2024 |
Influence of a biodegradable contaminant on the mechanical recycling of a low-density polyethylene sample |
Articolo in rivista |
Go to |
2024 |
Wood flour and hazelnut shells polylactide-based biocomposites for packaging applications: Characterization, photo-oxidation, and compost burial degradation |
Articolo in rivista |
Go to |
2024 |
Analysis on Isotropic and Anisotropic Samples of Polypropylene/Polyethyleneterephthalate Blend/Graphene Nanoplatelets Nanocomposites: Effects of a Rubbery Compatibilizer |
Articolo in rivista |
Go to |
2023 |
A Biodegradable, Bio-Based Polymer for the Production of Tools for Aquaculture: Processing, Properties and Biodegradation in Sea Water |
Articolo in rivista |
Go to |
2023 |
Influence of Different Environments and Temperatures on the Photo-Oxidation Behaviour of the Polypropylene |
Articolo in rivista |
Go to |
2023 |
Comparison of the Recycling Behavior of a Polypropylene Sample Aged in Air and in Marine Water |
Articolo in rivista |
Go to |
2023 |
A Green Approach for Recycling Compact Discs |
Articolo in rivista |
Go to |
2023 |
Recycling of a multilayer barrier food packaging through the use of a nanofiller: Effect of post-consumer plastic bag conditions |
Articolo in rivista |
Go to |
2023 |
Recyclability of a bio-based biocomposite under different reprocessing conditions |
Articolo in rivista |
Go to |
2023 |
Effect of biobased plasticizers, used as dispersing aids, on mechanical, rheological and thermal properties of micro fibrillated cellulose (MFC)/poly (lactic acid) (PLA) biocomposites over the time: how MFC controls the plasticizer migration? |
Articolo in rivista |
Go to |
2023 |
Influence of Branching on the Rheology, Filmability and Mechanical and Optical Properties of a Biodegradable and Compostable Co-Polyester |
Articolo in rivista |
Go to |
2023 |
Recycling of Heterogeneous Mixed Waste Polymers through Reactive Mixing |
Articolo in rivista |
Go to |
2023 |
Tailoring morphology and mechanical properties of PLA/PBSA blends optimizing the twin-screw extrusion processing parameters aided by a 1D simulation software |
Articolo in rivista |
Go to |
2022 |
The Use of Waste Hazelnut Shells as a Reinforcement in the Development of Green Biocomposites |
Articolo in rivista |
Go to |
2022 |
Biocomposite PBAT/lignin blown films with enhanced photo-stability |
Articolo in rivista |
Go to |
2022 |
Toward the Decarbonization of Plastic: Monopolymer Blend of Virgin and Recycled Bio-Based, Biodegradable Polymer |
Articolo in rivista |
Go to |
2022 |
MECHANICAL, RHEOLOGICAL AND THERMAL EVALUATION OF POLY(LACTIC ACID) (PLA)/MICRO FIBRILLATED CELLULOSE (MFC) PLASTICIZED BIOCOMPOSITES PRODUCED WITH FLAT DIE EXTRUSION AND CALENDERING |
Contributo in atti di convegno pubblicato in volume |
Go to |
2021 |
Rheological, mechanical and morphological characterization of monopolymer blends made by virgin and photo-oxidized polypropylene |
Articolo in rivista |
Go to |
2021 |
Biodegradable polymers for the production of nets for agricultural product packaging |
Articolo in rivista |
Go to |
2021 |
Effect of moisture content on the processing and mechanical properties of a biodegradable polyester |
Articolo in rivista |
Go to |
2021 |
Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications |
Articolo in rivista |
Go to |
2021 |
Structure–property relationships in bionanocomposites for pipe extrusion applications |
Articolo in rivista |
Go to |
2021 |
Bionanocomposite blown films: Insights on the rheological and mechanical behavior |
Articolo in rivista |
Go to |
2021 |
Use of biochar as filler for biocomposite blown films: Structure-processing-properties relationships |
Articolo in rivista |
Go to |
2021 |
Morphology, rheological and mechanical properties of isotropic and anisotropic PP/rPET/GnP nanocomposite samples |
Articolo in rivista |
Go to |
2021 |
PBAT based composites reinforced with microcrystalline cellulose obtained from softwood almond shells |
Articolo in rivista |
Go to |
2021 |
Preliminary evaluation of plasmix compound from plastics packaging waste for reuse in bituminous pavements |
Articolo in rivista |
Go to |
2021 |
Effect of an organoclay on the photochemical transformations of a PBAT/PLA blend and morpho-chemical features of crosslinked networks |
Articolo in rivista |
Go to |
2021 |
An overview of functionalized graphene nanomaterials for advanced applications |
Review essay (rassegna critica) |
Go to |
2021 |
Investigation on the properties and on the photo-oxidation behaviour of polypropylene/fumed silica nanocomposites |
Articolo in rivista |
Go to |
2021 |
An additive model to predict the rheological and mechanical properties of polypropylene blends made by virgin and reprocessed components |
Articolo in rivista |
Go to |
2020 |
Influence of short-term aging on mechanical properties and morphology of polymer-modified bitumen with recycled plastics from waste materials |
Articolo in rivista |
Go to |
2020 |
Recycling of a biodegradable polymer blend |
Articolo in rivista |
Go to |
2020 |
Effect of processing temperature and mixing time on the properties of PP/GnP nanocomposites |
Articolo in rivista |
Go to |
2020 |
Taking advantage of the functional synergism between carbon nanotubes and graphene nanoplatelets to obtain polypropylene-based nanocomposites with enhanced oxidative resistance |
Articolo in rivista |
Go to |
2020 |
The Effect of Calcium Carbonate on the Photo-Oxidative Behavior of Poly(butylene adipate-co-terephthalate) |
Articolo in rivista |
Go to |
2020 |
Fracture behavior and mechanical, thermal, and rheological properties of biodegradable films extruded by flat die and calender |
Articolo in rivista |
Go to |
2020 |
Comparative investigation on the soil burial degradation behaviour of polymer films for agriculture before and after photo-oxidation |
Articolo in rivista |
Go to |
2020 |
The effects of nanoclay on the mechanical properties, carvacrol release and degradation of a pla/pbat blend |
Articolo in rivista |
Go to |
2020 |
Effect of ultraviolet and moisture action on biodegradable polymers and their blend |
Articolo in rivista |
Go to |
2019 |
Compatibilization of Polypropylene/Polyamide 6 Blend Fibers Using Photo-Oxidized Polypropylene |
Articolo in rivista |
Go to |
2019 |
Photo-oxidation of polypropylene/graphene nanoplatelets composites |
Articolo in rivista |
Go to |
2019 |
Effect of environmental conditions on the durability of polycarbonate for the protection of cultural heritage sites |
Articolo in rivista |
Go to |
2019 |
Durability of biodegradable polymers for the conservation of cultural heritage |
Articolo in rivista |
Go to |
2019 |
Photo-oxidative and soil burial degradation of irrigation tubes based on biodegradable polymer blends |
Articolo in rivista |
Go to |
2019 |
A SOLUTION FOR QUARRY LIMESTONE DUST RECYCLING |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
Rheological Behaviour, Mechanical Properties and Processability of Biodegradable Polymer Systems for Film Blowing |
Articolo in rivista |
Go to |
2018 |
Non-isothermal elongational flow of polymer nanocomposites |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
