| 2004 |
Guided wave non-contact ultrasonic for NDE |
Proceedings |
Vai |
| 2004 |
Nondestructive testing applications for the railroad |
Proceedings |
Vai |
| 2004 |
Laser-air, hybrid, ultrasonic testing of railroad wheels |
Brevetto |
Vai |
| 2004 |
Ultrasonic detection by photo-EMF sensor and by wideband air-coupled transducer |
Articolo in rivista |
Vai |
| 2004 |
Laser-air hybrid ultrasonic technique for dynamic railroad inspeection applications |
Proceedings |
Vai |
| 2004 |
Rail-falw detetion using a laser-based ultrasonic approach |
Abstract in rivista |
Vai |
| 2003 |
Proof of concept of wayside railroad wheel inspection using a laser-air hybrid ultrasonic technique |
Articolo in rivista |
Vai |
| 2003 |
Rail track field testing using laser/air hybrid ultrasonic technique |
Articolo in rivista |
Vai |
| 2002 |
Non-contact ultrasonic inspection of skin/core bond in honeycomb with lamb waves |
Proceedings |
Vai |
| 2001 |
Quantitative subsurface defect detection in composite materials using a non-contact ultrasonic system |
Proceedings |
Vai |