Injection molding and mechanical properties of bio-based polymer nanocomposites |
Articolo in rivista |
Go to |
2018 |
Rheological and mechanical properties of biodegradable nanocomposites |
Contributo in atti di convegno pubblicato in volume |
Go to |
2018 |
Effect of the elongational flow on morphology and properties of polypropylene/graphene nanoplatelets nanocomposites |
Articolo in rivista |
Go to |
2018 |
Polypropylene/graphene nanoplatelets nanocomposites subjected to elongational flow |
Contributo in atti di convegno pubblicato in volume |
Go to |
2018 |
Quarry Limestone Dust as Fine Aggregate for Concrete |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
Thermomechanical degradation of PP based nanocomposites filled with graphene nanoplatelets |
Proceedings |
Go to |
2018 |
Environmental degradation of polymers for cultural heritage |
Poster pubblicato in volume |
Go to |
2018 |
Effect of graphene nanoplatelets on the photo-oxidative behavior of PP based nanocomposites |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
Effetto del flusso elongazionale su nanocompositi a base di miscele polimeriche. |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
Effect of the UV exposure on the creep behaviour of PLA based green composites |
Abstract in atti di convegno pubblicato in volume |
Go to |
2018 |
"Compatibilization" through elongational flow processing of LDPE/PA6 blends |
Articolo in rivista |
Go to |
2018 |
Photo-oxidative behavior of PP/GnP nanocomposites |
Abstract in atti di convegno pubblicato in volume |
Go to |
2017 |
Effect of a compatibilizer on the morphology and properties of polypropylene/polyethylentherephthalate spun fibers |
Articolo in rivista |
Go to |
2017 |
Photooxidation behavior of a LDPE/clay nanocomposite monitored through creep measurements |
Articolo in rivista |
Go to |
2017 |
Non-linear viscoelastic behavior of polymer melts interpreted by fractional viscoelastic model |
Articolo in rivista |
Go to |
2017 |
Effect of cold drawing on mechanical properties of biodegradable fibers |
Articolo in rivista |
Go to |
2017 |
Degradation of polymer blends: A brief review |
Articolo in rivista |
Go to |
2017 |
Structure-properties relationships in melt reprocessed PLA/hydrotalcites nanocomposites |
Articolo in rivista |
Go to |
2017 |
Reprocessing of PLA based nanocomposites: Effect of nanofiller |
Abstract in atti di convegno pubblicato in rivista |
Go to |
2017 |
Mechanical response of PLA-based biocomposites under creep conditions |
Poster pubblicato in volume |
Go to |
2017 |
Sun radiation and temperature impact at different periods of the year on the photooxidation of polyethylene films |
Articolo in rivista |
Go to |
2017 |
Morphology and properties of compatibilized PP/PET melt spun fibers |
Abstract in atti di convegno pubblicato in volume |
Go to |
2017 |
BIODEGRADABLE BILAYER FILMS PREPARED BY CO-EXTRUSION |
Proceedings |
Go to |
2017 |
PHOTOOXIDATION BEHAVIOR OF POLYPROPYLENE NANOCOMPOSITES WITH MODIFIED HALLOYSITE |
Abstract in atti di convegno pubblicato in rivista |
Go to |
2017 |
Low-density polyethylene/polyamide/clay blend nanocomposites: Effect of morphology of clay on their photooxidation resistance |
Articolo in rivista |
Go to |
2016 |
A simple method to interpret the rheological behaviour of intercalated polymer nanocomposites |
Articolo in rivista |
Go to |
2016 |
Chlorides concentration and ph measurement of concrete structure through immersed sensors |
Proceedings |
Go to |
2016 |
A facile and eco-friendly route to fabricate poly(Lactic acid) scaffolds with graded pore size |
Articolo in rivista |
Go to |
2016 |
Effect of nano zinc oxide as UV stabilizer on the weathering performance of wood-polyethylene composite |
Articolo in rivista |
Go to |
2016 |
Biopolymer based nanocomposites reinforced with graphene nanoplatelets |
Proceedings |
Go to |
2016 |
In-line monitoring of the photooxidation behaviour of a PP/clay nanocomposite through creep measurements |
Articolo in rivista |
Go to |
2016 |
Effect of Hot Drawing on the Mechanical Properties of Biodegradable Fibers |
Articolo in rivista |
Go to |
2016 |
Creep response of a LDPE-based nanocomposite |
Articolo in rivista |
Go to |
2016 |
THERMOMECHANICAL DEGRADATION OF A POLYPROPYLENE/GRAPHENE NANOCOMPOSITE |
Abstract in atti di convegno pubblicato in rivista |
Go to |
2016 |
IN-LINE MONITORING OF THE PHOTOOXIDATION BEHAVIOUR OF PP/CLAY NANOCOMPOSITES THROUGH CREEP MEASUREMENTS |
Proceedings |
Go to |
2016 |
Effect of elongational flow and polarity of organomodified clay on morphology and mechanical properties of a PLA based nanobiocomposite |
Articolo in rivista |
Go to |
2016 |
Thermomechanical degradation of PLA-based nanobiocomposite |
Articolo in rivista |
Go to |
2016 |
Effect of the orientation on the photooxidation behaviour of polymer films |
Articolo in rivista |
Go to |
2016 |
Photooxidation and photostabilization of EVA and cross-linked EVA |
Articolo in rivista |
Go to |
2016 |
Photooxidation behaviour of LDPE/Clay nanocomposite measured through creep curves |
Proceedings |
Go to |
2016 |
Effect of graphene nanoplatelets on the physical and antimicrobial properties of biopolymer-based nanocomposites |
Articolo in rivista |
Go to |
2015 |
Processing and characterization of highly oriented fibres of biodegradable nanocomposites |
Articolo in rivista |
Go to |
2015 |
A model for the prediction of the flow curves from interlayer distance and vice versa for intercalated polymer and polymer blend nanocomposites |
Proceedings |
Go to |
2015 |
Effect of compatibilization on the photo-oxidation behaviour of polyethylene/polyamide 6 blends and their nanocomposites |
Articolo in rivista |
Go to |
2015 |
Morphology, rheology, and mechanical properties of a new nanobiocomposite |
Articolo in rivista |
Go to |
2015 |
Mechanical, thermomechanical and reprocessing behavior of green composites from biodegradable polymer and wood flour |
Articolo in rivista |
Go to |
2015 |
Effect of polarity and elongational flow on the morphology and properties of a new nanobiocomposite |
Proceedings |
Go to |
2015 |
Compatibilization of polyethylene/polyamide 6 blend nanocomposite films |
Articolo in rivista |
Go to |
2014 |
Orientation induced brittle – Ductile transition in a polyethylene/polyamide 6 blend |
Articolo in rivista |
Go to |
2014 |
Prediction of the flow curves of thermoplastic polymer/clay systems from torque data |
Articolo in rivista |
Go to |
2014 |
Effetto della filatura di un sistema polimerico biodegradabile
nanocomposito |
Proceedings |
Go to |
2014 |
Photooxidation and stabilization of a solar cell encapsulating crosslinked EVA |
Proceedings |
Go to |
2014 |
Effect of stress and temperature on the thermomechanical degradation of a PE-LD/OMMT nanocomposites |
Articolo in rivista |
Go to |
2014 |
Interaction in POSS-poly(ethylene-co-acrylic acid) nanocomposites |
Articolo in rivista |
Go to |
2014 |
Nanocompositi a base di polistirene e ossido di zinco: azione disperdente delle molecole POSS |
Proceedings |
Go to |
2014 |
Thermomechanical degradation of polyethylene/polyamide 6 blend-clay nanocomposites |
Articolo in rivista |
Go to |
2014 |
Rheological behaviour, filmability and mechanical properties of biodegradable polymer films |
Proceedings |
Go to |
2014 |
Recycling and Thermomechanical Degradation of LDPE/Modified Clay Nanocomposites |
Articolo in rivista |
Go to |
2014 |
Nanocompositi a base di copolimero stirene-butadiene-stirene e nanotubi di carbonio: morfologia e proprietà |
Proceedings |
Go to |
2014 |
Natural compounds as light stabilizer for a starch-based biodegradable polymer |
Articolo in rivista |
Go to |
2014 |
Rheological Behavior Under Shear and Non-Isothermal
Elongational Flow of Biodegradable Polymers for Foam Extrusion |
Articolo in rivista |
Go to |
2014 |
Effect of the orientation and rheological behaviour of biodegradable polymer nanocomposites |
Articolo in rivista |
Go to |
2014 |
Photo-oxidation behaviour and morphology of zinc oxide-poss polystyrene based nanocomposites |
Proceedings |
Go to |
2014 |
Miscele PE/PA6: transizione fragile-duttile indotta dall’orientazione |
Proceedings |
Go to |
2014 |
Effect of the compatibilization on the photooxidation of a PA6/LDPE blend and their clay nanocomposites |
Proceedings |
Go to |
2014 |
Performances and morphology of polyamide/carbonaceous structures based fibers |
Capitolo o Saggio |
Go to |
2014 |
Compatibilization of a polyethylene/polyamide 6 blend nanocomposite |
Proceedings |
Go to |
2013 |
Rheological and Mechanical Behavior of LDPE/Calcium Carbonate Nanocomposites and Microcomposites |
Articolo in rivista |
Go to |
2013 |
Processing – morphology – property relationships of polyamide 6/polyethylene blend–clay nanocomposites |
Articolo in rivista |
Go to |
2013 |
Effect of reprocessing on polyamide/polyolefin based nanocomposites |
Proceedings |
Go to |
2013 |
POSS-poly(ethylene-co-acrylic acid) nanocomposites: physical interaction |
Proceedings |
Go to |
2013 |
Rheological characterization of bio-degradable nanocomposites |
Proceedings |
Go to |
2013 |
Accelerated weathering of PP based nanocomposites: Effect of the coupling agent |
Articolo in rivista |
Go to |
2013 |
Rheological behaviour of PAN-based electrolytic gel containing tetrahexilammonium and magnesium iodide for photoeletrochemical applications |
Articolo in rivista |
Go to |
2013 |
Nanocomposites based on polystyrene and POSS molecules: properties and photo-stability |
Proceedings |
Go to |
2013 |
Effect of the nanotube aspect ratio and surface functionalization on the morphology and properties of multiwalled carbon nanotube polyamide-based fibers |
Articolo in rivista |
Go to |
2013 |
RECYCLING AND THERMOMECHANICAL DEGRADATION OF POLYETHYLENE/ORGANO-MODIFIED CLAY NANOCOMPOSITES |
Proceedings |
Go to |
2013 |
Fibre antimicrobiche per applicazioni chirurgiche |
Articolo in rivista |
Go to |
2013 |
Natural compounds as light stabilizers for biodegradable polymers |
Proceedings |
Go to |
2013 |
Biodegradation paths of Mater-Bi®/kenaf biodegradable composites |
Articolo in rivista |
Go to |
2013 |
Accelerated weathering of PP based nanocomposites: Effect of the presence of maleic anhydryde grafted polypropylene |
Articolo in rivista |
Go to |
2013 |
USE OF BIODEGRADABLE POLYMERS FOR FOAM EXTRUSION |
Proceedings |
Go to |
2013 |
Degradazione di nanocompositi polimerici |
Articolo in rivista |
Go to |
2012 |
Effect of multiple reprocessing cycles on the properties of polyethylene/Cloisite 15A nanocomposites |
Proceedings |
Go to |
2012 |
Il ruolo di molecole POSS(polyhedral oligomeric silsesquioxane) sulle relazioni proprietà struttura nei nanocompositi a base polistirenica |
Proceedings |
Go to |
2012 |
Anti-ossidanti naturali per polimeri biodegradabili |
Proceedings |
Go to |
2012 |
LAVORABILITA E PROPRIETA MECCANICHE DI POLIMERI BIODEGRADABILI |
Proceedings |
Go to |
2012 |
Effect of small amounts of poly(lactic acid) on the recycling of poly(ethyleneterephtalate) bottles |
Articolo in rivista |
Go to |
2012 |
Fibre a base di poliammide e nanotubi di carbonio: proprietà e morfologia |
Proceedings |
Go to |
2012 |
Rheological behaviour of PAN-based electrolytic gel for photoeletrochemical applications |
Proceedings |
Go to |
2012 |
Photo-oxidation resistance of polyethylene/carbon nanotubes composites: aspect ratio and surface functionalization effect |
Proceedings |
Go to |
2012 |
Presenza di PLA nel riciclo di PET |
Articolo in rivista |
Go to |
2012 |
FLUSSO ELONGAZIONALE NON ISOTERMO DI POLIMERI BIODEGRADABILI |
Proceedings |
Go to |
2012 |
Caratterizzazione reologica di sistemi biodegradabili nanocompositi |
Proceedings |
Go to |
2012 |
Understanding the physical and/or chemical interaction in POSS-poly(ethylene-co-acrylic acid) nanocomposites |
Proceedings |
Go to |
2012 |
Polymer electrolytes based on PAN and mixed salts for photoelectrochemical appilcations: formulation and characterization |
Proceedings |
Go to |
2012 |
Nanocompositi a base polimerica e molecole POSS: comportamento reologico e proprietà fisiche |
Proceedings |
Go to |
2012 |
Caratterizzazione di nanocompositi a base di polimero biodegradabile |
Proceedings |
Go to |
2012 |
Reactive melt blending of functionalized-MW/CNTs with polyolefin |
Capitolo o Saggio |
Go to |
2012 |
On the photo-oxidation behaviour of nano-filled polypropylene: role of the filler type and compatibilizer |
Proceedings |
Go to |
2012 |
Kenaf-filled biodegradable composites: rheological and mechanical behaviour |
Articolo in rivista |
Go to |
2012 |
Natural anti-oxidant additives for bio-degradable polymers |
Proceedings |
Go to |
2012 |
Effetto di differenti metodi di preparazione sulle proprietà morfologiche e fisiche di nanocompositi a base di miscele HDPE/PA6 |
Proceedings |
Go to |
2012 |
Properties and morphology of PA based filament loaded with MW-CNTs: effect of filler aspect ratio and surface functionalization |
Proceedings |
Go to |
2012 |
Processing and properties of biopolymer/polyhydroxyalkanoates blends |
Articolo in rivista |
Go to |
2012 |
Effetto dei cicli di lavorazione sulle proprietà di nanocompositi PE/Cloisite 15A |
Proceedings |
Go to |
2012 |
Structure-properties relationships of polyhedral oligomeric silsesquioxane (POSS) filled PS nanocomposites |
Articolo in rivista |
Go to |
2012 |
Morfologia e proprietà di nanocompositi a base di poliammide e CNTs: effetto della geometria e della funzionalizzazione superficiale |
Proceedings |
Go to |
2012 |
How the POSS molecules improve the UV stability of polystyrene based nanocomposites? |
Proceedings |
Go to |
2012 |
New phosphazene-based chain extenders containing allyl and epoxide groups |
Articolo in rivista |
Go to |
2012 |
Effect of reprocessing on the properties of Polyethylene/cloisite 15A nanocomposites |
Proceedings |
Go to |
2012 |
UV-stabilisation of polystyrene-based nanocomposites provided by polyhedral oligomeric silsesquioxanes (POSS) |
Articolo in rivista |
Go to |
2011 |
Ecocomposites obtained from MaterBi(R) and lignocellulosic fillers |
Proceedings |
Go to |
2011 |
Un nuovo strumento per misurare il comportamento al creep in condizioni reali di sistemi polimerici |
Proceedings |
Go to |
2011 |
The role of aspect ration in the mechanical properties of lignocellulosic ecocomposites obtained from MaterBi(R) |
Proceedings |
Go to |
2011 |
Effetto della presenza di piccoli quantitativi di PLA nel riciclo di contenitori in PET |
Proceedings |
Go to |
2011 |
Photo-oxidation behaviour of micro- and nano-filled polypropylene: effect of the filler type and compatibilizer precursor |
Proceedings |
Go to |
2011 |
Green composites: A brief review |
Articolo in rivista |
Go to |
2011 |
Effect of the extensional flow on the properties of oriented nanocomposite films for twist wrapping |
Articolo in rivista |
Go to |
2011 |
The role of the clay in morphology modification of the uncompatible polymer blends |
Proceedings |
Go to |
2011 |
Effect of kind and content of organo-modified clay on properties of PET nanocomposites |
Articolo in rivista |
Go to |
2011 |
Preparation and Recycling of Plasticized PLA |
Articolo in rivista |
Go to |
2011 |
The role of the disposition of the recycled polymer on the properties of films for greenhouses coverage |
Articolo in rivista |
Go to |
2011 |
Performance of MaterBi(R) based ecocomposites |
Proceedings |
Go to |
2011 |
On the role of extensional flow in morphology and properties modifications in MW-CNTs and
carbon black polyamide-based fibres |
Proceedings |
Go to |
2011 |
Influence of the morphology on the photo-oxidation behaviour of polymer based nanocomposites |
Proceedings |
Go to |
2011 |
Effect of different dispersing additives on the morphology and the properties of polyethylene-based nanocomposite films |
Articolo in rivista |
Go to |
2011 |
Relazione struttura-proprietà in nanocompositi POSS-PS |
Proceedings |
Go to |
2011 |
The role of filler type on the photo-oxidation behaviour of micro- and nano-filled polypropylene |
Articolo in rivista |
Go to |
2011 |
Morfologia e proprietà di sistemi nanocompositi poliammide/CNTs e poliammide/carbon black sottoposti a stiro elongazionale |
Proceedings |
Go to |
2011 |
On the role of extensional flow in morphology and property modifications of MWCNT/polyamide-based fibres |
Articolo in rivista |
Go to |
2011 |
Compositi polimerici biodegradabili con fibre di kenaf |
Proceedings |
Go to |
2011 |
The role of POSS on the structure-properties relationship in Polystyrene based nanocomposites |
Proceedings |
Go to |
2011 |
The role of elongational flow in morphology modification of Polyethylene/OMMT nanocomposite system |
Capitolo o Saggio |
Go to |
2011 |
Effect of elongational flow on morphology and properties of Polymer/CNTs nanocomposite fibres |
Articolo in rivista |
Go to |
2011 |
Morphology modification in nanofilled polymer based systems upon shear and elongational flow |
Proceedings |
Go to |
2011 |
Morphology and properties of CNTs and carbon black filled polyamide fibres |
Proceedings |
Go to |
2010 |
Photo-oxidation behaviour of polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of the photo-resistance through morphology modification |
Articolo in rivista |
Go to |
2010 |
Predicting the photoageing and photostabilization of polymer nanocomposites |
Capitolo o Saggio |
Go to |
2010 |
Morfologia e proprietà di fibre polimero/CNTs |
Proceedings |
Go to |
2010 |
Ruolo della reologia nelle evoluzioni morfologiche di miscele polimeriche immiscibili nano composite |
Proceedings |
Go to |
2010 |
Selective localization of organoclay and effects on the morphology and mechanical properties of LDPE/PA11 blends with distributed and co-continuous morphology |
Articolo in rivista |
Go to |
2010 |
Photo-oxidation Behaviour of EVA Antimicrobial Films |
Proceedings |
Go to |
2010 |
The role of different dispersing additives in the photo-oxidation behaviour of polyolefin-based OMMT nanocomposites |
Proceedings |
Go to |
2010 |
GREEN COMPOSITES BASED ON BIODEGRADABLE POLYMERS AND WOOD FLOUR |
Capitolo o Saggio |
Go to |
2010 |
Effect of Different Matrices and Nanofillers on the Rheological Behavior of Polymer-Clay Nanocomposites |
Articolo in rivista |
Go to |
2010 |
Morphology modification of polymer-filled nanocomposites subjected to non-isothermal elongational flow |
Proceedings |
Go to |
2010 |
Using organoclay to promote morphology refinement and co-continuity in high-density polyethylene/polyamide 6 blends - Effect of filler content and polymer matrix composition |
Articolo in rivista |
Go to |
2010 |
Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino |
Brevetto |
Go to |
2010 |
MECHANICAL PROPERTIES AND BIODEGRADABILITY OF MATER-BI®/WOOD FLOUR ECOCOMPOSITES |
Proceedings |
Go to |
2010 |
Influence of PLA on the recycling of PET bottles |
Proceedings |
Go to |
2010 |
Photooxidative behaviour of polyethylene/polyamide-6 blends |
Articolo in rivista |
Go to |
2010 |
Photo-oxidation of nano- and micro-filled polypropylene |
Proceedings |
Go to |
2010 |
Stabilizzazione |
Capitolo o Saggio |
Go to |
2010 |
Morphology and properties of polyamide/CNTs nanocomposite fibres |
Proceedings |
Go to |
2010 |
Influence of Nisin on Photo-stability of EVA Antimicrobial Films |
Proceedings |
Go to |
2010 |
Imballaggi antimicrobici estrusi |
Articolo in rivista |
Go to |
2010 |
Invecchiamento naturale e durabilità dei materiali polimerici |
Capitolo o Saggio |
Go to |
2010 |
Patent number PA2010 A 000023: Sistema biocompatibile di supporto per la piantumazione di organismi vegetali in ambiente marino |
Brevetto |
Go to |
2010 |
Nuova cassetta in Polistirene Espanso (EPS) per il trasporto del pesce |
Brevetto |
Go to |
2010 |
Preparation and characterization of polyamide 6/polyethylene blend-clay nanocomposites in the presence of compatibilisers and stabilizing system |
Articolo in rivista |
Go to |
2009 |
Polyethylene/clay nanocomposite: morphology and mechanical properties modification under convergent flow |
Proceedings |
Go to |
2009 |
The role of the matrix-filler affinity on the morphology and properties of polyethylene/clay and polyethylene/compatibilizer/clay nanocomposites drawn fibres |
Articolo in rivista |
Go to |
2009 |
preparazione e caratterizzazione di nanocompositi polimero/CNTs sottoposti a stiro elongazionale |
Proceedings |
Go to |
2009 |
Biodegradable polymer-wood flour composites: main properties and biodegradability |
Proceedings |
Go to |
2009 |
Antimicrobial activity of EVA blown films containing nisin |
Proceedings |
Go to |
2009 |
Photo-oxidation behaviour of polyethylene/multi-walled carbon nanotube composite films |
Articolo in rivista |
Go to |
2009 |
Effetto del flusso elongazionale su sistemi nanocompositi a matrice polimerica e silicati: morfologia e proprietà meccaniche |
Articolo in rivista |
Go to |
2009 |
ECOCOMPOSITI MATER-BI®/FARINA DI LEGNO: OTTIMIZZAZIONE DELLE PROPRIETA’ ATTRAVERSO ANALISI STATISTICA E BIODEGRADAZIONE |
Proceedings |
Go to |
2009 |
Preparazione e lavorabilità per estrusione e stampaggio ad iniezione di PLA |
Proceedings |
Go to |
2009 |
UNEVEN DISTRIBUTION OF ORGANOCLAY IN HDPE/PA6 BLENDS - IMPACT OF MICROSTRUCTURE AND MECHANICAL BEHAVIOUR |
Proceedings |
Go to |
2009 |
The role of organoclay in the morphology modification and in the properties in polyethylene/polyamide blend systems |
Proceedings |
Go to |
2009 |
Morphology modification of a polyethylene/clay nanocomposite samples under convergent flow |
Articolo in rivista |
Go to |
2009 |
Film di EVA con attività antibatterica |
Proceedings |
Go to |
2009 |
Effect of the processing techniques on the properties of ecocomposites based on vegetable oil-derived Mater-Bi® and wood flour |
Articolo in rivista |
Go to |
2009 |
Formulation of Agricultural Films by Using of the Recycled Polymers: Resistance to the Photoxidation |
Capitolo o Saggio |
Go to |
2009 |
Clay nanocomposites based on compatibilized PA6/HDPE blends |
Proceedings |
Go to |
2009 |
Photo-oxidation of polyolefin/clay nanocomposite films: role of organoclay and matrix type |
Proceedings |
Go to |
2009 |
Degradation and stabilization of the polyolefins and of the filled-polyolefins |
Proceedings |
Go to |
2009 |
Processing and characterization of the polymer/CNTs nancomposite fibres |
Proceedings |
Go to |
2009 |
Properties-morphology-processing relationships in polymer based clay nanocomposites |
Proceedings |
Go to |
2009 |
Morphology and mechanical properties of nanofilled polymer blends |
Proceedings |
Go to |
2009 |
On the use of polyolefins based nanocomposites for film blowing applications |
Capitolo o Saggio |
Go to |
2009 |
Characterization of polyethylene/calcium carbonate nanocomposites |
Proceedings |
Go to |
2009 |
Relazione proprietà-morfologia-parametri di processo in materiali nanocompositi a matrice polimerica |
Proceedings |
Go to |
2009 |
Ecocompositi MaterBi (R)/Farina di legno: ottimizzazione delle proprietà attraverso analisi statistica |
Proceedings |
Go to |
2009 |
Morphology modification of a polyethylene/clay nanocomposite samples under convergent flow |
Proceedings |
Go to |
2009 |
Effect of extrusion and photoxidation on polyethylene/clay nanocomposites |
Articolo in rivista |
Go to |
2009 |
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer |
Articolo in rivista |
Go to |
2009 |
Preparation and characterization of polyolefin- based nanocomposite blown films for agricultural applications |
Articolo in rivista |
Go to |
2009 |
Mechanism of formation of char coating in LDPE/organoclay nanocomposites |
Proceedings |
Go to |
2009 |
Photo-degradation behaviour of OMMT-filled PE/PA blends: improvement of the photo-resistance through morphology modification |
Proceedings |
Go to |
2009 |
Lavorazione e caratterizzazioni di film twist nanocompositi |
Proceedings |
Go to |
2009 |
Polyolefin based nanocomposites: a method to achieve better dispersion of nanoclays in PE films and improve their physical properties |
Proceedings |
Go to |
2009 |
Caratterizzazione di nanocompositi polietilene/carbonato di calcio |
Proceedings |
Go to |
2009 |
Polyethylene/clay nanocomposites with or without compatibilizer: effect of extensional flow |
Proceedings |
Go to |
2009 |
Degradation od Mater-Bi/wood flour biocomposites in active sewage sludge |
Articolo in rivista |
Go to |
2009 |
Polymer-based 'green' composites |
Proceedings |
Go to |
2009 |
Effect of heating of organo-montmorillonites under different atmospheres |
Articolo in rivista |
Go to |
2009 |
The role of organoclay and matrix type in photo-oxidation of poliolefin/clay nanocomposite films |
Articolo in rivista |
Go to |
2009 |
Characterization of annealed LDPE/clay nanocomposites |
Proceedings |
Go to |
2009 |
Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of stabilizers |
Articolo in rivista |
Go to |
2008 |
Mechanical behaviour of Mater-Bi/wood flour composites: a statistical approach |
Articolo in rivista |
Go to |
2008 |
Polyolefin/clay nanocomposite drawn fibres with and without compatibilizer: structural analyses and mechanical performance |
Proceedings |
Go to |
2008 |
Effect of the elongational flow on the morphology and on the properties of polyethylene based nanocomposites |
Proceedings |
Go to |
2008 |
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier |
Articolo in rivista |
Go to |
2008 |
Influenza del flusso convergente in sistemi nanocompositi a matrice polietilenica |
Proceedings |
Go to |
2008 |
Clay-based polymer nanocomposites: photoxidation and stabilisation |
Proceedings |
Go to |
2008 |
Relazioni proprietà-morfologia-lavorazione in materiali nanocompositi a matrice polimerica |
Proceedings |
Go to |
2008 |
Effetto del flusso elongazionale sulle proprietà e sulla morfologia di filamenti di nanocomposito a base di polietilene e montmorillonite organo-modificata |
Proceedings |
Go to |
2008 |
Accelerated weathering of polypropylene/wood flour composites |
Articolo in rivista |
Go to |
2008 |
Photo-oxidation behaviour of composite polyethylene/MW-CNTs films |
Proceedings |
Go to |
2008 |
Photo-oxidation behaviour of composite polyethylene/MW-CNTs |
Proceedings |
Go to |
2008 |
Effetto della degradazione di un'argilla organicamente modificata sulle proprietà di nanocompositi a base di miscele PA6/HDPE |
Proceedings |
Go to |
2008 |
Photochemical stabilization of LLDPE/clay nanocomposites: towards durable nanocomposites |
Articolo in rivista |
Go to |
2008 |
CHARACTERIZATION AND PROCESSABILITY NOF POLYESTER BASED NANOCOMPOSITES |
Proceedings |
Go to |
2008 |
EFFECT OF ORGANOCLAY ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF POLYETHYLENE/POLYAMIDE BLENDS |
Proceedings |
Go to |
2008 |
Utilizzo di materiali riciclati per la produzione di film agricoli per copertura: resistenza alla foto-ossidazione |
Proceedings |
Go to |
2008 |
Influenza delle lavorazioni sulle proprietà di compositi a base di polimeri biodegradabili e farina di legno |
Proceedings |
Go to |
2008 |
CARATTERIZZAZIONE E LAVORABILITA DI NANOCOMPOSITI A MATRICE POLIESTERE |
Proceedings |
Go to |
2008 |
Processability and biodegradation of wood/biopolymer composites |
Proceedings |
Go to |
2008 |
Caratterizzazione e lavorabilità di nanocompositi a matrice poliestere |
Proceedings |
Go to |
2008 |
PREPARATION AND CHARACTERIZATION OF CLAY NANOCOMPOSITES BASED ON COMPATIBILIZED POLYAMMIDE6/POLYETHYLENE BLENDS |
Proceedings |
Go to |
2008 |
Improvement of the photo-stability of nanocomposite based LDPE/EVA films |
Proceedings |
Go to |
2008 |
Influenza di argille organomodificate su morfologia e proprietà di miscele polimeriche polietilene/poliammide |
Proceedings |
Go to |
2008 |
Formulation of agricultural films by using of the recycled polymers: resistance to the photo-oxidation |
Proceedings |
Go to |
2008 |
Preparazione e caratterizzazione di film poliolefinici nanocompositi per applicazioni in agricoltura |
Proceedings |
Go to |
2008 |
Effect of adding wood flour to the physical properties of a biodegradable polymer |
Articolo in rivista |
Go to |
2008 |
Nanocompositi a base di miscele compatibilizate PA6/PE: effetto della degradazione del modificante organico dell'argilla |
Proceedings |
Go to |
2008 |
Influence Of Clay Thermal Degradation On Polyethylene Based Nanocomposite |
Proceedings |
Go to |
2008 |
Morphology and properties of polyethylene-clay nanocomposites drawn fibres |
Articolo in rivista |
Go to |
2008 |
The Role of Organoclay in Promoting Co-continuous Morphology in High-Density Poly(ethylene)/Poly(amide) 6 Blend |
Articolo in rivista |
Go to |
2008 |
Rheological Behaviour of polyolefin based nanocomposites in isothermal and non-isothermal elongational flow |
Proceedings |
Go to |
2008 |
Properties-morphology-processing relationships in polymer-based clay nanocomposites |
Proceedings |
Go to |
2008 |
Innovazione tecnologica nel Distretto Produttivo della Pesca di Mazara del Vallo |
Capitolo o Saggio |
Go to |
2008 |
Influence of the matrix on photo-oxidative degradation of polyolefin based nanocomposite films |
Proceedings |
Go to |
2008 |
Effect of the processing on polyethylene/clay nanocomposites |
Proceedings |
Go to |
2008 |
A new equipment to measure the combined effect of humidity, temperature, mechanical stress and UV exposure on the creep behaviour of polymers |
Articolo in rivista |
Go to |
2008 |
Film blowing of modified polyethylene |
Proceedings |
Go to |
2008 |
Characterization and biodegradability of biodegradable polymer-wood flour composites |
Proceedings |
Go to |
2008 |
Effect of the processing on the properties of biopolymer based composites filled with wood flour |
Articolo in rivista |
Go to |
2007 |
Photochemical behaviour of PE/PA blends |
Proceedings |
Go to |
2007 |
Optimisation of the processing conditions in the recycling of polycondensation polymers |
Articolo in rivista |
Go to |
2007 |
Improving the properties of polypropylene-wood flour composites by utilization of maleated adhesion promoters |
Articolo in rivista |
Go to |
2007 |
Durability of a strach-based biodegradable polymer |
Articolo in rivista |
Go to |
2007 |
LDPE/EVA/Clay nanocomposites: prcessability and properties |
Proceedings |
Go to |
2007 |
Photo-stability of LDPE/EVA – based nanocomposite films |
Proceedings |
Go to |
2007 |
Utilisation of polyhydroxyalkanoates for biodegradable polymer blends: properties and application |
Proceedings |
Go to |
2007 |
Characterization of biobased composites filled with wood flour |
Proceedings |
Go to |
2007 |
Thermo-mechanical degradation of LDPE based nanocomposites |
Articolo in rivista |
Go to |
2007 |
Effect of the adding of a functionalized nanoclay in polyethylene/polyamide blends |
Proceedings |
Go to |
2007 |
Apparecchiatura per la misura della deformazione sotto carico |
Brevetto |
Go to |
2007 |
Photochenical behaviour of PE/PA polymer blends |
Proceedings |
Go to |
2007 |
Impiego di poliidrossialcanoati in miscele polimeriche: properietà ed applicazioni |
Proceedings |
Go to |
2007 |
R. Marino, N. Tzankova Dintcheva, F.P. La Mantia
LLDPE/caly/compatibilizers nanocomposites: rheological behaviour under shear and non-isothermal elongational flow |
Proceedings |
Go to |
2007 |
Polyethylene–clay nanocomposite: Effect of annealing under different atmospheres |
Proceedings |
Go to |
2007 |
Composites from biodegradable polymers and wood flour |
Proceedings |
Go to |
2007 |
Effect of annealing under different atmospheres on polyethylene-clay nanocomposites |
Proceedings |
Go to |
2007 |
Effect of annealing under different atmospheres on polyethylene-clay nanocomposite |
Proceedings |
Go to |
2007 |
LDPE/PA6/compatibilizer films: mechanical and rheological behaviour |
Proceedings |
Go to |
2007 |
Intercalation effects in LDPE/o-montmorillonites nanocomposites |
Articolo in rivista |
Go to |
2007 |
MECHANICAL PROPERTIES OF WOOD FLOUR FILLED BIOCOMPOSITES: A STATISTICAL APPROACH |
Altro |
Go to |
2007 |
Rheological Response of Polyethylene/Clay Nanocomposites to Annealing Treatment |
Articolo in rivista |
Go to |
2007 |
Role of oxyegen on rheological response of polyethylene–clay nanocomposites to annealing |
Proceedings |
Go to |
2007 |
LLDPE/caly/compatibilizers nanocomposites: rheological behaviour under shear and non-isothermal elongational flow |
Proceedings |
Go to |
2007 |
Characterization of green composites from biodegradable polymers and wood flour. |
Proceedings |
Go to |
2007 |
EFFETTO DI NANO-ARGILLE ORGANO-MODIFICATE E COMPATIBILIZZANTI SULLE PROPRIETA’ DI NANOCOMPOSITI A BASE DI LLDPE |
Proceedings |
Go to |
2007 |
Effect of adding an organically modified clay to a polyethylene/polyamide blend in the presence of compatibilizing agents |
Proceedings |
Go to |
2007 |
Role of oxygen on rheological response of polyethylene–clay nanocomposites to annealing |
Proceedings |
Go to |
2007 |
Foto-ossidazione di film nanocompositi a base LDPE/EVA |
Proceedings |
Go to |
2007 |
Eco-compositi a base di polietilene riciclato |
Articolo in rivista |
Go to |
2007 |
Morphology and properties of polyolefin/clay nanocomposites drawn fibers |
Proceedings |
Go to |
2007 |
Effect of elongational flow on the morphology and mechanical properties of LLDPE/clay nanocomposites |
Proceedings |
Go to |
2007 |
CHARACTERIZATION OF BIOPOLYMER BASED COMPOSITES FILLED WITH WOOD FLOUR. |
Proceedings |
Go to |
2007 |
Degradazione Di Argille Modificate Organicamente |
Proceedings |
Go to |
2007 |
Eco-compositi a base di polietilene riciclato e riempitivi naturali |
Articolo in rivista |
Go to |
2007 |
Morphology and properties of LDPE/PA-6 blends compatibilized with SEBS-g-MA and/or organoclay |
Proceedings |
Go to |
2007 |
Effect of the additive level and of the processing temperature on the re-building of post consumer pipes from polyethylene blends |
Articolo in rivista |
Go to |
2006 |
Compositi "verdi" a base di polimeri biodegradabili e riempitivi organico-naturali |
Proceedings |
Go to |
2006 |
Preparazione e caratterizzazione di polimeri biodegradabili coricati con riempitivi organico-naturali |
Proceedings |
Go to |
2006 |
Synthesis and Characterization of a New Fully Aromatic LCP |
Articolo in rivista |
Go to |
2006 |
Structure and dynamics of polyethylene/clay films |
Articolo in rivista |
Go to |
2006 |
Torque-rheometry investigation of model transreactions involving condensation polymers |
Articolo in rivista |
Go to |
2006 |
Proprietà meccaniche di compositi poliolefinici caricati con riempitivi organico-naturali: utilizzo di prmotori di adesione |
Proceedings |
Go to |
2006 |
Evolution of the morphology and characterzation of compatibilized PBT/EVA blends prepared by reactive extrusion |
Articolo in rivista |
Go to |
2006 |
Durabilità dei film polimerici biodegradabili |
Proceedings |
Go to |
2006 |
On the Preparation and the Characterization of Polyethylene/Polyamide Blends by Melt Processing in the Presence of an Ethylene(co)acrylic Acid Copolymer and of New Phosphazene Compounds |
Articolo in rivista |
Go to |
2006 |
Evolution of the Morphology and Characterization of Compatibilized PBT/EVA Blends Prepared by Reactive Extrusion |
Proceedings |
Go to |
2006 |
Improving the mechanical properties of polyolefin-natural organic filler composites |
Proceedings |
Go to |
2006 |
Compatibilization of HDPE/organoclay nanocomposites by functionalized polyethylenes |
Proceedings |
Go to |
2006 |
Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples |
Articolo in rivista |
Go to |
2006 |
Proprietà meccaniche di composti poliolefinici caricati con riempitivi organico-natural: utilizo di promotori di adesione |
Proceedings |
Go to |
2006 |
Modification of viscoelastic properties of polyethylene based nanocomposites after thermal treatment |
Proceedings |
Go to |
2006 |
Effect of adding new phosphazene compounds in polybutyleneterephthalate/polyamide blends. II: Effect of difefrent polyamides on the properties of extruded samples |
Articolo in rivista |
Go to |
2006 |
Effect of C18 amine modifiers on the properties of LDPE-Montmorillonite nanocomposites |
Proceedings |
Go to |
2006 |
Green Composites of Biodegradable Polymers and Natural Organic Fillers |
Proceedings |
Go to |
2006 |
Thermal treatment dependent rheological properties of polyethylene based nanocomposites |
Proceedings |
Go to |
2006 |
Mechanical properties of recycled polyethylene ecocomposites filled with natural organic fillers |
Articolo in rivista |
Go to |
2006 |
Evolution of the Morphology and Characterization of Compatibilized PBT/EVA Blends Prepared by Reactive Extrusion |
Articolo in rivista |
Go to |
2006 |
Rheology of poly(ethylene)-based nanocomposite films for agricultural applications |
Proceedings |
Go to |
2006 |
Proprietà meccaniche di miscele poliammide/poliolefine in presenza di ciclofosfazeni |
Proceedings |
Go to |
2006 |
Injection moulding of recycled polyethylene-natural organuc fillers composites |
Proceedings |
Go to |
2006 |
EVA copolymer based nanocomposites: rheological behavior under shear and isothermal and non-isothermal elongational flow |
Articolo in rivista |
Go to |
2006 |
Morphology of Polyamide/Polyethylene Blends in Presence of Nanoclay |
Proceedings |
Go to |
2006 |
Preparazione e caratterizazione di polimeri biodegradabili caricati con riempitivi organico-naturali |
Proceedings |
Go to |
2006 |
Photo-oxidation and improving of the photo-resistance of LLDPE based nanocomposites |
Proceedings |
Go to |
2006 |
Annealing time dependent rheological properties of polyethylene based nanocomposites |
Proceedings |
Go to |
2006 |
Design and Eco-design in wine industry |
Capitolo o Saggio |
Go to |
2006 |
Preparazione e caratterizzazione di polimeri biodegradabili caricati con riempitivi naturali |
Proceedings |
Go to |
2006 |
Organoclay nanocomposites from ethylene-acrylic acid copolymers |
Articolo in rivista |
Go to |
2006 |
Improvement of photo-stability of LLDPE-based nanocomposites |
Articolo in rivista |
Go to |
2006 |
Degradazione termomeccanica di nanocompositi a base poliolefinica |
Proceedings |
Go to |
2006 |
Proprietà meccaniche di compositi poliolefinici caricati con riempitivi organico-naturali: utilizzo di promotori di adesione |
Proceedings |
Go to |
2006 |
Thermo-mechanical degradation of LDPE based nanocomposites |
Proceedings |
Go to |
2006 |
Preparazione e caratterizzazione di polimeri biodegradabili caricati con riempitivi organico-naturali |
Proceedings |
Go to |
2006 |
Nanocompositi e microcompositi: lavorabilità e proprietà meccaniche |
Articolo in rivista |
Go to |
2006 |
Film blowing of modified polyethylene |
Proceedings |
Go to |
2006 |
Effect of thermal treatment time on the rheological behaviour of PE based nanocomposites |
Proceedings |
Go to |
2006 |
On the effectiveness of different additives and concentrations on the re-building of the molecular structure of degraded polyethylene |
Articolo in rivista |
Go to |
2005 |
Thermo and Photo Oxidative Stability and Improved Processability of Polyamide Stabilized with a New Functional Additive |
Articolo in rivista |
Go to |
2005 |
Ecocompositi polimeri caricati con riempitivi organico-naturali |
Proceedings |
Go to |
2005 |
Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber: Mechanical and rheological analysis |
Articolo in rivista |
Go to |
2005 |
Processing and mechanical properties of organic filer-polypropylene composites |
Articolo in rivista |
Go to |
2005 |
Lavorazione e proprietà meccaniche di polipropilene con cariche organiche |
Articolo in rivista |
Go to |
2005 |
Preparazione e Caratterizzazione di Nancompositi a base di LDPE/LLDPE-EVA e Montmorilloniti Organofile |
Altro |
Go to |
2005 |
Properties of recycled polyethylene/organic fillers green composites |
Proceedings |
Go to |
2005 |
Nanocomposites from Poly(Ethylene-co-Acrylic Acid) Copolymers and a Zn-Ionomer |
Altro |
Go to |
2005 |
Characterization of organic fillers-polypropylene composites |
Altro |
Go to |
2005 |
Lavorazione e proprietà meccaniche del polipropilene con cariche organiche |
Articolo in rivista |
Go to |
2005 |
Photooxidation and Durability of PE Based Nanocomposites |
Proceedings |
Go to |
2005 |
Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow |
Articolo in rivista |
Go to |
2005 |
Formulation, Characterization and Optimization of the Processing Conditions of Blends of Recycled Polyethylene and Ground Tyre Rubbers: Mechanical and Rheological Analysis |
Articolo in rivista |
Go to |
2005 |
Re-gradation of Photo-oxidized Post-consumer Greenhouse Films |
Articolo in rivista |
Go to |
2005 |
Effect of thermal cycles on the rheological behaviour of polymerclay nanocomposites |
Proceedings |
Go to |
2005 |
Film Nanocompositi Polimerici |
Proceedings |
Go to |
2005 |
Procedimento per la produzione di carboni attivi e attrezzatura per attuare il procedimento |
Brevetto |
Go to |
2005 |
Proyectar para el ambiente |
Articolo in rivista |
Go to |
2005 |
EVA Copolymer Based Nanocomposites: Rheological Behavior Under Shear and Isothermal and Non-Isothermal Elongational Flow |
Altro |
Go to |
2005 |
EVA Copolymer Based Nanocomposites: Rheological Behavior Under Shear and Elongational Flow |
Altro |
Go to |
2005 |
Film blowing and characterization of PA6/LDPE blends |
Altro |
Go to |
2005 |
Nanocompositi da Polietileni e Copolimeri PE-g-MA con Diversa Struttura Molecolare |
Proceedings |
Go to |
2005 |
Filmability and properties of compatibilized PA6/LDPE blends |
Articolo in rivista |
Go to |
2005 |
Recycling of inside upholstery of end-of-life cars |
Articolo in rivista |
Go to |
2005 |
Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. I: Preliminary study in a batch mixer |
Articolo in rivista |
Go to |
2005 |
Morphology of Nanocomposites from Ethylene-Acrylic Acid Copolymers |
Articolo in rivista |
Go to |
2005 |
Effetto della Polarità dei Componenti sulle Proprietà di Nanocompositi |
Proceedings |
Go to |
2005 |
Photooxidation and durability of PE based nanocopomsites |
Proceedings |
Go to |
2005 |
Processability and Properties of Re-graded, Photo-Oxidized Post-consumer Greenhouse Films |
Articolo in rivista |
Go to |
2004 |
Injection moldability and properties of compatibilized PA6/LDPE blends |
Articolo in rivista |
Go to |
2004 |
Compositi Verdi: Miscele Post-Consumo Polietilene/Polipropilene con Fibre di Legno |
Articolo in rivista |
Go to |
2004 |
On the use of natural organic materials as fillers for recycled post-consumer plastics |
Capitolo o Saggio |
Go to |
2004 |
Materiali Compositi a Base di Polipropilene e Cariche Organiche Naturali: Proprietà e Applicazioni |
Proceedings |
Go to |
2004 |
The antioxidant effect in controlling thermal degradation of a LDPE blow film |
Articolo in rivista |
Go to |
2004 |
Time-carbonyl groups equivalence in the photooxidative ageing of virgin/recycled polymer blends |
Articolo in rivista |
Go to |
2004 |
Photooxidation and Stabilization of Photooxidized Polyethylene and of its Monopolymer Blends |
Articolo in rivista |
Go to |
2004 |
Cyclophosphazenes as versatile substrates in polymer chemistry |
Articolo in rivista |
Go to |
2004 |
Effects Of Adding New Low Molecular Weight Phosphazene Compounds To PBT/Ny Blends |
Proceedings |
Go to |
2004 |
Ecocompositi polimerici: polietilene riciclato e cariche organiche naturali |
Proceedings |
Go to |
2004 |
Green composites of organic materials and recycled post-consumer polyethylene |
Articolo in rivista |
Go to |
2004 |
Reduction and reuse of waste: design and new generation plastics |
Proceedings |
Go to |
2004 |
Progettare per l'ambiente |
Articolo in rivista |
Go to |
2004 |
Formulazione e Caratterizzazione dei “Compositi verdi” a Base di Materie Plastiche Post-Consumo e Cariche Organiche |
Altro |
Go to |
2004 |
Reactive compatibilization of PBT/EVA blends with an ethylene-acrylic acid copolymer and a low molecular mass bis-oxazoline |
Articolo in rivista |
Go to |
2004 |
On the use of natural inorganic materials as fillers for recycled post-consumer ploastics |
Articolo in rivista |
Go to |
2004 |
EVA-montmorillonite nanocomposites: effect of processing condition |
Articolo in rivista |
Go to |
2004 |
Photo-Re-Stabilization of Recycled Post-Consumer Films for Greenhouses |
Articolo in rivista |
Go to |
2004 |
Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow |
Proceedings |
Go to |
2004 |
On the use of natural organic materials as fillers for recycled post-consumer plastices |
Capitolo o Saggio |
Go to |
2004 |
Envirinmental-friendly design from renewable resources |
Articolo in rivista |
Go to |
2004 |
Compositi polimerici con riempitivi organico-naturali |
Articolo in rivista |
Go to |
2004 |
Recycling of RPE/ Ground Tire Rubber Blends: Properties and Applications |
Proceedings |
Go to |
2004 |
Reactive Compatibilization of PBT/EVA Blends with an Ethylene‐Acrylic Acid Copolymer and a Low Molar Mass Bis‐Oxazoline |
Proceedings |
Go to |
2004 |
Photo-re-stabilization of recycled post-consumer films from greenhouses |
Articolo in rivista |
Go to |
2004 |
Compatibilization of PBT/EVA blends |
Proceedings |
Go to |
2004 |
Effects of polymer blends composition on the kinetics of degradation processes |
Altro |
Go to |
2004 |
Regradation of Photooxidized Post-Consumer Greenhouse Films |
Proceedings |
Go to |
2004 |
Effects of a new multifunctional additive on the thermo-stability, photo-stability and on the processability of the polyamide 6 |
Proceedings |
Go to |
2004 |
Polymer mechanical recycling: downcycling or upcycling? |
Articolo in rivista |
Go to |
2003 |
Sustainable design: study of the life cycle assessment of the production and packaging of wine |
Contributo in atti di convegno pubblicato in volume |
Go to |
2003 |
Compression and injection molding of recycled polyethylene for greenhouses in presence of the natural fibers |
Proceedings |
Go to |
2003 |
Cyclophosphazenes as polymer modifiers |
Articolo in rivista |
Go to |
2003 |
Morphology and mechanical properties of extruded ribbons of LDPE/PA6 blends compatibilized with an ethylene-acrylic acid copolymer |
Articolo in rivista |
Go to |
2003 |
Green Composites a base di materie plastiche post-consumo e cariche organiche naturali |
Proceedings |
Go to |
2003 |
Compositi Verdi con Polietilene Riciclato e Cariche Organiche |
Articolo in rivista |
Go to |
2003 |
Compression and injection molding of recycled polyethylene for greenhouses in presence of the natural fibres |
Proceedings |
Go to |
2003 |
Thermomechanical degradation of filled polypropylene |
Articolo in rivista |
Go to |
2003 |
Reactive compatibilization of PA6/LDPE blends with an ethylene–acrylic acid copolymer and a low molar mass bis-oxazoline |
Articolo in rivista |
Go to |
2002 |
Recycling of a starch-based biodegradable polymer |
Articolo in rivista |
Go to |
2002 |
Oxazoline-containing compatibilizers for polyamide/SAN and polyamide/ABS blends |
Articolo in rivista |
Go to |
2002 |
Characterization of monopolymer blend of virgin and recycled polyamide 6 |
Articolo in rivista |
Go to |
2002 |
Reprocessing and restabilization of greenhouse films |
Articolo in rivista |
Go to |
2002 |
Recycling of dry and wet polyamide 6 |
Articolo in rivista |
Go to |
2002 |
Melt stabilization of wet polyamide 6 |
Articolo in rivista |
Go to |
2001 |
Oxazoline functionalization of polyethylenes and their blends with polyamides and polyesters |
Articolo in rivista |
Go to |
2001 |
Effects of filler type and processing apparatus on the properties of the recycled "Light fraction" from municipal post-consumer plastics |
Articolo in rivista |
Go to |
2001 |
Modification of EVOH copolymers with e-caprolactone: synthesis and compatibilization effects in PE/PVC blends |
Articolo in rivista |
Go to |
2001 |
Characterization and reprocessing of greenhouse films |
Articolo in rivista |
Go to |
2000 |
On the modification of the nitrile groups of acrylonitrile/butadiene/styrene into oxazoline in the melt |
Articolo in rivista |
Go to |
2000 |
On the mechanism of compatibilization of polyolefin/liquid crystalline polymer blends with graft copolymers |
Articolo in rivista |
Go to |
1999 |
Effect of the Orientation on the Properties of Compatibilized Polypropylene/Liquid Crystal Polymer Blends |
Articolo in rivista |
Go to |
1999 |
Effect of the components' molar mass and of the mixing conditions on the compatibilization of PE-LCP blends by PE-g-LCP copolymers |
Articolo in rivista |
Go to |
1999 |
Use of PP-g-OXA in the compatibilization of PP/LCP blends |
Articolo in rivista |
Go to |
1998 |
Characterization of a fiber-reinforced new fully aromatic liquid crystalline polymer |
Articolo in rivista |
Go to |
1998 |
Chemical Modification of Nitrile to Oxazoline Functionality on a Styrene-Acrylonitrile Copolymer in the Melt |
Articolo in rivista |
Go to |
1997 |
Reprocessing of polyethyleneterephthalate and characterisation of monopolymer blends of virgin and recycled polymers |
Articolo in rivista |
Go to |
1997 |
Recycling of plastics from packaging |
Articolo in rivista |
Go to |
1997 |
Characterization of a fiber reinforced semirigid liquid crystalline polymer |
Articolo in rivista |
Go to |
1996 |
Reactive blending of a functionalized polyethylene with a semiflexible liquid crystalline copolyester |
Articolo in rivista |
Go to |
1996 |
On the use of PET-LCP copolymers as compatibilizers for PET/LCP blends |
Articolo in rivista |
Go to |
1996 |
An investigation of the compatibilization of blends of polyethylene and a semirigid liquid crystalline polymer |
Articolo in rivista |
Go to |
1996 |
Effects of filler type and mixing method on the physical properties of a reinforced semirigid liquid crystal polymer |
Articolo in rivista |
Go to |
1996 |
Compatibilization of blends of polyethylene with a semirigid liquid crystalline polymer by PE-g-LCP copolymers |
Articolo in rivista |
Go to |
1996 |
Processing and characterization of blends of fluoroelastomers with semirigid liquid crystal polymers |
Articolo in rivista |
Go to |